SIST EN 3745-412:2022

SLOVENSKI STANDARD
SIST EN 3745-412:2022
01-julij-2022
Nadomešča:
SIST EN 3745-412:2006
Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne
metode - 412. del: Odpornost proti vlagi
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412:
Humidity resistance
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil
412: Beständigkeit gegen Feuchtigkeit
Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais
- Partie 412 : Résistance à l'humidité
Ta slovenski standard je istoveten z: EN 3745-412:2022
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3745-412:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3745-412:2022

---------------------- Page: 2 ----------------------
SIST EN 3745-412:2022


EN 3745-412
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2022
EUROPÄISCHE NORM
ICS 49.090 Supersedes EN 3745-412:2005
English Version

Aerospace series - Fibres and cables, optical, aircraft use -
Test methods - Part 412: Humidity resistance
Série aérospatiale - Fibres et câbles optiques à usage Luft- und Raumfahrt - Faseroptische Leitungen für
aéronautique - Méthodes d'essais - Partie 412 : Luftfahrzeuge - Prüfverfahren - Teil 412: Beständigkeit
Résistance à l'humidité gegen Feuchtigkeit
This European Standard was approved by CEN on 10 January 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3745-412:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 3745-412:2022
EN 3745-412:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of specimen . 4
5 Apparatus . 5
6 Method . 5
6.1 Procedure . 5
6.2 Final measurements and requirements . 5
Bibliography . 7

2

---------------------- Page: 4 ----------------------
SIST EN 3745-412:2022
EN 3745-412:2022 (E)
European foreword
This document (EN 3745-412:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its pres
...