iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 10058:2004

(Main)

Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions

Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions

This European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled steel flat bars for general purposes.
This standard is not applicable to spring leaves, see EN 10092-1.

Warmgewalzte Flachstäbe aus Stahl für allgemeine Verwendung - Maße, Formtoleranzen und Grenzabmaße

Diese Europäische Norm legt die Nennmaße, Grenzabmaße und Formtoleranzen für warmgewalzte Flachstäbe aus Stahl für allgemeine Verwendung fest.
Diese Norm gilt nicht für Flachstäbe für Federn, siehe EN 10092-1.

Plats en acier laminés a chaud pour usages généraux - Dimensions et tolérances sur la forme et les dimensions

La présente Norme européenne spécifie les dimensions nominales et les tolérances sur les dimensions et la forme des plats en acier laminés a chaud pour usages généraux.
La présente norme ne s'applique pas aux lames de ressorts, voir l'EN 10092-1.

Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions

General Information

Status
Withdrawn
Publication Date
31-May-2004
Withdrawal Date
13-Dec-2018
ICS
77.140.60 - Steel bars and rods
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-Dec-2018
Due Date
06-Jan-2019
Completion Date
14-Dec-2018
Directive
89/106/EEC - Construction products
Mandate
M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
Ref Project
EN 10058:2003 - Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions

Relations

Replaced By
SIST EN 10058:2019 - Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
Effective Date
05-Dec-2018
Replaced By
SIST EN 10058:2019 - Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
Effective Date
08-Jun-2022
Revised
SIST EN 10058:2019 - Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
Effective Date
23-Jan-2017

Buy Standard

EN 10058:2004EN 10058:2004
PreviousNext
Standard
EN 10058:2004
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensionsWarmgewalzte Flachstäbe aus Stahl für allgemeine Verwendung - Maße, Formtoleranzen und GrenzabmaßePlats en acier laminés a chaud pour usages généraux - Dimensions et tolérances sur la forme et les dimensionsHot rolled flat steel bars for general purposes - D
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 10058:2019(Main)
Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
EN 10058:2018

This European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled steel flat bars and steel wide flats for general purposes.
This standard is not applicable to spring leaves, see EN 10092-1.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9443:2018(Main)
Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
EN ISO 9443:2018

This International Standard specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal diameters dN from 5 mm to 200 mm. By agreement between manufacturer and purchaser, this International Standard may also be applied to other special profiles. This International Standard applies particularly to steels for engineering and structural applications and, by agreement, may also be applied to tool steels.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10263-1:2018(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
EN 10263-1:2017

1.1   This Part of EN 10263 specifies the general technical delivery conditions for round rod, round bars and wire for cold heading and cold extrusion made of:
a)   non alloy steels not intended for heat treatment after cold working, as specified in prEN 10263-2:2013;
b)   non alloy and alloy steels for case hardening, as specified in prEN 10263-3:2013;
c)   non alloy and alloy steels for quenching and tempering, as specified in prEN 10263-4:2013;
d)   stainless steels, as specified in prEN 10263-5:2013.
1.2   Parts 2,3 and 4 of this EN 10263 cover products having a diameter up to and including 100 mm.
Part 5 covers products having a diameter up to and including:
-   25 mm for ferritic and austenitic-ferritic steels;
-   50 mm for austenitic steels;
-   100 mm for martensitic steels.
1.3   In special cases supplementary requirements or deviations with respect to this European Standard may be agreed between the purchaser and the supplier at the time of enquiry and order (See Annex A).
1.4   The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10263-2:2018(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working
EN 10263-2:2017

1.1   This Part of EN 10263 is applicable to round rod and bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion without subsequent heat treatment on the final components.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10263-3:2018(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
EN 10263-3:2017

1.1   This Part of EN 10263 is applicable to round rod, round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion and subsequent case hardening treatment.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10263-4:2018(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering
EN 10263-4:2017

1.1   This Part of EN 10263 is applicable to round rod and round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading, cold extrusion, subsequent quenching and tempering and induction hardening or flame hardening.
1.2   prEN 10263-1:2013 is indispensable for this Part of EN 10263.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10263-5:2018(Main)
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
EN 10263-5:2017

1.1   This Part of EN 10263 is applicable to round rod, round bars and wire made of stainless steels intended for cold heading and cold extrusion having a diameter up to and including:
   25 mm for ferritic and austenitic-ferritic steels;
   50 mm for austenitic steels;
   100 mm for martensitic steels
1.2   prEN 10263-1:2013 is indispensable for the application of this part of EN 10263.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10273:2016(Main)
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10273:2016

This European Standard specifies the technical delivery conditions for hot rolled weldable steel bars for the construction of pressure equipment for use at elevated temperatures.
The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.
NOTE   Once this European Standard is published in the Official Journal of the European Union (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of the Pressure Equipment Directive 97/23/EC are satisfied, needs to be done.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10272:2016(Main)
Stainless steel bars for pressure purposes
EN 10272:2016

This document specifies the technical delivery conditions for hot and cold formed stainless steel bars for the construction of pressure equipment supplied in accordance with one of the process routes and surface finishes listed in Table 5.
The general technical delivery conditions in EN 10021 also apply.
NOTE   Once this European Standard is published in the EU Official Journal (OJEU) under Directive 97/23/EC, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 97/23/EC is limited to technical data of materials in this European Standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to be done.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10088-5:2009
Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
EN 10088-5:2009

The scope of this part of EN 10088 is to specify the technical delivery conditions for hot or cold formed bars, rods, wire, sections and bright products of standard and special grades of corrosion resisting stainless steels for construction purposes in addition to the general technical delivery conditions specified in EN 10021. This European Standard does not apply to components manufactured by further processing of the product forms listed in 1.1 with quality characteristics altered as a result of such further processing.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day