iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1433:2003/A1:2005

(Amendment)

Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity

Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity

2020-01-20: Originator of XML version: NEN (on behalf of NEN, ASI, DS, SFS, SIS, SN)

Entwässerungsrinnen für Verkehrsflächen - Klassifizierung, Bau-und Prüfgrundsätze, Kennzeichnung und Beurteilung der Konformität

Caniveaux hydrauliques pour l'évacuation des eaux dans les zones de circulation utilisées par les piétons et les vehicules - Classification, prescriptions de conception et d'essai, marquage et évaluation de la conformité

Padavinska kanalizacija na voznih površinah in na površinah za pešce - Klasifikacija, projektiranje in zahteve za preskušanje, označevanje in ovrednotenje skladnosti

General Information

Status
Published
Publication Date
31-Aug-2005
ICS
93.080.30 - Road equipment and installations
Technical Committee
IOVO - Water supply and waste water engineering
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2005
Due Date
01-Sep-2005
Completion Date
01-Sep-2005
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/118 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on waste water engineering products
Ref Project
EN 1433:2002/A1:2005 - Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity

Relations

Amends
SIST EN 1433:2003 - Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
Effective Date
22-Dec-2008

Buy Standard

EN 1433:2003/A1:2005 (EN)EN 1433:2003/A1:2005 (EN)
PreviousNext
Amendment
EN 1433:2003/A1:2005 (EN)
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN 1433:2003/A1:2005 (DE)EN 1433:2003/A1:2005 (DE)
PreviousNext
Amendment
EN 1433:2003/A1:2005 (DE)
German language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1433:2003/A1:2005
01-september-2005
3DGDYLQVNDNDQDOL]DFLMDQDYR]QLKSRYUãLQDKLQQDSRYUãLQDK]DSHãFH
.ODVLILNDFLMDSURMHNWLUDQMHLQ]DKWHYH]DSUHVNXãDQMHR]QDþHYDQMHLQRYUHGQRWHQMH
VNODGQRVWL
Drainage channels for vehicular and pedestrian areas - Classification, design and testing
requirements, marking and evaluation of conformity
Entwässerungsrinnen für Verkehrsflächen - Klassifizierung, Bau-und Prüfgrundsätze,
Kennzeichnung und Beurteilung der Konformität
Caniveaux hydrauliques pour l'évacuation des eaux dans les zones de circulation
utilisées par les piétons et les vehicules - Classification, prescriptions de conception et
d'essai, marquage et évaluation de la conformité
Ta slovenski standard je istoveten z: EN 1433:2002/A1:2005
ICS:
93.080.30
SIST EN 1433:2003/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 1433:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2005
ICS 93.080.30
English version
Drainage channels for vehicular and pedestrian areas -
Classification, design and testing requirements, marking and
evaluation of conformity
Caniveaux hydrauliques pour l'évacuation des eaux dans Entwässerungsrinnen für Verkehrsflächen - Klassifizierung,
les zones de circulation utilisées par les piétons et les Bau-und Prüfgrundsätze, Kennzeichnung und Beurteilung
vehicules - Classification, prescriptions de conception et der Konformität
d'essai, marquage et évaluation de la conformité
This amendment A1 modifies the European Standard EN 1433:2002; it was approved by CEN on 21 March 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Por
...

SLOVENSKI STANDARD
SIST EN 1433:2003/A1:2005
01-september-2005
3DGDYLQVNDNDQDOL]DFLMDQDYR]QLKSRYUãLQDKLQQDSRYUãLQDK]DSHãFH
.ODVLILNDFLMDSURMHNWLUDQMHLQ]DKWHYH]DSUHVNXãDQMHR]QDþHYDQMHLQRYUHGQRWHQMH
VNODGQRVWL
Drainage channels for vehicular and pedestrian areas - Classification, design and testing
requirements, marking and evaluation of conformity
Entwässerungsrinnen für Verkehrsflächen - Klassifizierung, Bau-und Prüfgrundsätze,
Kennzeichnung und Beurteilung der Konformität
Caniveaux hydrauliques pour l'évacuation des eaux dans les zones de circulation
utilisées par les piétons et les vehicules - Classification, prescriptions de conception et
d'essai, marquage et évaluation de la conformité
Ta slovenski standard je istoveten z: EN 1433:2002/A1:2005
ICS:
93.080.30 Cestna oprema in pomožne Road equipment and
naprave installations
SIST EN 1433:2003/A1:2005 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1433:2003/A1:2005

---------------------- Page: 2 ----------------------

SIST EN 1433:2003/A1:2005
EUROPÄISCHE NORM
EN 1433:2002/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
Juni 2005
ICS 93.080.30

Deutsche Fassung
Entwässerungsrinnen für Verkehrsflächen - Klassifizierung, Bau-
und Prüfgrundsätze, Kennzeichnung und Beurteilung der
Konformität
Drainage channels for vehicular and pedestrian areas - Caniveaux hydrauliques pour l'évacuation des eaux dans
Classification, design and testing requirements, marking les zones de circulation utilisées par les piétons et les
and evaluation of conformity vehicules - Classification, prescriptions de conception et
d'essai, marquage et évaluation de la conformité
Diese Änderung A1 modifiziert die Europäische Norm EN 1433:2002. Sie wurde vom CEN am 21.März 2005 angenommen.
Die CEN-Mitglieder sind gehalten, die CEN/CENELEC-Geschäftsordnung zu erfüllen, in der die Bedingungen festgelegt sind, unter denen
diese Änderung in der betreffenden nationalen Norm, ohne jede Änderung, einzufügen ist. Auf dem letzen Stand befindliche Listen dieser
nationalen Normen mit ihren bibliographischen Angaben sind beim Management-Zentrum oder bei jedem CEN-Mitglied auf Anfrage
erhältlich.
Diese Änderung besteht in drei offiziellen Fassungen (Deutsch, Englisch, Französisch). Eine Fassung in einer anderen Sprache, die von
einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem Management-Zentrum
mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen.
CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Dänemark, Deutschland, Estland, Finnland, Frankreich, Griechenland,
Irland, Island, Italien, Lettland, Litauen, L
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 124-1:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
EN 124-1:2015

This European Standard (EN 124-1) applies for manhole tops and gully tops with a clear opening up to and including 1 000 mm for installation within areas subjected to pedestrian and/or vehicular traffic . It applies for testing requirements, test methods, evaluation of conformity and marking of gully tops and manhole tops to support: EN 124-2 for Gully tops and manhole tops made from cast iron, EN 124-3 for Gully tops and manhole tops made from steel, aluminium alloy, EN 124-4 for Gully tops and manhole tops made from steel reinforced concrete, EN 124-5 for Gully tops and manhole tops made from composite materials, EN 124-6 for Gully tops and manhole tops made from Polypropylene (PP) or Polyvinyl-chloride (PVC-U) each of which has this part 1 as an integral part. This part 1 is not applicable in isolation but only in combination with EN 124-2 to EN 124-6. This European Standard does not apply for the gratings as part of prefabricated drainage channels according to EN 1433 and not for floor and roof gullies in buildings which are specified in EN 1253-1 and to surface boxes.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 124-3:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
EN 124-3:2015

This standard applies to gully tops and manhole tops with a clear opening up to and including 1 000 mm for installation within areas subjected to pedestrian and/or vehicular traffic. It applies for manhole tops and gully tops and gratings of classes A15 to F900 made of mild steel, stainless steel, and aluminium alloys whether in combination with concrete or not. For manhole tops and gully tops and gratings fabricated from of aluminium tread plates the application is restricted to classes A15 to C250. This part 3 is not applicable in isolation but only in combination with EN 124-1. This standard does not apply for fillings installed on site, e.g. concrete, paving blocks etc. It does not apply for the gratings as part of prefabricated drainage channels according to EN 1433 and not for floor and roof gullies in buildings which are specified in EN 1253-1 and not to surface boxes.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 124-5:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
EN 124-5:2015

This standard applies to gully tops and manhole tops with a clear opening up to and including 1 000 mm for installation within areas subjected to pedestrian and/or vehicular traffic. This standard applies for manhole tops and gully tops and gratings - classes A15 to C250 made of composite Type A and - classes A15 and B125 made of composites Type B. NOTE 1 For applications at constant temperatures exceeding 120 °C additional requirements can be necessary. Manhole tops and gully tops according to this standard are fabricated from composite materials using suitably controlled automatic processes that are moulded as a single structure and that do not contain multiple pieces bonded together. Products manufactured by means of hand lay-up methods are outside the scope of the standard. This part 5 is not applicable in isolation but only in combination with EN 124-1. This standard does not apply for fillings installed on site, eg. concrete, paving blocks etc. It does not apply for the gratings as part of prefabricated drainage channels according to EN 1433 and not for floor and roof gullies in buildings which are specified in EN 1253-1 and not for surface boxes.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 124-4:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
EN 124-4:2015

This standard applies together with the common design, performance and testing requirements according to EN 124-1 to gully tops and manhole tops with a clear opening up to and including 1 000 mm for installation within areas subjected to pedestrian and/or vehicular traffic. Together with EN 124-1 this standard applies for manhole tops and gully tops and gratings made of steel reinforced concrete. This part 4 is not applicable in isolation but only in combination with EN 124-1. It does not apply to concrete fillings of covers, gratings and frames. This standard does not apply for the gratings as part of prefabricated drainage channels according to EN 1433 and not for floor and roof gullies in buildings which are specified in EN 1253-1 and not for surface boxes.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 124-6:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
EN 124-6:2015

This standard applies to gully tops and manhole tops with a clear opening up to and including 500 mm for installation within areas subjected to pedestrian and/or vehicular traffic. It applies for manhole tops and gully tops and gratings for class A15 and class B125 made of polypropylene (PP), Polyvinyl- chloride (PVC-U) or Polyethylene (PE) ? by a moulding or extrusion process.  This standard does not apply for manhole tops and gully tops for use in applications, where specific static electricity might occur. This part 6 is not applicable in isolation but only in combination with EN 124-1. It does not apply for gratings as part of prefabricated drainage channels according to EN 1433 and not for floor and roof gullies in buildings which are specified in EN 1253-1 and not for surface boxes.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 124-2:2015(Main)
Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron
EN 124-2:2015

This European Standard (EN 124-2) applies to gully tops and manhole tops with a clear opening up to and including 1 000 mm for installation within areas subjected to pedestrian and/or vehicular traffic. This standard applies for manhole tops and gully tops and gratings of classes A15 to F900 made of flake graphite cast iron and spheroidal graphite cast iron whether in combination with concrete or not. This part 2 is not applicable in isolation but only in combination with EN 124-1. This standard does not apply for fillings installed on site, eg. concrete, paving blocks etc. It does not apply for the gratings as part of prefabricated drainage channels according to EN 1433 and does not apply for floor and roof gullies in buildings which are specified in EN 1253-1 and not to surface boxes.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1433:2003/AC:2005(Amendment)
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
EN 1433:2002/AC:2004

TC - Modification of Table A.3, footnote a plus modification of Scope and title of Figure A.3 in German version

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1433:2003(Main)
Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity
EN 1433:2002

This European Standard specifies requirements for prefabricated linear drainage channels for the collection and conveyance of surface water when installed within areas subject to pedestrian and/or vehicular traffic. It applies to grid units, slot units and kerb units up to a clear opening of 1000 mm.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    55 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17812:2022(Main)
Determination of the acoustic properties of markings - The CPX measurement method
CEN/TS 17812:2022

This document outlines a method to measure the typical external noise emission produced when tyres of passenger car roll over a structured road marking. The result is a measure for the noise perceived in the surroundings of the road, hence not for interior noise in the car.
This method can be used for three purposes:
-   determination of initial acoustic properties of a road marking, yielding a noise label for a given system;
-   testing of the acoustic conformity of a particular marking to the noise label determined during the determination of initial acoustic properties;
-   monitoring of the acoustic properties in the course of its lifetime.
The test result allows the road owner to make an assessment of the risk of nuisance when s/he considers a particular road marking system for application on a road in a noise sensitive area, e.g. built up areas. The method is also applicable to measurements on milled rumble strips.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1793-6:2018+A1:2021(Main)
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
EN 1793-6:2018+A1:2021

This document describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for traffic noise reducing devices: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed along roads, to be measured either in situ or in laboratory conditions;
-   determination of the in situ intrinsic characteristics of airborne sound insulation of noise reducing devices in actual use;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long term performance of noise reducing devices (with a repeated application of the method);
-   interactive design process of new products, including the formulation of installation manuals.
The test method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise reducing devices to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers.
Results are expressed as a function of frequency in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurement results over the whole frequency range indicated, the results will be given in a restricted frequency range and the reasons for the restriction(s) will be clearly reported.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day