SIST EN 15425:2023/oprA1:2025

SIST EN 15425:2023/oprA1:2025 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements". This standard covers: This document establishes a classification for one component polyurethane (PUR) adhesives according to their suitability for use in load-bearing timber products in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing of load-bearing timber products only. It also classifies “adhesive product lines” where all the products within the line have the same chemical composition except for a different amount of catalyst. This document only specifies the performance of adhesives for use in an environment corresponding to the defined conditions. The performance requirements of this document are applicable to the adhesives only, not to the manufactured timber products. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) or the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood and polymer impregnated wood. This document is primarily intended for use by adhesive manufacturers and for use in timber products bonded with adhesives, to assess or control the quality of adhesives. The requirements are applicable to the type testing of the adhesives. Production control activities are outside the scope of this document. Adhesives meeting the requirements of this document are adequate for use in load-bearing timber products, provided that the bonding process has been carried out according to an appropriate product standard. This document does not address the classification and use of adhesives in combination with the spraying of water before or during the bonding process; see informative Annex C of this document. This does neither allow nor forbid the use of adhesives in combination with the spraying of water.

This document establishes a classification for one component polyurethane (PUR) adhesives according to their suitability for use in load-bearing timber products in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the factory manufacture or factory-like manufacturing of load-bearing timber products only. It also classifies “adhesive product lines” where all the products within the line have the same chemical composition except for a different amount of catalyst. This document only specifies the performance of adhesives for use in an environment corresponding to the defined conditions. The performance requirements of this document are applicable to the adhesives only, not to the manufactured timber products. This document does not cover the performance of adhesives for on-site gluing (except for factory-like conditions) or the production of wood-based panels, except solid wood panels, or modified and stabilized wood with considerably reduced swelling and shrinkage properties, e.g. acetylated wood, heat treated wood and polymer impregnated wood. This document is primarily intended for use by adhesive manufacturers and for use in timber products bonded with adhesives, to assess or control the quality of adhesives. The requirements are applicable to the type testing of the adhesives. Production control activities are outside the scope of this document. Adhesives meeting the requirements of this document are adequate for use in load-bearing timber products, provided that the bonding process has been carried out according to an appropriate product standard. This document does not address the classification and use of adhesives in combination with the spraying of water before or during the bonding process; see informative Annex C of this document. This does neither allow nor forbid the use of adhesives in combination with the spraying of water.

SIST EN 15425:2023/oprA1:2025 is classified under the following ICS (International Classification for Standards) categories: 83.180 - Adhesives; 91.080.20 - Timber structures. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 15425:2023/oprA1:2025 has the following relationships with other standards: It is inter standard links to SIST EN 15425:2023. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN 15425:2023/oprA1:2025 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.