oSIST prEN 18256:2025
(Main)Digestate - Determination of the residual biogas potential
Digestate - Determination of the residual biogas potential
This document specifies a method for the determination of the residual biogas potential in digestate in an anaerobic environment.
Gärrest - Bestimmung des Restbiogaspotentials
Dieses Dokument legt ein Verfahren zur Bestimmung des Restbiogaspotentials von Gärresten in einer anaeroben Umgebung fest.
Digestat - Détermination du potentiel de production de biogaz résiduel
Le présent document spécifie une méthode pour la détermination du potentiel de production de biogaz résiduel dans le digestat en milieu anaérobie.
Digestat - Določanje potenciala bioplina, ki se še lahko sprosti iz digestata (RBP)
General Information
- Status
- Not Published
- Public Enquiry End Date
- 19-Dec-2025
- Technical Committee
- KAT - Soil quality
- Current Stage
- 4020 - Public enquire (PE) (Adopted Project)
- Start Date
- 17-Oct-2025
- Due Date
- 06-Mar-2026
- Completion Date
- 19-Dec-2025
Overview
The oSIST prEN 18256:2025:2025 standard, developed by the European Committee for Standardization (CEN), specifies a standardized method to determine the Residual Biogas Potential (RBP) in digestate within an anaerobic environment. Digestate, a byproduct of anaerobic digestion, contains organic material that may continue to generate biogas if unstable. This test is fundamental for assessing the stability of digestate, ensuring efficient biogas plant operation and reliable application of digestate as a soil improver or fertilizer.
Anaerobic digestion is a biological process breaking down organic matter in the absence of oxygen, producing biogas-a valuable renewable energy source consisting mainly of methane (CH₄) and carbon dioxide (CO₂). The oSIST prEN 18256:2025 standard provides laboratories and biogas industry professionals a scientifically based approach to quantify the remaining biogas potential of digestate, thus optimizing resource recovery and environmental safety.
Key Topics
Scope and Purpose
Defines the procedure to measure the residual biogas potential of digestate, indicating its stability and remaining energy value.Anaerobic Conditions and Temperature Control
The test is performed in sealed reaction vessels under strict anaerobic conditions with controlled temperatures, typically mesophilic (38 °C ± 2 °C) or thermophilic (52 °C ± 1 °C).Apparatus and Materials
Includes gastight reaction vessels (0.5 to 2.5 liters), pressure transducers, gas measurement devices, pH meters, balances, and specific chemical reagents such as nutrient solutions and trace elements needed for inoculum preparation.Sampling and Sample Preparation
Samples must be representative of the digestate and stored under anaerobic conditions at 3 °C ± 2 °C if not tested immediately.Procedure
The process involves mixing digestate with inoculum and nutrient solutions in specified ratios, monitoring biogas production through manometric or volumetric methods, and maintaining specific test durations (28 days).Calculations and Data Analysis
Biogas produced is standardized to temperature and pressure conditions and calculated relative to the organic matter content. Quality control involves using microcrystalline cellulose as a reference substance.Quality Requirements
Ensures pH is maintained within 7 to 8.5 during testing, background biogas production by inoculum is limited, and repeatability through duplicate testing is maintained.
Applications
Biogas Plant Management
Use of the RBP test helps operators assess the completion of the anaerobic digestion process and optimize retention times and operational parameters to maximize biogas yield.Digestate Stability Assessment
Identifying unstable digestate can prevent methane emissions from storage tanks and ensure safer application of digestate as organic fertilizer or soil conditioner.Environmental Compliance
Facilitates compliance with environmental regulations regarding biogas emissions and organic waste management by quantifying residual gas potential.Soil Improvement and Fertilizer Quality Control
Enables producers and users of digestate-based products to guarantee quality and safety by verifying the stabilization and nutrient content consistent with soil improver standards.
Related Standards
- CEN/TS 17732:2022 – Terminology for soil improvers and growing media.
- EN 12579:2024 – Sampling methods for soil improvers and growing media.
- prEN 13039:2025 – Determination of organic matter content and ash in soil improvers and growing media.
- prEN 13040-1:2025 – Sample preparation for physical and chemical tests, including dry matter, moisture, and bulk density measurement.
- EN 45501 – Metrological requirements for non-automatic weighing instruments used in test procedures.
By adhering to oSIST prEN 18256:2025:2025, stakeholders gain a reliable, repeatable method to assess digestate biogas potential, enabling better resource management and promoting sustainable energy recovery within the circular economy framework.
Frequently Asked Questions
oSIST prEN 18256:2025 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Digestate - Determination of the residual biogas potential". This standard covers: This document specifies a method for the determination of the residual biogas potential in digestate in an anaerobic environment.
This document specifies a method for the determination of the residual biogas potential in digestate in an anaerobic environment.
oSIST prEN 18256:2025 is classified under the following ICS (International Classification for Standards) categories: 65.080 - Fertilizers. The ICS classification helps identify the subject area and facilitates finding related standards.
oSIST prEN 18256:2025 is associated with the following European legislation: EU Directives/Regulations: 2003/2003, 2019/1009; Standardization Mandates: M/564, M/564 AMD 1, M/564 AMD 2, M/588, M/XXX. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
oSIST prEN 18256:2025 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2025
Digestat - Določanje potenciala bioplina, ki se še lahko sprosti iz digestata (RBP)
Digestate - Determination of the residual biogas potential
Gärrest - Bestimmung des Restbiogaspotentials
Digestat - Détermination du potentiel de production de biogaz résiduel
Ta slovenski standard je istoveten z: prEN 18256
ICS:
65.080 Gnojila Fertilizers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2025
ICS 65.080
English Version
Digestate - Determination of the residual biogas potential
Digestat - Détermination du potentiel de production de Gärrest - Bestimmung des Restbiogaspotentials
biogaz résiduel
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 223.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 18256:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 6
5 Apparatus . 6
6 Reagents . 6
7 Sampling . 7
8 Procedure . 7
8.1 Storage and preparation of sample . 7
8.2 Sampling, storage and preparation of inoculum . 8
8.3 Starting the procedure . 8
8.4 Measurement methods . 9
9 Calculation . 9
10 Test report . 11
11 Validation of the method . 11
11.1 Validation in accordance with ISO 5725-2. 11
11.2 Performance characteristics. 11
Annex A (informative) Specific information on RBP - test . 12
Annex B (informative) Performance characteristics of the method . 13
Bibliography . 15
European foreword
This document (prEN 18256:2025) has been prepared by Technical Committee CEN/TC 223 “Soil
improvers and growing media”, the secretariat of which is held by NEN.
This document is currently submitted to CEN Enquiry.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
Introduction
Anaerobic digestion is a biological process leading, in absence of oxygen, to the degradation of organic
carbon and to the production of biogas, a gas mixture composed mainly by methane (CH ) and carbon
dioxide (CO ). The degradation process is carried out by a wide range of mesophilic or thermophilic
microorganisms and applied on an industrial scale as an exploitation strategy to produce added-value
products from crops, livestock manure, agro-industrial by-products, biowaste and sludges. The digestate
obtained is a stabilized, nutrient-rich material, and a suitable component for soil improvers, growing
media and other organic fertilizers.
When the organic material is not efficiently converted into biogas, the digestate coming out from the plant
is unstable and continues to produce biogas in the final storage tank.
The assessment of the digestate’s stability can be carried out through the residual biogas potential (RBP)
test which represents the amount of biogas that could still be produced from the organic material present
at the end of the anaerobic digestion process.
1 Scope
This document specifies a method for the determination of the residual biogas potential in digestate in
an anaerobic environment.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
CEN/TS 17732:2022, Soil improvers and growing media — Terminology
EN 12579:2024, Soil improvers and growing media — Sampling
prEN 13039:2025, Soil improvers and growing media — Determination of organic matter content and ash
prEN 13040-1:2025, Soil improvers and growing media — Sample preparation — Part 1: Sample
preparation for chemical and physical tests, determination of dry matter content, moisture content and
laboratory bulk density
EN 45501, Metrological aspects of non-automatic weighing instruments
3 Terms and definitions
For the purposes of this document, he terms and definitions given in CEN/TS 17732:2022 and the
following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
3.1
biogas
mixture of gases mainly composed of CH (methane) and CO (carbon dioxide) and produced by the
4 2
anaerobic degradation of organic material
3.2
inoculum
biological material with active anaerobic microorganisms able to initiate and enhance the degradation
process
3.3
working volume
usable volume within a reaction vessel taken up by inoculum, sample, nutrients solution and water
3.4
headspace
remaining volume within the reaction vessel obtained by subtraction of the working volume, occupied by
the biogas
4 Principle
The test is carried out under anaerobic conditions and in a temperature-controlled environment. Closed
reaction vessels are filled with adjusted quantities of inoculum, sample and a nutrient solution. The
biogas is cumulated within the headspace of the reaction vessel and its amount and composition are
measured by manometric or volumetric methods. The residual biogas potential (RBP) is referred to the
standard conditions of pressure and temperature and to the amount of organic matter (volatile solids)
added to the reaction vessel.
5 Apparatus
5.1 Test facility, temperature controlled room, climate cabinet or water bath, mesophilic temperature
adjustable to 38 °C ± 2 °C.
The laboratory may carry out the analysis in thermophilic temperature 52 °C ± 1 °C.
5.2 Reaction vessels, glass or steel gastight vessels (with a volume of 0,5 l to 2,5 l).
5.3 Pressure transducer, operating range of 0 kPa to 50 kPa and a maximum uncertainty set lower
than 1,5 % of the full scale.
5.4 Volume displacement devices, liquid displacement gasometers, lubricated gas syringes and gas
counters.
5.5 Barometer, to measure atmospheric pressure.
5.6 Mixing device, shaking Table 120 rpm ± 20 rpm or magnetic stirring unit.
5.7 Balance, meeting EN 45501 class II tolerances with a scale interval of 0,01 g.
5.8 pH meter, with slope adjustment and temperature control.
5.9 Sieves, 5 mm square aperture size or smaller.
6 Reagents
6.1 Water with a specific conductivity not higher than 0,2 mS/m at 25 °C, free from the elements to be
determined.
6.2 NaOH (0,5 mol/l)
6.3 HCl (0,5 mol/l)
6.4 Trace elements stock solution
Dissolve the following masses of chemical compounds in 1000 ml water (see 6.1):
— 0,05 g of MnCl · 4H O;
2 2
— 0,005 g of H BO ;
3 3
— 0,005 g of ZnCl ;
— 0,003 g of CuCl ;
— 0,001 g of Na MoO4 · 2H O;
2 2
— 0,1 g of CoCl · 6H O;
2 2
— 0,01 g of NiCl · 6H O;
2 2
— 0,005 g of Na SeO .
2 3
6.5 Complete nutrient solution
Dissolve the following masses of chemical compounds in 1000 ml water (see 6.1):
— 0,27 g of KH PO ;
2 4
— 1,12 g of Na HPO · 2H O;
2 4 2
— 0,53 g of NH Cl;
— 0,075 g of CaCl · 2H O;
2 2
— 0,10 g of MgCl · 6H O;
2 2
— 0,02 g of FeCl · 4H O;
2 2
— 10 ml of trace elements stock solution (see 6.4).
Adjust the pH of the medium, if necessary, with dilute mineral acid or alkali to 7 ± 0,2 (see 6.2 and 6.3).
6.7 N gas
6.8 Microcrystalline cellulose (CAS 9004-34-6)
7 Sampling
Sampling is not part of the method specified in this document. Follow EN 12579:2024 dealing with soil
improvers and growing media. It is important that the laboratory receives a sample that is representative
of the product under consideration. The sample should not have been damaged or changed during
transport or storage.
8 Procedure
8.1 Storage and preparation of sample
Transportation, reception and storage of samples shall be determined according to prEN 13040-1:2025,
Clauses 6 and 7; samples preparation shall follow Clauses 9.2.1, 9.3 and 9.4. The sample shall be
characterized by the following parameters: total solids (TS) according to prEN 13040-1:2025 for dry
matter and volatile solids (VS) according to prEN 13039:2025 for organic matter. Volatile solids shall be
submitted to the preparation procedure within 24 hours after sampling. Otherwise, the sample shall be
stored (max. 1 month) at 3 °C ± 2 °C under anaerobic/anoxic condition.
+
NOTE For further characterization of the sample, the determination of pH, ammonium content (N-NH ),
volatile fatty acid profile (VFA) and the chemical oxygen demand (COD) is applicable.
8.2 Sampling, storage and preparation of inoculum
The inoculum (3.2) should come from a biogas digester working at mesophilic (or thermophilic)
condition; it shall be sieved with a maximum square aperture size of 5 mm to remove the particles
retained and then pre-digested without the addition of any nutrients and carbon sources
...










Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...