SIST EN IEC 62386-207:2018

SLOVENSKI STANDARD
SIST EN IEC 62386-207:2018
01-september-2018
1DGRPHãþD
SIST EN 62386-207:2010
Digitalni naslovljivi vmesnik za razsvetljavo - 207. del: Posebne zahteve za krmilja -
Moduli LED (naprava tipa 6) (IEC 62386-207:2018)
Digital addressable lighting interface - Part 207: Particular requirements for control gear -
LED modules (device type 6) (IEC 62386-207:2018)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 207: Besondere
Anforderungen an Betriebsgeräte - LED-Module (Gerätetyp 6) (IEC 62386-207:2018)
Interface d'éclairage adressable numérique - Partie 207: Exigences particulières pour les
appareillages de commande - Modules de DEL (dispositifs de type 6) (IEC 62386-
207:2018)
Ta slovenski standard je istoveten z: EN IEC 62386-207:2018
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN IEC 62386-207:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62386-207:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 62386-207:2018


EUROPEAN STANDARD EN IEC 62386-207

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2018
ICS 29.140.50; 29.140.99 Supersedes EN 62386-207:2009
English Version
Digital addressable lighting interface - Part 207: Particular
requirements for control gear - LED modules (device type 6)
(IEC 62386-207:2018)
Interface d'éclairage adressable numérique - Partie 207: Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences particulières pour les appareillages de 207: Besondere Anforderungen an Betriebsgeräte - LED-
commande - Modules de LED (dispositifs de type 6) Module (Gerätetyp 6)
(IEC 62386-207:2018) (IEC 62386-207:2018)
This European Standard was approved by CENELEC on 2018-05-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62386-207:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62386-207:2018
EN IEC 62386-207:2018 (E)
European foreword
The text of document 34/483/FDIS, future edition 2 of IEC 62386-207, prepared by IEC/TC 34 "Lamps
and related equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 62386-207:2018.

The following dates are fixed:
(dop) 2019-02-17
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-05-17
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62386-207:2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62386-207:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61347 (series) NOTE Harmonized as EN 61347 (series).
IEC 61347-1 NOTE Harmonized as EN 61347-1.
2

---------------------- Page: 4 ----------------------

SIST EN IEC 62386-207:2018
EN IEC 62386-207:2018 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.

NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 62386-101 2014 Digital addressable lighting interface - Part EN 62386-101 2014
101: General requirements - System
components
1 2
+ A1 -  + A1 -
IEC 62386-102 2014 Digital addressable lighting interface - Part EN 62386-102 2014
102: General requirements - Control gear
3 4
+ A1 -  + A1 -
5 6
IEC 62386-216 -  Digital addressable lighting interface – Part EN 62386-216 -
216: Particular requirements for control
gear – Load referencing (device type 15)
IEC 62386-217 2018 Digital addressable lighting interface – Part EN IEC 62386-217 2018
217: Particular requirements for control
gear – Thermal gear protection (device
type 16)
IEC 62386-218 2018 Digital addressable lighting interface – Part EN IEC 62386-218 2018
218: Particular requirements for control
gear – Dimming curve selection (device
type 17)
IEC 62386-222 2018 Digital addressable lighting interface – Part EN IEC 62386-222 2018
222: Particular requirements for control
gear – Thermal lamp protection (device
type 21)
IEC 62386-224 2018 Digital addressable lighting interface – Part EN IEC 62386-224 2018
224: Particular requirements for control
gear – Non-replaceable light source
(device type 23)



1
Under preparation. Stage at the time of publication: IEC TPUB 62386-101/AMD1:2018.
2
Under preparation. Stage at the time of publication: EN 62386-101:2014/prA1:2017.
3
Under preparation. Stage at the time of publication: IEC TFDIS 62386-102/AMD1:2018.
4
Under preparation. Stage at the time of publication: EN 62386-102:2014/prA1:2017.
5
Under preparation. Stage at the time of publication: IEC BPUB 62386-216:2018.
6
Under preparation. Stage at the time of publication: FprEN 62386-216:2018.
3

---------------------- Page: 5 ----------------------

SIST EN IEC 62386-207:2018

---------------------- Page: 6 ----------------------

SIST EN IEC 62386-207:2018




IEC 62386-207

®


Edition 2.0 2018-04




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Digital addressable lighting interface –

Part 207: Particular requirements for control gear – LED modules (device type 6)




Interface d’éclairage adressable numérique –

Partie 207: Exigences particulières pour les appareillages de commande –

Modules de LED (dispositifs de type 6)















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.140.50; 29.140.99 ISBN 978-2-8322-5500-1



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN IEC 62386-207:2018
– 2 – IEC 62386-207:2018 © IEC 2018
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 General . 9
4.1 General . 9
4.2 Version number . 9
5 Electrical specification . 9
6 Interface power supply . 9
7 Transmission protocol structure . 9
8 Timing . 9
9 Method of operation . 9
9.1 General . 9
9.2 Fast fade time . 9
9.3 Dimming curve . 10
9.3.1 General . 10
9.3.2 Dimming curve when IEC 62386-218 is implemented . 11
9.3.3 Dimming curve when IEC 62386-218 is not implemented . 11
9.4 Load deviation . 11
9.5 Thermal protection . 12
9.5.1 General . 12
9.5.2 Thermal gear protection . 12
9.5.3 Thermal lamp protection . 12
9.5.4 Behaviour of thermal protection . 12
9.6 Features information . 13
9.7 Failure status information . 13
9.8 LED module integrated . 13
10 Declaration of variables . 14
11 Definition of commands . 15
11.1 General . 15
11.2 Overview sheets . 15
11.3 Application extended commands . 17
11.3.1 General . 17
11.3.2 Configuration instructions . 17
11.3.3 Queries . 18
11.4 Special commands . 19
11.4.1 General . 19
11.4.2 ENABLE DEVICE TYPE (data) . 19
Bibliography . 20

Figure 1 – IEC 62386 graphical overview . 6

Table 1 – Fast fade times . 10

---------------------- Page: 8 ----------------------

SIST EN IEC 62386-207:2018
IEC 62386-207:2018 © IEC 2018 – 3 –
Table 2 – Control gear features . 13
Table 3 – Control gear failure status . 13
Table 4 – Control gear type . 14
Table 5 – Declaration of variables . 14
Table 6 – Application extended commands for this device type . 15

---------------------- Page: 9 ----------------------

SIST EN IEC 62386-207:2018
– 4 – IEC 62386-207:2018 © IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

DIGITAL ADDRESSABLE LIGHTING INTERFACE –

Part 207: Particular requirements for control gear –
LED modules (device type 6)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62386-207 has been prepared by IEC technical committee 34:
Lamps and related equipment.
This second edition cancels and replaces the first edition published in 2009. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) fast fade time has been redefined;
b) short circuit and open circuit have been deleted;
c) physical selection has been deleted;
d) dimming curve selection has been moved to a separate part;

---------------------- Page: 10 ----------------------

SIST EN IEC 62386-207:2018
IEC 62386-207:2018 © IEC 2018 – 5 –
e) load increase, load decrease and reference measurement have been moved to a separate
part;
f) thermal gear and lamp protection have been moved to separate parts;
g) LED module integrated has been moved to a separate part;
h) link to IEC 62386-102 error bits has been clarified;
i) the following commands have been deleted:
• ENABLE CURRENT PROTECTOR
• DISABLE CURRENT PROTECTOR
• QUERY POSSIBLE OPERATING MODES
• QUERY SHORT CIRCUIT
• QUERY OPEN CIRCUIT
• QUERY CURRENT PROTECTOR ACTIVE
• QUERY CURRENT PROTECTOR ENABLED
• QUERY OPERATING MODE
The text of this International Standard is based on the following documents:
FDIS Report on voting
34/483/FDIS 34/504/RVD

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
This Part 207 of IEC 62386 is intended to be used in conjunction with:
• Part 101, which contains general requirements for system components;
• Part 102, which contains general requirements for control gear.
A list of all parts in the IEC 62386 series, published under the general title: Digital
addressable lighting interface, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under “http://webstore.iec.ch” in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 11 ----------------------

SIST EN IEC 62386-207:2018
– 6 – IEC 62386-207:2018 © IEC 2018
INTRODUCTION
IEC 62386 contains several parts, referred to as series. The 1xx series includes the basic
specifications. Part 101 contains general requirements for system components, Part 102
extends this information with general requirements for control gear and Part 103 extends it
further with general requirements for control devices.
The 2xx parts extend the general requirements for control gear with lamp specific extensions
(mainly for backward compatibility with Edition 1 of IEC 62386) and with control gear specific
features.
The 3xx parts extend the general requirements for control devices with input device specific
extensions describing the instance types as well as some common features that can be
combined with multiple instance types.
This second edition of IEC 62386-207 is intended to be used in conjunction with IEC 62386-
101:2014, IEC 62386-101:2014/AMD1:—, IEC 62386-102:2014 and IEC 62386-
102:2014/AMD1:—, and with the various parts that make up the IEC 62386-2xx series for
control gear. The division into separately published parts provides for ease of future
amendments and revisions. Additional requirements will be added as and when a need for
them is recognized.
The setup of the standards is graphically represented in Figure 1 below.
2xx 2xx 2xx 2xx 2xx 3xx 3xx 3xx 3xx 3xx
102 General requirements - 103 General requirements -
Control gear Control devices
101 General requirements -
System components
IEC

Figure 1 – IEC 62386 graphical overview
This document, and the other parts that make up the IEC 62386-200 series, in referring to any
of the clauses of IEC 62386-1XX, specifies the extent to which such a clause is applicable;
the parts also include additional requirements, as necessary.
Where the requirements of any of the clauses of IEC 62386-1XX are referred to in this
document by the sentence “The requirements of IEC 62386-1XX, Clause “n” apply”, this
sentence is to be interpreted as meaning that all requirements of the clause in question of
Part 1XX apply, except any which are clearly inapplicable.
The standardization of the control interface for control gear is intended to achieve compatible
co-existence between electronic control gear and lighting control devices, below the level of
building management systems. This document describes a method of implementing control
gear.
All numbers used in this document are decimal numbers unless otherwise noted.

---------------------- Page: 12 ----------------------

SIST EN IEC 62386-207:2018
IEC 62386-207:2018 © IEC 2018 – 7 –
Hexadecimal numbers are given in the format 0xVV, where VV is the value. Binary numbers
are given in the format XXXXXXXXb or in the format XXXX XXXX, w here X is 0 or 1, "x" in
binary numbers means "don't care".
The following typographic expressions are used:
Variables: variableName or variableName[3:0], giving only bits 3 to 0 of variableName
Range of values: [lowest, highest]
Command: “COMMAND NAME”

---------------------- Page: 13 ----------------------

SIST EN IEC 62386-207:2018
– 8 – IEC 62386-207:2018 © IEC 2018
DIGITAL ADDRESSABLE LIGHTING INTERFACE –

Part 207: Particular requirements for control gear –
LED modules (device type 6)



1 Scope
This part of IEC 62386 specifies a bus system for control by digital signals of electronic
ligthing equipment which is in line with the requirements of IEC 61347 (all parts), with the
addition of DC supplies.
This document is only applicable to IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—
control gear associated with LED modules.
NOTE Requirements for testing individual products during production are not included.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 62386-101:2014, Digital addressable lighting interface – Part 101: General requirements
– System components
1
IEC 62386-101:2014/AMD1:—
IEC 62386-102:2014, Digital addressable lighting interface – Part 102: General requirements
– Control gear
2
IEC 62386-102:2014/AMD1:—
3
IEC 62386-216:— , Digital addressable lighting interface – Part 216: Particular requirements
for control gear – Load referencing (device type 15)
IEC 62386-217:2018, Digital addressable lighting interface – Part 217: Particular
requirements for control gear – Thermal gear protection (device type 16)
IEC 62386-218:2018, Digital addressable lighting interface – Part 218: Particular
requirements for control gear – Dimming curve selection (device type 17)
IEC 62386-222:2018, Digital addressable lighting interface – Part 222: Particular
requirements for control gear – Thermal lamp protection (device type 21)
IEC 62386-224:2018, Digital addressable lighting interface – Part 224: Particular
requirements for control gear – Non-replaceable light source (device type 23)
___________
1
Under preparation. Stage at the time of publication: IEC TPUB 62386-101/AMD1:2018.
2
Under preparation. Stage at the time of publication: IEC TFDIS 62386-102/AMD1:2018.
3
Under preparation. Stage at the time of publication: IEC BPUB 62386-216:2018.

---------------------- Page: 14 ----------------------

SIST EN IEC 62386-207:2018
IEC 62386-207:2018 © IEC 2018 – 9 –
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62386-102 apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 General
4.1 General
The requirements of IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—, Clause 4 apply,
with the restrictions, changes and additions identified below.
4.2 Version number
In 4.2 of IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—, “102” shall be replaced by
“207”, “version number” shall be replaced by “extended version number” and “versionNumber”
shall be replaced by “extendedVersionNumber”.
5 Electrical specification
The requirements of IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—, Clause 5 apply.
6 Interface power supply
The requirements of IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—, Clause 6 apply.
7 Transmission protocol structure
The requirements of IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—, Clause 7 apply.
8 Timing
The requirements of IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—, Clause 8 apply.
9 Method of operation
9.1 General
The requirements of IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—, Clause 9 apply
with the following additions.
9.2 Fast fade time
The fast fade time defined in this document is mapped to the extended fade time defined in
IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—, Clause 9.
• “fastFadeTime” shall be set upon execution of the command
“SET FAST FADE TIME (DTR0)”. “fastFadeTime” can be queried using
“QUERY FAST FADE TIME”.

---------------------- Page: 15 ----------------------

SIST EN IEC 62386-207:2018
– 10 – IEC 62386-207:2018 © IEC 2018
The minimum fast fade time a driver can achieve (“minFastFadeTime”) can be queried using
“QUERY MIN FAST FADE TIME”.
“minFastFadeTime” indicates the shortest fade time where the light output follows the selected
dimming curve.
The “fastFadeTime” shall be set to a value according to the following steps:
• if “DTR0” = 0: 0;
• else if “DTR0” ≤ “minFastFadeTime”: “minFastFadeTime”;
• else if “DTR0” > 27: 27;
• in all other cases: “DTR0”.
The fast fade time shall be used only if the fade time defined in IEC 62386-102:2014 and
IEC 62386-102:2014/AMD1:—, Clause 9 is set to 0.
If the fast fade time is used, the fade time shall be calculated on the basis of “fastFadeTime”
as follows:
• if “fastFadeTime” = 0, the fast fade is disabled and the fade time shall be calculated based
on IEC 62386-102:2014 and IEC 62386-102:2014/AMD1:—, Clause 9;
• else, the fade time is determined according to Table 1.
Table 1 – Fast fade times
Minimum Nominal fade time Maximum
“fastFadeTime” fade time fade time
ms ms ms
Fast fade disabled
0
95 100 105
1,2,3,4,5
190 200 210
6,7,8,9
10,11,12,13 285 300 315
380 400 420
14,15,16,17
475 500 525
18,19,20,21
22,23,24,25 570 600 630
26,27 665 700 735

9.3 Dimming curve
9.3.1 General
Control gear implementing this document may implement IEC 62386-218.
Depending on the application a choice needs to be made to use control gear that implements
IEC 62386-218 or not.
Implementing IEC 62386-218 offers a clearly defined behaviour whenever dimming curves are
changed. Unexpected behaviour is avoided, even when changing dimming curves during the
application.
If the application sets the dimming curve only once, before any further configuration takes
place, a simpler version as described in 9.3.3 can be applied. However, the
...