SIST EN 62386-303:2018

SLOVENSKI STANDARD
SIST EN 62386-303:2018
01-januar-2018
Digitalni naslovljivi vmesnik za razsvetljavo - 303. del: Posebne zahteve - Vhodne
naprave - Tipalo zasedenosti (IEC 62386-303:2017)
Digital addressable lighting interface - Part 303: Particular requirements - Input devices -
Occupancy sensor (IEC 62386-303:2017)
Ta slovenski standard je istoveten z: EN 62386-303:2017
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN 62386-303:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62386-303:2018

---------------------- Page: 2 ----------------------

SIST EN 62386-303:2018


EUROPEAN STANDARD EN 62386-303

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2017
ICS 29.140.50; 29.140.99

English Version
Digital addressable lighting interface -
Part 303: Particular requirements - Input devices -
Occupancy sensor
(IEC 62386-303:2017)
Interface d'éclairage adressable numérique -  Digital adressierbare Schnittstelle für die Beleuchtung -
Partie 303: Exigences particulières - Dispositifs d'entrée - Teil 303: Besondere Anforderungen - Eingabegeräte -
Capteur de présence Präsenzmelder
(IEC 62386-303:2017) (IEC 62386-303:2017)
This European Standard was approved by CENELEC on 2017-06-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62386-303:2017 E

---------------------- Page: 3 ----------------------

SIST EN 62386-303:2018
EN 62386-303:2017
European foreword
The text of document 34C/1313/FDIS, future edition 1 of IEC 62386-303, prepared by SC 34C
"Auxiliaries for lamps", of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 62386-303:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2018-03-23
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-06-23
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62386-303:2017 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61347 NOTE Harmonized in EN 61347 series.
IEC 61347-1 NOTE Harmonized as EN 61347-1.
2

---------------------- Page: 4 ----------------------

SIST EN 62386-303:2018
EN 62386-303:2017
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 62386-101 2014 Digital addressable lighting interface - EN 62386-101 2014
Part 101: General requirements -
1)
+ A1 — - -
System components
IEC 62386-103 2014 Digital addressable lighting interface - EN 62386-103 2014
Part 103: General requirements -
2)
+ A1 — - -
Control devices
3) 4)
IEC 62386-333 — Digital addressable lighting interface - EN 62386-333 —
Part 333: Particular requirements for
control devices - Manual configuration
(feature type 33)


1) Under preparation. Stage at the time of publication: IEC ACDV 62386-101/AMD1:2017.
2) Under preparation. Stage at the time of publication: IEC ACDV 62386-103/AMD1:2017.
3) Under preparation. Stage at the time of publication: IEC CCDV 62386-333:2017.
4) Under preparation. Stage at the time of publication: prEN 62386-333:2016.
3

---------------------- Page: 5 ----------------------

SIST EN 62386-303:2018

---------------------- Page: 6 ----------------------

SIST EN 62386-303:2018




IEC 62386-303

®


Edition 1.0 2017-05




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Digital addressable lighting interface –

Part 303: Particular requirements – Input devices – Occupancy sensor




Interface d'éclairage adressable numérique –

Partie 303: Exigences particulières – Dispositifs d'entrée – Capteur de présence
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 29.140.50; 29.140.99 ISBN 978-2-8322-4343-5



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62386-303:2018
– 2 – IEC 62386-303:2017 © IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 General . 9
4.1 General . 9
4.2 Version number . 9
4.3 Insulation . 9
5 Electrical specification . 9
6 Interface power supply . 9
7 Transmission protocol structure . 9
8 Timing . 10
9 Method of operation . 10
9.1 General . 10
9.2 Instance type . 10
9.3 Input signal and value . 10
9.3.1 General . 10
9.3.2 Input signal mapping for movement sensors . 10
9.3.3 Input signal mapping for presence sensors . 12
9.4 Events . 12
9.4.1 Priority use . 12
9.4.2 Bus usage . 12
9.4.3 Encoding . 13
9.4.4 Event configuration . 13
9.4.5 Event generation . 14
9.4.6 Movement trigger and catching . 14
9.5 Configuring the input device . 14
9.5.1 Using the hold timer . 14
9.5.2 Using the report timer . 15
9.5.3 Using the deadtime timer . 15
9.5.4 Setting the timers . 15
9.5.5 Manual configuration . 16
9.6 Exception handling. 16
9.6.1 Physical sensor failure . 16
9.6.2 Manufacturer specific errors . 16
9.6.3 Error value . 16
10 Declaration of variables . 17
11 Definition of commands . 18
11.1 General . 18
11.2 Overview sheets . 18
11.2.1 General . 18
11.2.2 Standard commands . 18
11.3 Event messages . 19
11.3.1 INPUT NOTIFICATION (device/instance, event) . 19
11.3.2 POWER NOTIFICATION (device) . 19

---------------------- Page: 8 ----------------------

SIST EN 62386-303:2018
IEC 62386-303:2017 © IEC 2017 – 3 –
11.4 Device control instructions . 19
11.5 Device configuration instructions . 19
11.6 Device queries . 19
11.7 Instance control instructions . 19
11.7.1 General . 19
11.7.2 CATCH MOVEMENT . 19
11.7.3 CANCEL HOLD TIMER . 19
11.8 Instance configuration instructions . 20
11.8.1 General . 20
11.8.2 SET EVENT FILTER (DTR0) . 20
11.8.3 SET HOLD TIMER (DTR0) . 20
11.8.4 SET REPORT TIMER (DTR0) . 20
11.8.5 SET DEADTIME TIMER (DTR0) . 20
11.9 Instance queries . 20
11.9.1 General . 20
11.9.2 QUERY INSTANCE ERROR . 20
11.9.3 QUERY DEADTIME TIMER . 20
11.9.4 QUERY HOLD TIMER. 20
11.9.5 QUERY REPORT TIMER . 20
11.9.6 QUERY CATCHING . 21
11.10 Special commands . 21
Bibliography . 22

Figure 1 – IEC 62386 graphical overview . 6
Figure 2 – State diagram for movement based sensor. 11
Figure 3 – State diagram for presence sensor . 12

Table 1 – Meaning of “inputValue” . 10
Table 2 – Occupancy and vacancy events . 13
Table 3 – Event filter . 14
Table 4 – Event timer setting . 15
Table 5 – “manualCapabilityInstance3xx” values . 16
Table 6 – “instanceErrorByte” values . 17
Table 7 – Declaration of device variables . 17
Table 8 – Restrictions to instance variables defined in IEC 62386-103:2014 and
IEC 62386-103:2014/AMD1:— . 17
Table 9 – Declaration of instance variables . 18
Table 10 – Standard commands . 18

---------------------- Page: 9 ----------------------

SIST EN 62386-303:2018
– 4 – IEC 62386-303:2017 © IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

DIGITAL ADDRESSABLE LIGHTING INTERFACE –

Part 303: Particular requirements – Input devices –
Occupancy sensor

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62386-303 has been prepared by subcommittee 34C: Auxiliaries
for lamps, of IEC technical committee 34: Lamps and related equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
34C/1313/FDIS 34C/1333/RVD

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
This Part 303 of IEC 62386 is intended to be used in conjunction with:

---------------------- Page: 10 ----------------------

SIST EN 62386-303:2018
IEC 62386-303:2017 © IEC 2017 – 5 –
• Part 101, which contains general requirements for system components;
• Part 103, which contains general requirements for control devices.
A list of all parts in the IEC 62386 series, published under the general title: Digital
addressable lighting interface, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 11 ----------------------

SIST EN 62386-303:2018
– 6 – IEC 62386-303:2017 © IEC 2017
INTRODUCTION
IEC 62386 contains several parts, referred to as series. The 1xx series includes the basic
specifications. Part 101 contains general requirements for system components, Part 102
extends this information with general requirements for control gear and Part 103 extends it
further with general requirements for control devices.
The 2xx parts extend the general requirements for control gear with lamp specific extensions
(mainly for backward compatibility with Edition 1 of IEC 62386) and with control gear specific
features.
The 3xx parts extend the general requirements for control devices with input device specific
extensions describing the instance types as well as some common features that can be
combined with multiple instance types.
This first edition of IEC 62386-303 is to be used in conjunction with IEC 62386-101:2014,
IEC 62386-101:2014/AMD1:—, IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:— The
division of IEC 62386 into separately published parts provides for ease of future amendments
and revisions. Additional requirements will be added as and when a need for them is
recognized.
The setup of the standards is graphically represented in Figure 1 below.
2xx 2xx 2xx 2xx 2xx 3xx 3xx 3xx 3xx 3xx
102 General requirements - 103 General requirements -
Control gear Control devices
101 General requirements -
System components
IEC

Figure 1 – IEC 62386 graphical overview
This document, and the other parts that make up the IEC 62386-300 series, in referring to any
of the clauses of IEC 62386-1XX, specifies the extent to which such a clause is applicable;
the parts also include additional requirements, as necessary.
Where the requirements of any of the clauses of IEC 62386-1XX are referred to in this
document by the sentence “The requirements of IEC 62386-1XX, Clause “n” apply”, this
sentence is to be interpreted as meaning that all requirements of the clause in question of
Part 1XX apply, except any which are clearly inapplicable.
The standardization of the control interface for control devices is intended to achieve
compatible co-existence and multi-master operation between electronic control gear and
lighting control devices, below the level of building management systems. This document
describes a method of implementing occupancy sensors.
All numbers used in this document are decimal numbers unless otherwise noted. Hexadecimal
numbers are given in the format 0xVV, where VV is the value. Binary numbers are given in

---------------------- Page: 12 ----------------------

SIST EN 62386-303:2018
IEC 62386-303:2017 © IEC 2017 – 7 –
the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1; “x” in binary numbers
means “don't care”.
The following typographic expressions are used:
Variables: “variableName” or “variableName[3:0]”, giving only bits 3 to 0 of “variableName”.
Range of values: [lowest, highest]
Command: “COMMAND NAME”

---------------------- Page: 13 ----------------------

SIST EN 62386-303:2018
– 8 – IEC 62386-303:2017 © IEC 2017
DIGITAL ADDRESSABLE LIGHTING INTERFACE –

Part 303: Particular requirements – Input devices –
Occupancy sensor



1 Scope
This part of IEC 62386 specifies a bus system for control by digital signals of electronic
lighting equipment which is in line with the requirements of IEC 61347, with the addition of DC
supplies.
This document is only applicable to IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—
input devices that deliver occupancy information to the lighting control system through
movement or presence sensing.
NOTE Requirements for testing individual products during production are not included.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 62386-101:2014, Digital addressable lighting interface – Part 101: General requirements
– System components
1
IEC 62386-101:2014/AMD1:—
IEC 62386-103:2014, Digital addressable lighting interface – Part 103: General requirements
– Control devices
2
IEC 62386-103:2014/AMD1:—
3
IEC 62386-333:— , Digital addressable lighting interface – Part 333: Particular requirements
for control devices – Manual configuration (feature type 33)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 62386-101 and
IEC 62386-103 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
_____________
1
Under preparation. Stage at the time of publication: IEC ACDV 62386-101/AMD1:2017.
2
Under preparation. Stage at the time of publication: IEC ACDV 62386-103/AMD1:2017.
3
Under preparation. Stage at the time of publication: IEC CCDV 62386-333:2017.

---------------------- Page: 14 ----------------------

SIST EN 62386-303:2018
IEC 62386-303:2017 © IEC 2017 – 9 –
3.1
instance
movement or presence input signal processing unit of an input device
[SOURCE: IEC 62386-101:2014, 3.29, modified – "movement or presence input" added]
3.2
movement sensor
instance based on movement detection only where occupancy is implied by movement and
vacancy is concluded from the absence of movement during a specified amount of time
Note 1 to entry: Movement sensing is typically done using a passive infra-red detector combined with Fresnel
optics.
3.3
presence sensor
instance based on means other than only movement detection where occupancy and vacancy
can be concluded immediately and where, in some cases, movement can also be detected
Note 1 to entry: Presence sensing may be implemented using for example camera based systems.
4 General
4.1 General
The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, Clause 4 apply,
with the restrictions, changes and additions identified below.
4.2 Version number
In 4.2 of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, “103” shall be replaced by
“303”, “version number” shall be replaced by “extended version number” and “versionNumber”
shall be replaced by "extendedVersionNumber".
4.3 Insulation
According to IEC 61347-1 it might be required that the input device has at least
supplementary insulation. This depends on the connected components. In this case special
attention should be paid with respect to the sensor(s) being used.
NOTE IEC-62386-103:2014 and IEC 62386-103:2014/AMD1:— requires system components to have at least basic
insulation.
5 Electrical specification
The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, Clause 5 apply.
6 Interface power supply
The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, Clause 6 apply.
7 Transmission protocol structure
The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, Clause 7 apply.
NOTE Subclause 9.4 provides detailed event information applicable to instances.

---------------------- Page: 15 ----------------------

SIST EN 62386-303:2018
– 10 – IEC 62386-303:2017 © IEC 2017
8 Timing
The requirements of IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—, Clause 8 apply.
9 Method of operation
9.1 Gener
...