SIST EN 13748-1:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Terrazzo tiles - Part 1: Terrazzo tiles for internal useCarreaux de mosaique de marbre - Partie 1: Carreaux de mosaique de marbre a usage intérieurTerrazzoplatten - Teil 1: Terrazzoplatten für die Verwendung im Innenbereich91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:SIST EN 13748-1:2004enTa slovenski standard je istoveten z:EN 13748-1:200401-april-2004SIST EN 13748-1:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13748-1February 2004ICS 91.100.30English versionTerrazzo tiles - Part 1: Terrazzo tiles for internal useCarreaux de mosaïque de marbre - Partie 1: Carreaux demosaïque de marbre à usage intérieurTerrazzoplatten - Teil 1: Terrazzoplatten für dieVerwendung im InnenbereichThis European Standard was approved by CEN on 4 December 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13748-1:2004: E

Clauses of this European Standard addressing the provisions of the EUConstruction Products Directive.32ZA.1Scope and relevant characteristics.32ZA.2Procedure for attestation of conformity.33ZA.2.1System of attestation of conformity.33ZA.2.2Declaration of conformity.33ZA.3CE marking and labelling.34

provided that their suitability has beenassessed according to 4.1.1.4.1.4 Mixing waterThe suitability of mixing water shall be established in accordance with 4.1.1.In general in Europe, water from the public supply is suitable.4.1.5 AdmixturesEN 934-2 applies. The suitability of admixtures shall be established in accordance with 4.1.1.4.1.6 Additions (including mineral fillers, pigments and polymers)Where applicable, fly ash shall conform to EN 450. The suitability of the other additions shall be established inaccordance with 4.1.1.4.2 Finished product requirements4.2.1 GeneralWhen tested in accordance with the methods described in clause 5, the tiles shall comply with the followingrequirements at the minimum age of 28 days or at the age declared suitable for use by the manufacturer if earlier.4.2.2 Geometrical requirements4.2.2.1 GeneralThe work dimensions of the tiles shall be specified by the manufacturer.4.2.2.2 ThicknessThickness class I (Th I): The thickness of the facing layer of the manufactured tile shall be at least 4 mm for aproduct that will not be ground after laying.

1)The “Boulonnais Marble reference is:Lunel demi-clair, thickness: 5 cm, c/passe 2 faces ground with a diamond grit size 100/120, rugotest class N7 (Ra = 1,6 mm) inaccordance with EN ISO 4288.

2)Source where information can be obtained:— Materialprüfungsamt Nordrhein-Westfalen, Marsbruchstrasse 186, D-44287 Dortmund, Germany.
...