SIST EN 60332-1-3:2005

SLOVENSKI SIST EN 60332-1-3:2005

STANDARD
marec 2005
Preskusi na električnih kablih in kablih iz optičnih vlaken v požarnih razmerah
– 1-3. del: Preskus navpičnega širjenja ognja po posamezni izolirani žici ali
kablu – Postopek za ugotavljanje gorečih kapljic/delcev
Tests on electric and optical fibre cables under fire conditions – Part 1-3: Test for
vertical flame propagation for a single insulated wire or cable – Procedure for
determination of flaming droplets/particles (IEC 60332-1-3:2004)
ICS 13.220.40; 29.060.20; 33.180.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 60332-1-3
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2004

ICS 13.220.40; 29.020; 29.060.20

English version
Tests on electric and optical fibre cables under fire conditions
Part 1-3: Test for vertical flame propagation
for a single insulated wire or cable -
Procedure for determination of flaming droplets/particles
(IEC 60332-1-3:2004)
Essais des câbles électriques  Prüfungen an Kabeln, isolierten Leitungen
et à fibres optiques soumis au feu und Glasfaserkabeln im Brandfall
Partie 1-3: Essai de propagation verticale Teil 1-3: Prüfung der vertikalen
de la flamme sur conducteur Flammenausbreitung an einer Ader,
ou câble isolé - einer isolierten Leitung oder einem Kabel -
Procédure pour la détermination Prüfverfahren zur Bewertung fallender
des particules/gouttelettes enflammées brennender Tropfen/Teile
(CEI 60332-1-3:2004) (IEC 60332-1-3:2004)

This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 60332-1-3:2004 E
Foreword
The text of document 20/698/FDIS, future edition 1 of IEC 60332-1-3, prepared by IEC TC 20, Electric
cables, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60332-1-3 on 2004-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-09-01
Annex ZA has been added by CENELEC
__________
Endorsement notice
The text of the International Standard IEC 60332-1-3:2004 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60332-1-2 NOTE Harmonized as EN 60332-1-2:2004 (not modified).
__________
- 3 - EN 60332-1-3:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2)
IEC 60332-1-1 - Tests on electric and optical fibre cables EN 60332-1-1 2004
under fire conditions
Part 1-1: Test for vertical flame
propagation for a single insulated wire or
cable – Apparatus
1)
IEC Guide 104 - The preparation of safety publications - -
and the use of basic safety publications
and group safety publications
1) 2)
ISO 187 - Paper, board and pulps EN 20187 1993
Standard atmosphere for conditioning and
testing and procedure for monitoring the
atmosphere and conditioning of samples

1)
Undated reference.
2)
Valid edition at date of issue.

NORME CEI
INTERNATIONALE
IEC
60332-1-3
INTERNATIONAL
Première édition
STANDARD
First edition
2004-07
PUBLICATION GROUPÉE DE SÉCURITÉ
GROUP SAFETY PUBLICATION
Essais des câbles électriques
et à fibres optiques soumis au feu –
Partie 1-3:
Essai de propagation verticale de la flamme
sur conducteur ou câble isolé –
Procédure pour la détermination des
particules/gouttelettes enflammées

Tests on electric and optical fibre cables
under fire conditions –
Part 1-3:
Test for vertical flame propagation
for a single insulated wire or cable –
Procedure for determination of
flaming droplets/particles
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photo-copie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
L
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60332-1-3 © IEC:2004 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references.9
3 Terms and definitions .9
4 Test apparatus.11
4.1 General.11
4.2 Ignition source.11
4.3 Filter paper.11
5 Procedure.11
5.1 Sample.11
5.2 Conditioning .11
5.3 Positioning of test piece and filter paper.11
5.4 Flame application .13
6 Evaluation of test results.13

Annex A (informative) Recommended performance requirements .19

Bibliography .

60332-1-3 © IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES
UNDER FIRE CONDITIONS –
Part 1-3: Test for vertical flame propagation for a single insulated
wire or cable – Procedure for determination of flaming droplets/particles

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible f
...