SIST EN 61995-2:2009

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dispositifs de connexion pour luminaires pour usage domestique et analogue - Partie 2: Feuilles de norme pour DCL (IEC 61995-2:2009)Dispositifs de connexion pour luminaires pour usage domestique et analogue - Partie 2: Feuilles de norme pour DCL (CEI 61995-2:2009)Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL (IEC 61995-2:2009)29.140.40SvetilaLuminaires29.120.20Spojni elementiConnecting devicesICS:Ta slovenski standard je istoveten z:EN 61995-2:2009SIST EN 61995-2:2009en,fr01-julij-2009SIST EN 61995-2:2009SLOVENSKI
STANDARD



SIST EN 61995-2:2009



EUROPEAN STANDARD EN 61995-2 NORME EUROPÉENNE
EUROPÄISCHE NORM May 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61995-2:2009 E
ICS 29.120.20; 29.140.40
English version
Devices for the connection of luminaires
for household and similar purposes -
Part 2: Standard sheets for DCL (IEC 61995-2:2009)
Dispositifs de connexion pour luminaires pour usage domestique et analogue -
Partie 2: Feuilles de norme pour DCL (CEI 61995-2:2009)
Betriebsmittel für den Anschluss von Leuchten für Haushalt
und ähnliche Zwecke -
Teil 2: Normblätter für Betriebsmittel
zum Anschluss einer Leuchte (IEC 61995-2:2009)
This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 61995-2:2009



EN 61995-2:2009
– 2 – Foreword The text of document 23B/919/FDIS, future edition 1 of IEC 61995-2, prepared by SC 23B, Plugs, socket-outlets and switches, of IEC TC 23, Electrical accessories, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61995-2 on 2009-04-01. This European Standard is to be read in conjunction with EN 61995-1. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2010-01-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2019-04-01 Annexes ZA and ZB have been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61995-2:2009 was approved by CENELEC as a European Standard without any modification. __________ SIST EN 61995-2:2009



– 3 – EN 61995-2:2009
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 61995-1
(mod) 2005 Devices for the connection of luminaires for household and similar purposes -
Part 1: General requirements EN 61995-1 2008
SIST EN 61995-2:2009



EN 61995-2:2009
– 4 – Annex ZB (normative)
Special national conditions Special national condition: National characteristic or practice that cannot be changed even over a long period, e.g. climatic conditions, electrical earthing conditions.
NOTE
If it affects harmonization, it forms part of the European Standard. For the countries in which the relevant special national conditions apply these provisions are normative, for other countries they are informative. Clause Special national condition 4 Figure 1 Finland DCL outlets shall be provided with a hook. __________
SIST EN 61995-2:2009



IEC 61995-2Edition 1.0 2009-02INTERNATIONAL STANDARD NORME INTERNATIONALEDevices for the connection of luminaires for household and similar purposes –
Part 2: Standard sheets for DCL
Dispositifs de connexion pour luminaires pour usage domestique et analogue – Partie 2: Feuilles de norme pour DCL
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE LICS 29.120.20; 29.140.40 PRICE CODECODE PRIXISBN 2-8318-1026-6
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ® SIST EN 61995-2:2009



– 2 – 61995-2 © IEC:2009 CONTENTS FOREWORD.3 1 Scope.5 2 Normative references.5 3 Requirements and tests.5 4 Standard sheets.5
Figure 1 – Example of use of a DCL socket and a DCL plug inserted in a flush type box in a ceiling.11
SIST EN 61995-2:2009



61995-2 © IEC:2009 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ______________
DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES –
Part 2: Standard sheets for DCL
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretati
...