oSIST prEN IEC 61084-2-3:2023/oprAA:2023

SLOVENSKI STANDARD
oSIST prEN IEC 61084-2-3:2023/oprAA:2023
01-februar-2023
Sistemi kabelskih korit in sistemi kabelskih cevi za električne inštalacije - 2-3. del:
Posebne zahteve - Utorski sistemi kabelskih korit za inštalacije v priključnih
omaricah - Dopolnilo AA
Cable trunking systems and cable ducting systems for electrical installations - Part 2-3:
Particular requirements - Slotted cable trunking systems intended for installation in
cabinets
Elektroinstallationskanalsysteme für elektrische Installationen - Teil 2-3: Besondere
Anforderungen an Verdrahtungskanäle zum Einbau in Schaltschränke
Systèmes de goulottes et systèmes de conduits-profilés pour installations électriques -
Partie 2-3: Exigences particulières - Systèmes de goulottes de câblage pour installation
dans les armoires
Ta slovenski standard je istoveten z: prEN IEC 61084-2-3:2022/prAA
ICS:
29.120.10 Inštalacijske cevi za Conduits for electrical
električne namene purposes
oSIST prEN IEC 61084-2- en
3:2023/oprAA:2023
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 61084-2-3:2023/oprAA:2023

---------------------- Page: 2 ----------------------
oSIST prEN IEC 61084-2-3:2023/oprAA:2023


EUROPEAN STANDARD DRAFT
prEN IEC 61084-2-3:2022
NORME EUROPÉENNE

EUROPÄISCHE NORM
prAA
December 2022
ICS 29.060.01; 29.120.10 -
English Version
Cable trunking systems and cable ducting systems for electrical
installations - Part 2-3: Particular requirements - Slotted cable
trunking systems intended for installation in cabinets
Systèmes de goulottes et systèmes de conduits-profilés Elektroinstallationskanalsysteme für elektrische
pour installations électriques - Partie 2-3: Exigences Installationen - Teil 2-3: Besondere Anforderungen an
particulières - Systèmes de goulottes de câblage pour Verdrahtungskanäle zum Einbau in Schaltschränke
installation dans les armoires
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 61084-2-3:2022; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2023-03-03.

It has been drawn up by CLC/TC 213.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 72106 Ref. No. prEN IEC 61084-2-3:2022/prAA E

---------------------- Page: 3 ----------------------
oSIST prEN IEC 61084-2-3:2023/oprAA:2023
prEN IEC 61084-2-3:2022/prAA:2022 (E)
European foreword
This document (prEN IEC 61084-2-3:2022/prAA:2022) has been prepared by CLC/TC 213 “Cable
management systems”.
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of (doa) dor + 6 months
this document has to be announced at
national level
• latest date by which this document has (dop) dor + 12 months
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) dor + 60 months
standards conflicting with this document
have to be withdrawn
This document is used in conjunction with prEN IEC 61084-1:2022 and prEN IEC 61084-1:2022/prAA:2022.
This document has been prepared under a Standardization Request given to CENELEC by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZZ, which is an integral part of this
document.
2

---------------------- Page: 4 ----------------------
oSIST prEN IEC 61084-2-3:2023/oprAA:2023
prEN IEC 61084-2-3:2022/prAA:2022 (E)
1 Modification to Clause 2, “Normative references”
Replace
“IEC 60695-11-5:2004, Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus,
confirmatory test arrangement and guidance”
by
“IEC 60695-11-5:2016, Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus,
confirmatory test arrangement and guidance”
2 Modification to Clause 10, “Mechanical properties”
In “10.2.101 General test conditions”:
replace in the sixth paragraph “class 5, Table 3” by “Table 3 - class 5”.
3 Modification to Annex B, “CTS/CDS IK code”
1
Annex B of prEN IEC 61084-1:2022 is not applicable.

1
As amended by prEN IEC 61084-1:2022/prAA:2022.
3

---------------------- Page: 5 ----------------------
oSIST prEN IEC
...