kSIST FprEN IEC 61347-2-11:2024
(Main)Controlgear for electric light sources - Safety - Part 2-11: Particular requirements - Miscellaneous electronic circuits used with luminaires
Controlgear for electric light sources - Safety - Part 2-11: Particular requirements - Miscellaneous electronic circuits used with luminaires
IEC 61347-2-11:2024 specifies safety requirements for miscellaneous electronic circuits used with luminaires for use on DC supplies up to 1 500 V or on AC supplies up to 1 000 V at 50 Hz or 60 Hz.
This second edition cancels and replaces the first edition published in 2001 and Amendment 1: 2017. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) alignment with respect to the fourth edition of IEC 61347-1:
- introduction of dated references to the fourth edition of IEC 61347-1 as appropriate;
- deletion of clauses and subclauses which are either no longer relevant or now covered in IEC 61347-1;
b) scope extension to 1 500 V for direct current;
c) scope clarification;
d) revision of information and marking requirements;
e) addition of requirements for the determination of the output working voltage (new Clause 17).
Geräte für Lampen - Teil 2-11: Besondere Anforderungen an elektronische Module für Leuchten
Appareillages pour sources de lumière électrique - Sécurité - Partie 2-11: Exigences particulières pour circuits électroniques divers utilisés avec les luminaires
L'IEC 61347-2-11:2024 spécifie des exigences de sécurité pour les circuits électroniques divers des luminaires qui sont destinés à être utilisés sur des alimentations de courant continu jusqu'à 1 500 V ou sur des alimentations de courant alternatif jusqu'à 1 000 V à 50 Hz ou 60 Hz.
Cette deuxième édition annule et remplace la première édition parue en 2001 et son Amendement 1:2017. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) alignement sur la quatrième édition de l’IEC 61347-1;
- ajout de références datées à la quatrième édition de l’IEC 61347-1 lorsque cela est approprié;
- suppression des articles et paragraphes qui soit ne sont plus pertinents soit ne sont plus couverts par la IEC 61347-1.
b) extension du domaine d'application à 1 500 V pour le courant continu;
c) clarification du domaine d'application;
d) révision des exigences d'informations et de marquage;
e) ajout d'exigences pour la détermination de la tension de service de sortie (nouvel Article 17).
Stikalne naprave za sijalke - Varnost - 2-11. del: Posebne zahteve - Različni elektronski sistemi v terminalih
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 61347-2-11:2023
01-julij-2023
Stikalne naprave za sijalke - Varnost - 2-11. del: Posebne zahteve za različne
elektronske sisteme v terminalih
Controlgear for electric light sources - Safety - Part 2-11: Particular requirements for
miscellaneous electronic circuits used with luminaires
Geräte für Lampen - Teil 2-11: Besondere Anforderungen an elektronische Module für
Leuchten
Appareillages de lampes - Partie 2-11: Prescriptions particulières pour circuits
électroniques divers utilisés avec les luminaires
Ta slovenski standard je istoveten z: prEN IEC 61347-2-11:2023
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
oSIST prEN IEC 61347-2-11:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 61347-2-11:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 61347-2-11:2023
34C/1578/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61347-2-11 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-05-19 2023-08-11
SUPERSEDES DOCUMENTS:
34C/1551/CD, 34C/1559A/CC
IEC SC 34C : AUXILIARIES FOR LAMPS
SECRETARIAT: SECRETARY:
United Kingdom Mr Petar Luzajic
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In So me Coun-
tries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final
stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Controlgear for electric light sources – Safety – Part 2-11: Particular requirements for miscella-
neous electronic circuits used with luminaires
PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
Copyright © 2023 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to down-
load this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 61347-2-11:2023
IEC CDV 61347-2-11 © IEC 2023 2 34C/1578/CDV
1 CONTENTS
2 CONTENTS . 2
3 FOREWORD. 3
4 1 Scope . 6
5 2 Normative references . 6
6 3 Definitions . 6
7 4 General requirements . 7
8 5 General notes on tests . 7
9 6 Marking . 7
10 6.1 Information and marking items . 7
11 6.1.1 Mandatory marking . 7
12 6.1.2 Information to be provided . 7
13 6.2 Durability and legibility of marking . 7
14 6.3 Built-in and integral miscellaneous circuits .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.