SIST EN 61347-2-13:2014/A1:2017
(Amendment)Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC 61347-2-13:2014/A1:2016)
Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC 61347-2-13:2014/A1:2016)
This part of IEC 61347 specifies particular safety requirements for electronic controlgear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz and at an output frequency which can deviate from the supply frequency, associated with LED modules.
Geräte für Lampen - Teil 2-13: Besondere Anforderungen an gleich- oder wechselstromversorgte elektronische Betriebsgeräte für LED-Module
Appareillages de lampes - Partie 2-13: Exigences particulières pour les appareillages électroniques alimentés en courant continu ou alternatif pour les modules de LED
Krmilne stikalne naprave za sijalke - 2-13. del: Posebne zahteve za enosmerno ali izmenično napajane elektronske krmilne stikalne naprave za module LED - Dopolnilo A1 (IEC 61347-2-13:2014/A1:2016)
General Information
- Status
- Published
- Publication Date
- 16-May-2017
- Technical Committee
- IESV - Lamps and related equipment
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 03-May-2017
- Due Date
- 08-Jul-2017
- Completion Date
- 17-May-2017
Relations
- Effective Date
- 01-Feb-2025
- Effective Date
- 31-Mar-2015
- Effective Date
- 24-Mar-2015
Overview
EN 61347-2-13:2014/A1:2017 (equivalent to IEC 61347-2-13:2014/A1:2016) defines particular safety requirements for electronic lamp controlgear intended for use with LED modules. The standard covers controlgear supplied from d.c. supplies up to 250 V and a.c. supplies up to 1 000 V (50 Hz or 60 Hz) and also covers outputs where the output frequency may deviate from the supply frequency. This Part 2-13 is intended to be used in conjunction with the latest edition of IEC 61347-1.
Key topics and requirements
- Scope and applicability: Electronic controlgear for LED modules supplied from specified d.c./a.c. voltages; applies to separate (non-integral) controlgear as well as specific marking/information requirements.
- Mandatory marking and information: Controlgear must be clearly and durably marked per IEC 61347-1 requirements and, where applicable:
- For constant-voltage types: rated output power (P_rated) and rated output voltage (U_rated).
- For constant-current types: rated output power (P_rated) and rated output current (I_rated).
- Indication if the controlgear is suitable for LED modules only.
- Maximum working/output voltage (Clause 21): Amendment introduces Clause 21 to verify the maximum output voltage (U_out) under any load condition (normal and abnormal). Test procedure highlights:
- Supply controlgear at rated supply voltage and load with LED modules at maximum declared electrical parameters.
- Modify the load (add LEDs in series/parallel or use resistors where appropriate) to find the condition that produces the highest terminal voltage. Note: no-load often yields the highest voltage in many designs.
- Measure maximum output voltage between output terminals and between terminals and earth (unless primary-secondary insulation negates the need).
- Use with IEC 61347-1: The amendment removes dated references so Part 2-13 is used alongside the latest IEC 61347-1 edition.
Applications
EN 61347-2-13 is essential for:
- Manufacturers of electronic controlgear for LED lighting (drivers, LED power supplies).
- Product safety and compliance engineers preparing technical files for CE marking.
- Test laboratories performing electrical safety and output-voltage verification (U_out) tests.
- Lighting system designers and specifiers ensuring safe compatibility between drivers and LED modules.
Related standards
- IEC 61347-1 (undated) - general requirements for lamp controlgear (to be used together with Part 2-13).
- EN 61347-2-13:2014/A1:2017 is the CENELEC-endorsed version of IEC 61347-2-13:2014/A1:2016.
Keywords: EN 61347-2-13, IEC 61347-2-13, lamp controlgear, electronic controlgear for LED modules, maximum output voltage, U_out, LED driver safety, constant-current, constant-voltage.
Frequently Asked Questions
SIST EN 61347-2-13:2014/A1:2017 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC 61347-2-13:2014/A1:2016)". This standard covers: This part of IEC 61347 specifies particular safety requirements for electronic controlgear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz and at an output frequency which can deviate from the supply frequency, associated with LED modules.
This part of IEC 61347 specifies particular safety requirements for electronic controlgear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz and at an output frequency which can deviate from the supply frequency, associated with LED modules.
SIST EN 61347-2-13:2014/A1:2017 is classified under the following ICS (International Classification for Standards) categories: 29.130.01 - Switchgear and controlgear in general; 29.140.99 - Other standards related to lamps. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 61347-2-13:2014/A1:2017 has the following relationships with other standards: It is inter standard links to SIST EN IEC 61347-2-13:2025, SIST EN 61347-2-13:2014, SIST EN 61347-2-13:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 61347-2-13:2014/A1:2017 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 2014/35/EU; Standardization Mandates: M/511. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 61347-2-13:2014/A1:2017 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2017
.UPLOQHVWLNDOQHQDSUDYH]DVLMDONHGHO 3RVHEQH]DKWHYH]DHQRVPHUQRDOL
L]PHQLþQRQDSDMDQHHOHNWURQVNHNUPLOQHVWLNDOQHQDSUDYH]DPRGXOH/('
'RSROQLOR$ ,(& $
Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic
controlgear for LED modules (IEC 61347-2-13:2014/A1:2016)
Ta slovenski standard je istoveten z: EN 61347-2-13:2014/A1:2017
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61347-2-13:2014/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2017
ICS 29.140.99
English Version
Lamp controlgear - Part 2-13: Particular requirements for d.c. or
a.c. supplied electronic controlgear for LED modules
(IEC 61347-2-13:2014/A1:2016)
Appareillages de lampes - Partie 2-13: Exigences Geräte für Lampen - Teil 2-13: Besondere Anforderungen
particulières pour les appareillages électroniques alimentés an gleich- oder wechselstromversorgte elektronische
en courant continu ou alternatif pour les modules de LED Betriebsgeräte für LED-Module
(IEC 61347-2-13:2014/A1:2016) (IEC 61347-2-13:2014/A1:2016)
This amendment A1 modifies the European Standard EN 61347-2-13:2014; it was approved by CENELEC on 2016-08-24. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61347-2-13:2014/A1:2017 E
European foreword
The text of document 34C/1199/FDIS, future IEC 61347-2-13:2014/A1, prepared by SC 34C
"Auxiliaries for lamps", of IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 61347-2-13:2014/A1:2017.
The following dates are fixed:
(dop) 2017-10-28
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2020-04-28
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61347-2-13:2014/A1:2016 was approved by CENELEC as
a European Standard without any modification.
IEC 61347-2-13 ®
Edition 2.0 2016-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Lamp controlgear –
Part 2-13: Particular requirements for d.c. or a.c. supplied electron
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...