SIST EN IEC 62631-3-11:2018

SLOVENSKI STANDARD
SIST EN IEC 62631-3-11:2018
01-maj-2018
'LHOHNWULþQHLQXSRURYQHODVWQRVWLWUGQLKL]RODFLMVNLKPDWHULDORYGHO
8JRWDYOMDQMHXSRURYQLKODVWQRVWLPHWRGH]HQRVPHUQLPWRNRP3UHKRGQD
XSRUQRVWLQVSHFLILþQDSUHKRGQDXSRUQRVW0HWRGD]DLPSUHJQDFLMVNHLQSUHNULYQH
VQRYL,(&
Dielectric and resistive properties of solid insulating materials - Part 3-11: Determination
of resistive properties (DC Methods) - Volume resistance and volume resistivity, method
for impregnation and coating materials (IEC 62631-3-11:2018)
Propriétés diélectriques et résistives des matériaux isolants solides - Partie 3-11:
Détermination des propriétés résistives (méthodes en courant continu) - Résistance
transversale et résistivité transversale, méthode pour les matériaux d'imprégnation et de
revêtement (IEC 62631-3-11:2018)
Ta slovenski standard je istoveten z: EN IEC 62631-3-11:2018
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
SIST EN IEC 62631-3-11:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62631-3-11:2018

---------------------- Page: 2 ----------------------

SIST EN IEC 62631-3-11:2018


EUROPEAN STANDARD EN IEC 62631-3-11

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2018
ICS 17.220.99; 29.035.01

English Version
Dielectric and resistive properties of solid insulating materials -
Part 3-11: Determination of resistive properties (DC methods) -
Volume resistance and volume resistivity - Method for
impregnation and coating materials
(IEC 62631-3-11:2018)
Propriétés diélectriques et résistives des matériaux isolants Dielektrische und resistive Eigenschaften fester Isolierstoffe
solides - Partie 3-11: Détermination des propriétés - Teil 3-11: Bestimmung resistiver Eigenschaften
résistives (méthodes en courant continu) - Résistance (Gleichspannungsverfahren) - Durchgangswiderstand und
volumique et résistivité volumique - Méthode pour spezifischer Durchgangswiderstand - Verfahren für Tränk-
matériaux d'imprégnation et de revêtement und Beschichtungsstoffe
(IEC 62631-3-11:2018) (IEC 62631-3-11:2018)
This European Standard was approved by CENELEC on 2018-02-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62631-3-11:2018 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62631-3-11:2018
EN IEC 62631-3-11:2018 (E)

European foreword
The text of document 112/409/FDIS, future edition 1 of IEC 62631-3-11, prepared by IEC/TC 112
"Evaluation and qualification of electrical insulating materials and systems" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62631-3-11:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-11-14
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-02-14
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62631-3-11:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60455-3-5 NOTE Harmonized as EN 60455-3-5.
IEC 60464-3-1 NOTE Harmonized as EN 60464-3-1.
IEC 60464-3-2 NOTE Harmonized as EN 60464-3-2.

2

---------------------- Page: 4 ----------------------

SIST EN IEC 62631-3-11:2018
EN IEC 62631-3-11:2018 (E)

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.

NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 62631-3-1 -  Dielectric and resistive properties of solid EN 62631-3-1 -
insulating materials - Part 3-1
Determination of resistive properties (DC
methods) - Volume resistance and volume
resistivity, general method
ISO 1514 -  EN ISO 1514 -
ISO 2808 -  Paints and varnishes_- Determination of EN ISO 2808 -
film thickness


3

---------------------- Page: 5 ----------------------

SIST EN IEC 62631-3-11:2018

---------------------- Page: 6 ----------------------

SIST EN IEC 62631-3-11:2018



IEC 62631-3-11

®


Edition 1.0 2018-01




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Dielectric and resistive properties of solid insulating materials –

Part 3-11: Determination of resistive properties (DC methods) – Volume

resistance and volume resistivity – Method for impregnation and coating


materials



Propriétés diélectriques et résistives des matériaux isolants solides –


Partie 3-11: Détermination des propriétés résistives (méthodes en courant

continu) – Résistance volumique et résistivité volumique – Méthode pour

matériaux d'imprégnation et de revêtement










INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 17.220.99; 29.035.01 ISBN 978-2-8322-5184-3



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN IEC 62631-3-11:2018
– 2 – IEC 62631-3-11:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Significance . 7
5 Method of test . 7
5.1 General . 7
5.2 Power supply (voltage) . 7
5.3 Equipment . 8
5.3.1 Accuracy . 8
5.3.2 Guarding . 8
5.3.3 Electrodes . 8
5.3.4 Calibration . 8
5.3.5 Test specimen . 8
5.4 Procedure for volume resistivity as function of temperature . 9
5.4.1 General . 9
5.4.2 Equipment . 9
5.4.3 Test set-up . 9
5.4.4 Procedure . 9
5.4.5 Calculation . 9
5.5 Procedure for volume resistivity after seven days of immersion in water . 10
5.5.1 General . 10
5.5.2 Equipment . 10
5.5.3 Test set-up . 10
5.5.4 Procedure . 10
5.5.5 Calculation . 10
6 Report . 10
7 Repeatability and reproducibility . 11
Bibliography . 12

---------------------- Page: 8 ----------------------

SIST EN IEC 62631-3-11:2018
IEC 62631-3-11:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

DIELECTRIC AND RESISTIVE PROPERTIES
OF SOLID INSULATING MATERIALS –

Part 3-11: Determination of resistive properties (DC methods) –
Volume resistance and volume resistivity – Method for
impregnation and coating materials

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates
closely with the International Organization for Standardization (ISO) in accordance with conditions determined
by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62631-3-11 has been prepared by IEC technical committee 112:
Evaluation and qualification of electrical insulating materials and systems.
The text of this standard is based on the following documents:
FDIS Report on voting
112/409/FDIS 112/415/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
A list of all parts in the IEC 62631 series, published under the general title Dielectric and
resistive properties of solid insulating materials, can be found on the IEC websi
...