SIST EN 22244:1996

SLOVENSKI STANDARD
SIST EN 22244:1996
01-avgust-1996
1DGRPHãþD
SIST ISO 2244:1996
Embalaža - Celovita, napolnjena transportna embalaža - Preskus z vodoravnim
udarcem na vodoravni ali nagnjeni ravnini - Preskus z nihalom (ISO 2244:1985)
Packaging - Complete, filled transport packages - Horizontal impact tests (horizontal or
inclined plane test - Pendulum test) (ISO 2244:1985)
Verpackung - Versandfertige Packstücke - Horizontale Stoßprüfung (waagrechte oder
schiefe Ebene - Pendel) (ISO 2244:1985)
Emballages - Emballages d'expédition complets et pleins - Essais de choc horizontal
(essai sur plan horizontal ou incliné - Essai au pendule) (ISO 2244:1985)
Ta slovenski standard je istoveten z: EN 22244:1992
ICS:
55.180.40 Celovita, napolnjena Complete, filled transport
transportna embalaža packages
SIST EN 22244:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 22244:1996

---------------------- Page: 2 ----------------------

SIST EN 22244:1996

---------------------- Page: 3 ----------------------

SIST EN 22244:1996

---------------------- Page: 4 ----------------------

SIST EN 22244:1996
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MElK~Yt1APO~HAR OPrAHM3ALWlR f-l0 CTAHAAPTM3AL(MM~ORGANISATION INTERNATIONALE DE NORMALISATION
Packaging - Complete, filled transport packages -
Horizontal impact tests (horizontal or inclined plane test;
pendulum test)
Essais de choc horizontal fessai sur plan horizontal ou inclinh; essai
Emballages - Emballages d’expedition complets et pleins -
au pendulel
Second edition - 1985-11-01
Ref. No. ISO 22444985 (E)
U DC 621.798.1 : 620.165.7
Descriptors : packing, transport packing, complete-and filled packages, tests, impact tests.
Price based on 3 pages

---------------------- Page: 5 ----------------------

SIST EN 22244:1996
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards bodies (ISO member bodies). The work of preparing International
Standards is normally carried out through ISO technical committees. Esch member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take patt in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council. They are approved in accordance with ISO procedures requiring at
least 75 % approval by the member bodies voting.
International Standard ISO 2244 was prepared by Technical Committee ISO/TC 122,
Packaging.
. This second edition cancels replaces the first
ISO 2244 was first published in 1972
edition, which has been technically revised as follows :
-
a horizontal plane test method has been specified;
-
a new clause on “Package preparation” has been added.
Users should note that all International Standards undergo revision from time to time
and that any reference made herein to any other International Standard implies its
latest edition, unless othetwise stated.
0 International Organkation for Standardkation, 1995
Printed in Switzerland

---------------------- Page: 6 ----------------------

SIST EN 22244:1996
ISO 2244-1985 (E)
INTERNATIONAL STANDARD
Packaging - Complete, filled transport packages -
Horizontal impact tests (horizontal or inclined plane test;
pendulum test)
The impact surface shall be sufficiently rigid not to deflect more
1 Scope and field of application
than 0,25 mm when a load of 160 kg/cm* is applied anywhere
on the surface.
This International Standard specifies methods of horizontal im-
patt testing (horizontal or inclined plane test and pendulum
In addition, the apparatus shall meet the requirements and
test) on a complete, filled transport package. The test may be
tolerantes specified in clause 7.
performed either as a Single test to investigate the effects of
horizontal impact or as part of a sequence of tests designed to
distribution
measure the ability of a package to withstand a
4.2 Optional interposed hazards, to be used when it is re-
System that includes a horizontal impact hazard.
quired to concentrate the impact in a particular area of the test
package.
2 References
The dimensions, material and location of the interposed hazard
shall be carefully specified.
ISO 2206, Packaging - Complete, filled transport packages -
Example: A steel beam with a length of 200 mm and a cross-
ldentification of Parts when testing.
section of 100 ( + 1) mm x 100 ( * 1) mm with rounded edges of
ISO 2233, Packaging - Complete, filled transport packages - radius 5 + 0,l mm, placed centrally in the impact sutface (4.1).
Conditioning for testing.
4.3 Impact testing apparatus: Types of apparatus that
may be used are described in 4.3.1, 4.3.2 and 4.3.3.
3 Principle
4.3.1 Inclined plane tester, consisting of the following items:
Applying a horizontal velocity to the test package and bringing
it to a halt by impact with a vertical impact surface. The at-
mospheric conditions, the horizontal velocity and the attitude
Two-rail steel track, inclined at 10° to the horizon-
4.3.1.1
of the package are predetermined. Particular conditions of im-
tal. The distance along the incline shall be graduated at inter-
patt may be simulated by placing appropriately profiled inserts
vals of 50 mm. (See figure 1.)
between the impact surface and the impacting face or edge of
the test package.
4.3.1.2 Rolling carriage or dolly: The surface friction be-
tween the rolling carriage/dolly and the test package shall be
such that during movement from rest to impact the package
4 Apparatus
will not move in relation to the carriage, but such that upon im-
patt the package will move freely.
4.1 Impact surface, which should be either
4.3.1.3 Impact surface (or bumper), meeting the specifi-
a) a plane inclined to the vertical at 10 + l” (for the in-
cations of 4.1, placed at the bottom of the track with its face
clined plane test), or
perpendicular to the direction of movement of the carriage
b) a plane vettical to within l” (for the horizontal or
down the track.
pendulum test).
NOTES
The
...