SIST EN 62047-22:2014

SLOVENSKI STANDARD
SIST EN 62047-22:2014
01-november-2014
Polprevodniški elementi - Mikroelektromehanski elementi - 22. del: Metoda
elektromehanskega nateznega preskušanja prevodnih tankih plasti na upogljivih
podlagah (IEC 62047-22:2014)
Semiconductor devices - Micro-electromechanical devices - Part 22: Electromechanical
tensile test method for conductive thin films on flexible substrates
/
Dispositifs a semiconducteurs - Dispositifs microélectromécaniques - Partie 22: Méthode
d'essai de traction électromécanique pour les couches minces conductrices sur des
substrats souples
Ta slovenski standard je istoveten z: EN 62047-22:2014
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN 62047-22:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62047-22:2014

---------------------- Page: 2 ----------------------

SIST EN 62047-22:2014


EUROPEAN STANDARD EN 62047-22

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2014
ICS 01.080.99

English Version
Semiconductor devices - Micro-electromechanical devices -
Part 22: Electromechanical tensile test method for conductive
thin films on flexible substrates
(IEC 62047-22:2014)
Dispositifs à semiconducteurs - Dispositifs Halbleiterbauelemente - Bauelemente der
microélectromécaniques - Mikrosystemtechnik -
Partie 22: Méthode d'essai de traction électromécanique Teil 22: Elektromechanisches Zug-Prüfverfahren für
pour les couches minces conductrices sur des substrats leitfähige Dünnschichten auf flexiblen Substraten
souples (IEC 62047-22:2014)
(CEI 62047-22:2014)
This European Standard was approved by CENELEC on 2014-07-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62047-22:2014 E

---------------------- Page: 3 ----------------------

SIST EN 62047-22:2014
EN 62047-22:2014 - 2 -
Foreword
The text of document 47F/186/FDIS, future edition 1 of IEC 62047-22, prepared by SC 47F
“Microelectromechanical systems” of IEC/TC 47 “Semiconductor devices" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62047-22:2014.

The following dates are fixed:
(dop) 2015-04-24
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-07-24
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62047-22:2014 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 62047-22:2014
- 3 - EN 62047-22:2014
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year

IEC 62047-2 2006 Semiconductor devices - Micro- EN 62047-2 2006
electromechanical devices -
Part 2: Tensile testing method
of thin film materials
IEC 62047-3 2006 Semiconductor devices - Micro- EN 62047-3 2006
electromechanical devices -
Part 3: Thin film standard test piece
for tensile testing
IEC 62047-8 2011 Semiconductor devices - Micro- EN 62047-8 2011
electromechanical devices -
Part 8: Strip bending test method
for tensile property measurement
of thin films
ISO 527-3 1995 Plastics - Determination of tensile EN ISO 527-3 1995
properties -
Part-3: Test conditions for films
and sheets

---------------------- Page: 5 ----------------------

SIST EN 62047-22:2014

---------------------- Page: 6 ----------------------

SIST EN 62047-22:2014




IEC 62047-22

®


Edition 1.0 2014-06




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Semiconductor devices – Micro-electromechanical devices –

Part 22: Electromechanical tensile test method for conductive thin films on

flexible substrates




Dispositifs à semiconducteurs – Dispositifs microélectromécaniques –

Partie 22: Méthode d'essai de traction électromécanique pour les couches


minces conductrices sur des substrats souples













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX K


ICS 31.080.99 ISBN 978-2-8322-1649-1



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62047-22:2014
– 2 – IEC 62047-22:2014 © IEC 2014
CONTENTS

FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and designations . 5
3.1 Terms and definitions. 5
3.2 Symbols and designations . 6
4 Test piece . 6
4.1 General . 6
4.2 Shape of a test piece . 6
4.3 Measurement of dimensions . 7
5 Testing method and test apparatus . 7
5.1 Test principle . 7
5.2 Test machine . 7
5.3 Test procedure. 9
5.4 Test environment . 9
6 Test report . 9

Figure 1 – Bilayered test piece. 6
Figure 2 – Schematic of an electromechanical test machine . 8
Figure 3 – Electromechanical tensile grip . 9

Table 1 – Symbols and designations of a test piece . 6

---------------------- Page: 8 ----------------------

SIST EN 62047-22:2014
IEC 62047-22:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SEMICONDUCTOR DEVICES –
MICRO-ELECTROMECHANICAL DEVICES –

Part 22: Electromechanical tensile test method
for conductive thin films on flexible substrates

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC Natio
...