kSIST FprEN 15077:2025
(Main)Chemicals used for treatment of swimming pool water - Sodium hypochlorite
Chemicals used for treatment of swimming pool water - Sodium hypochlorite
This document is applicable to sodium hypochlorite used directly or for the production of formulations for treating swimming pool and spas water. It describes the characteristics of sodium hypochlorite and specifies the requirements and the corresponding test methods for sodium hypochlorite. It gives information on its use for treating swimming pool and spas water.
Produkte zur Aufbereitung von Schwimm- und Badebeckenwasser - Natriumhypochlorit
Dieses Dokument gilt für Natriumhypochlorit, das direkt zur Aufbereitung von Schwimm- und Badebeckenwasser oder zum Herstellen von Zubereitungen für diesen Zweck verwendet wird. Es beschreibt die Eigenschaften von Natriumhypochlorit und legt die Anforderungen sowie die entsprechenden Prüfverfahren für Natriumhypochlorit fest. Es enthält Angaben zu dessen Anwendung bei der Aufbereitung von Schwimm- und Badebeckenwasser.
Produits chimiques utilisés pour le traitement de l’eau des piscines - Hypochlorite de sodium
Le présent document est applicable à l’hypochlorite de sodium utilisé directement ou pour préparer des formulations pour traiter l’eau des piscines. Il décrit les caractéristiques de l’hypochlorite de sodium et spécifie les exigences et les méthodes d’essais correspondantes applicables à l’hypochlorite de sodium. Il informe également sur son utilisation dans le cas du traitement de l’eau des piscines.
Kemikalije, ki se uporabljajo za pripravo bazenske vode - Natrijev hipoklorit
General Information
- Status
- Not Published
- Public Enquiry End Date
- 30-Jul-2024
- Technical Committee
- IOVO - Water supply and waste water engineering
- Current Stage
- 5020 - Formal vote (FV) (Adopted Project)
- Start Date
- 07-Nov-2025
- Due Date
- 26-Dec-2025
- Completion Date
- 10-Nov-2025
Relations
- Revises
SIST EN 15077:2013 - Chemicals used for treatment of swimming pool water - Sodium hypochlorite - Effective Date
- 07-Feb-2024
Overview
prEN 15077 (FprEN 15077) is a CEN draft European standard that specifies the characteristics, purity criteria, test methods and handling information for sodium hypochlorite used directly or for producing formulations to treat swimming pool and spa water. It updates and will supersede EN 15077:2013 and aligns labelling, transportation and storage guidance with current safety and classification rules. The standard applies to aqueous sodium hypochlorite solutions with active (available) chlorine up to about 18% by mass.
Key topics and technical requirements
- Product description and identification: chemical names (NaClO), CAS (7681-52-9), common names (liquid bleach), physical and chemical properties (clear yellow‑green solution, pH > 11, density 1.13–1.30 g/ml at 20 °C).
- Concentration and composition: supplied solutions up to 18% active chlorine; common concentrated products ≥12% active chlorine. Manufacturer’s declared concentration must be met or exceeded at delivery.
- Purity and impurities: limits for trace metals and by-products expressed per mg/kg of available chlorine (examples: arsenic, lead, cadmium, chromium, mercury, nickel, selenium) and limits on by-products such as sodium chlorate (not to exceed 5.4% mass fraction of available chlorine) and sodium bromate.
- Test methods: sampling and analysis referenced to EN 901.
- Labelling and hazard communication: GHS hazard statements for products ≥5% active chlorine (H314, H400, EUH031) and requirement for precautionary statements and extended SDS.
- Transportation and marking: UN 1791; ADR/RID Class 8, packing group II; users must be aware of incompatibilities during transport; means of delivery must be clearly marked (name/type displayed at viewing height).
- Storage and stability: protect from light and heat, store cool in appropriate containers (PE, PVC-GFR or rubber-lined/ plastic-coated steel); decomposition reduces active chlorine (example: ~1 g/L per day at 20 °C) and increases chlorates.
Practical applications and users
- Intended for manufacturers, formulators, pool operators, water treatment suppliers, transporters and regulatory bodies dealing with chemicals for pool and spa water treatment.
- Helps ensure product quality, safe handling, compliant labelling/transport, and consistent dosing for effective disinfection.
- Useful for procurement specifications, safety data sheets, quality control labs and compliance checks.
Related standards and references
- Normative reference: EN 901 (sampling and analysis for sodium hypochlorite).
- Mentions EU biocidal regulation (Regulation (EU) No 528/2012) and classification criteria (Regulation (EC) No 1272/2008).
- Supersedes EN 15077:2013 when adopted.
Keywords: sodium hypochlorite, swimming pool water treatment, pool chemicals, EN 15077, CEN, sodium chlorate, active chlorine, storage and labelling.
Frequently Asked Questions
kSIST FprEN 15077:2025 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Chemicals used for treatment of swimming pool water - Sodium hypochlorite". This standard covers: This document is applicable to sodium hypochlorite used directly or for the production of formulations for treating swimming pool and spas water. It describes the characteristics of sodium hypochlorite and specifies the requirements and the corresponding test methods for sodium hypochlorite. It gives information on its use for treating swimming pool and spas water.
This document is applicable to sodium hypochlorite used directly or for the production of formulations for treating swimming pool and spas water. It describes the characteristics of sodium hypochlorite and specifies the requirements and the corresponding test methods for sodium hypochlorite. It gives information on its use for treating swimming pool and spas water.
kSIST FprEN 15077:2025 is classified under the following ICS (International Classification for Standards) categories: 13.060.25 - Water for industrial use; 71.100.80 - Chemicals for purification of water. The ICS classification helps identify the subject area and facilitates finding related standards.
kSIST FprEN 15077:2025 has the following relationships with other standards: It is inter standard links to SIST EN 15077:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase kSIST FprEN 15077:2025 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 15077:2024
01-julij-2024
Kemikalije, ki se uporabljajo za pripravo bazenske vode - Natrijev hipoklorit
Chemicals used for treatment of swimming pool water - Sodium hypochlorite
Produkte zur Aufbereitung von Schwimm- und Badebeckenwasser - Natriumhypochlorit
Produits chimiques utilisés pour le traitement de l’eau des piscines - Hypochlorite de
sodium
Ta slovenski standard je istoveten z: prEN 15077
ICS:
13.060.25 Voda za industrijsko uporabo Water for industrial use
71.100.80 Kemikalije za čiščenje vode Chemicals for purification of
water
oSIST prEN 15077:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 15077:2024
oSIST prEN 15077:2024
DRAFT
EUROPEAN STANDARD
prEN 15077
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2024
ICS 71.100.80 Will supersede EN 15077:2013
English Version
Chemicals used for treatment of swimming pool water -
Sodium hypochlorite
Produits chimiques utilisés pour le traitement de l'eau Produkte zur Aufbereitung von Schwimm- und
des piscines - Hypochlorite de sodium Badebeckenwasser - Natriumhypochlorit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 164.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15077:2024 E
worldwide for CEN national Members.
oSIST prEN 15077:2024
prEN 15077:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Description . 5
4.1 Identification . 5
4.2 Commercial form . 6
4.3 Physical properties . 6
4.4 Chemical properties . 7
5 Purity criteria . 7
5.1 General. 7
5.2 Composition of commercial product . 7
5.3 Impurities and main by-products . 7
5.4 Chemical parameters. 8
6 Test methods . 8
7 Labelling – Transportation - Storage . 8
7.1 Means of delivery . 8
7.2 Labelling . 9
7.3 Transportation regulations and labelling . 10
7.4 Marking . 10
7.5 Storage . 10
Annex A (informative) General information on sodium hypochlorite . 11
Annex B (normative) General rules relating to safety . 12
Bibliography . 13
oSIST prEN 15077:2024
prEN 15077:2024 (E)
European foreword
This document (prEN 15077:2024) has been prepared by Technical Committee CEN/TC 164 “Water
supply”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 15077:2013.
prEN 15077:2024 includes the following significant technical changes with respect to EN 15077:2013:
a) modification of 7.3 on transportation regulations and labelling, adding the sentence “The user shall
be aware of the incompatibilities between transported products.”;
b) modification of 7.4 on marking, adding the note “at least the name and type of the product shall be
clearly marked or displayed at viewing height on the means of delivery”.
oSIST prEN 15077:2024
prEN 15077:2024 (E)
Introduction
In respect of potential adverse effects on the quality of water intended for human consumption caused
by the product covered by this document:
a) this document provides no information as to whether the product may be used without restriction in
any of the Member States of the EU or EFTA;
b) while awaiting the adoption of verifiable European criteria, existing national regulations concerning
the use and/or the characteristics of this product remain in force.
NOTE 1 Conformity with this document does not confer or imply acceptance or approval of the product in any of
the Member States of the EU or EFTA. Local regulations and requirements can apply.
NOTE 2 This product is a biocide. At the time of publication, the EU legislation in force regarding biocides is
Regulation (EU) No 528 /2012 [1].
oSIST prEN 15077:2024
prEN 15077:2024 (E)
1 Scope
This document is applicable to sodium hypochlorite used directly or for the production of formulations
for treating swimming pool water. It describes the characteristics of sodium hypochlorite and specifies
the requirements and the corresponding test methods for sodium hypochlorite. It gives information on
its use for treating swimming pool water.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 901, Chemicals used for treatment of water intended for human consumption — Sodium hypochlorite
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
• ISO Online browsing platform: available at https://www.iso.org/obp/ui
• IEC Electropedia: available at https://www.electropedia.org/
4 Description
4.1 Identification
4.1.1 Chemical name
Sodium hypochlorite.
4.1.2 Synonym or commons name
Liquid bleach, soda bleach, bleach lye.
4.1.3 Relative molecular mass
74,44.
4.1.4 Empirical formula
NaClO.
4.1.5 Chemical formula
NaClO.
® 1
4.1.6 CAS-Registry Number
7681-52-9.
1 ®
The Chemical Abstracts Service Registry Number is a trademark of the American Chemical Society. This
information is given for the convenience of users of this document and does not constitute an endorsement of the
product named.
oSIST prEN 15077:2024
prEN 15077:2024 (E)
4.1.7 EINECS reference
231-668-3.
4.2 Commercial form
The product is supplied as an aqueous solution with an available (active) chlorine concentration up to a
mass fraction of 18 %. For safe handling and use and emergency procedures of sodium hypochlorite, refer
to Annex B.
4.3 Physical properties
4.3.1 Appearance and odour
The product is a clear yellowish-green solution with a faint chlorinous odour.
4.3.2 Density
The density of the product varies between 1,13 g/ml and 1,30 g/ml at 20 °C.
4.3.3 Solubility in water
The product is capable of being mixed with water in any proportion.
4.3.4 Vapour pressure
Approximately 2,5 kPa at 20 °C.
4.3.5 Boiling point at 100 kPa
Not applicable.
NOTE 100 kPa = 1 bar.
4.3.6 Crystallization and freezing point
At approximately −10 °C, crystallization of NaOCl.6H O starts.
Freezing of the concentrated product takes pla
...










Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...