SIST EN 22247:1996

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackung - Versandfertige Packstücke - Schwingprüfung mit niedriger Festfrequenz (ISO 2247:1985)Emballages - Emballages d'expédition complets et pleins - Essai de vibration a basse fréquence fixe (ISO 2247:1985)Packaging - Complete, filled transport packages - Vibration test at fixed flow frequency (ISO 2247:1985)55.180.40Celovita, napolnjena transportna embalažaComplete, filled transport packagesICS:Ta slovenski standard je istoveten z:EN 22247:1992SIST EN 22247:1996en01-avgust-1996SIST EN 22247:1996SLOVENSKI
STANDARDSIST ISO 2247:19961DGRPHãþD



SIST EN 22247:1996



SIST EN 22247:1996



SIST EN 22247:1996



w - International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX~YHAPOP(HAR OPrAHM3AWlR I-IO CTAH~APTM3AL&lM.ORGANISATlON INTERNATIONALE DE NORMALISATION Packaging - Complete, filled transport packages - Vibration test at fixed low frequency Emballages - Emballages d’exphdition com,olets et pleins - Essai de Vibration 2 basse frhyuence fixe Second edition - 1985-12-15 UDC 621.798.1 : 620.178.5 Descriptors : packing, transport packing, complete-and filled packages, tests, Vibration tests. Ref. No. ISO 2247-1985 (E) Price based on 2 pages SIST EN 22247:1996



Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take patt in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 2247 was prepared by Technical Committee ISO/TC 122, Packaging. This second edition cancels and replaces the first edition (ISO 2247-19721, which has been technically revised as follows: - the specification of the “Apparatus”); Vibration been modif ied (clause 4 - a new clause on “Package preparation” has been added; - the values for the Vibration frequency and resultant peak acceleration have been modified (clause 7 “Procedure”). Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated. 0 International Organkation for Standardkation, 1985 Printed in Switzerland SIST EN 22247:1996



INTERNATIONAL STANDARD ISO 2247-1985 (E) Packaging - Complete, filled transport packages - Vibration test at fixed low frequency 1 Scope and field of application This International Standard specifies a method for carrying out a Vibration test on a complete, filled transport package. This test may be used to assess the Performance of a package in terms of its strength or the protection that it offers to its con- tent when it is subjected to Vibration. lt may be performed either as a Single test to investigate the effects of Vibration or as part of a sequence of tests designed to measure the ability of a package to withstand a distribution System that includes a Vibration hazard. NOTE - Other methods of Vibration testing of packages are being examined and will be considered for inclusion in this International Stan- dard at a later date. There are methods in use which reproduce the vibrating environment, but it would be desirable to have a method more closely representative of the environment, and if such a method were developed it would be scientifically preferable to the present procedure. 2 References ISO 2206, Packaging - Complete, filfed transport packages - ldentification of parts when testing. ISO 2233, Packaging - Complete, filled transport packages - Conditioning for testing. ISO 2234, Packaging - Comple te, filled transport packages - S tacking tes ts using sta tic load. 3 Principle Placing of the test package on a Vibration table and Vibration of the package. The atmospheric
...