SIST IEC 60121:1999
(Main)Recommendation for commercial annealed aluminium electrical conductor wire
Recommendation for commercial annealed aluminium electrical conductor wire
Lays down the electrical resistivity, tensile strength and elongation of commercial annealed aluminium electrical conductor wire having a diameter greater than 1 mm (0.0394 in).
Recommandation concernant les fils en aluminium recuit industriel pour conducteurs électriques
Spécifie la résistivité électrique, la charge de rupture et l'élongation pour les fils en aluminium recuit industriel pour conducteurs électriques d'un diamètre supérieur à 1 mm (0,0394 in).
Recommendation for commercial annealed electrical conductor wires
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST IEC 60121:1999
01-november-1999
Recommendation for commercial annealed electrical conductor wires
Recommendation for commercial annealed aluminium electrical conductor wire
Recommandation concernant les fils en aluminium recuit industriel pour conducteurs
électriques
Ta slovenski standard je istoveten z: IEC 60121
ICS:
29.060.10 Žice Wires
29.240.20 Daljnovodi Power transmission and
distribution lines
SIST IEC 60121:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST IEC 60121:1999
---------------------- Page: 2 ----------------------
SIST IEC 60121:1999
NORME
CEI
INTERNATIONALE
IEC
60121
INTERNATIONAL
Première édition
STAN DARD
First edition
1960-01
Recommandation concernant les fils en aluminium
recuit industriel pour conducteurs électriques
Recommendation for commercial annealed
aluminium electrical conductor wire
© IEC 1960 Droits de reproduction
réservés — Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni
No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun
any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo-
including photocopying and microfilm, without permission in
copie et les microfilms, sans l'accord écrit de l'éditeur.
writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
C
PRICE CODE
International Electrotechnical Commission
IEC
McNS,gyHapOgHaR 3neKTpoTexHNVecnaA HOMHCCHA
Pour prix, voir catalogue en vigueur
• •
For price, see current catalogue
---------------------- Page: 3 ----------------------
SIST IEC 60121:1999
— 3 —
INTERNATIONAL ELECTROTECHNICAL COMMISSION
MERCIAL
RECOMMENDATION FOR COM
ANNEALED ALUMINIUM ELECTRICAL CONDUCTOR WIRE
FOREWORD
the I.E.C. on technical matters, prepared by Technical Committees on which all the
(1) The formal decisions or agreements of
National Committees having a special interest therein are represented, express, as nearly as possible, an international
consensus of opinion on the subjects dealt with.
rnational use and they are accepted by the National Committees in that
(2) They have the form of recommendations for inte
sense.
In order to promote this international unification, the I.E.C. expresses the wish that all National Committees having as
(3)
yet no national rules, when preparing such rules, shou
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.