iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 558:2008/AC:2011

(Corrigendum)

Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves

Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves

This European Standard specifies the face to face (FTF) and centre to face (CTF) dimensions for PN and Class designated metal valves used in flanged pipe systems. This standard covers valves with the following PN, Class and DN values:
PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; PN 500 Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500.
NOTE While waiting for revision of EN 1092-1 concerning PN 160, PN 250, PN 320, PN 400 and PN 500, the FTF and CTF dimensions are based on DIN 2548, DIN 2549, DIN 2550, DIN 2551, DIN 2627, DIN 2628, DIN 2629 and DIN 2638.
3 DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 800; DN 900; DN 1 000; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2 000.
For valves in other shell materials than metal the same FTF and CTF dimensions may be used.

Industriearmaturen - Baulängen von Armaturen aus Metall zum Einbau in Rohrleitungen mit Flanschen - Nach PN und Class bezeichnete Armaturen

Robinetterie industrielle - Dimensions face-à-face et face-à-axe de la robinetterie métallique utilisée dans les systèmes de canalisations à brides - Appareils de robinetterie désignés PN et Class

Industrijski ventili - Vgradne dolžine kovinskih ventilov za vgradnjo v cevovode s prirobnicami - Ventili, označeni po PN in Class

Ta evropski standard določa vgradne dolžine kovinskih ventilov, označenih po PN in Class, za vgradnjo v cevovode s prirobnicami. Ta standard zajema ventile z naslednjimi vrednostmi PN, Class in DN:
PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; PN 500 Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500.
OPOMBA Med čakanjem na revizijo EN 1092-1, ki zadeva PN 160, PN 250, PN 320, PN 400 in PN 500, vgradne dolžine temeljijo na DIN 2548, DIN 2549, DIN 2550, DIN 2551, DIN 2627, DIN 2628, DIN 2629 in DIN 2638.
3 DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 800; DN 900; DN 1000; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2000.
Za ventile, ki imajo ohišje iz drugih materialov, kot je kovina, se lahko uporabljajo iste vgradne mere.

General Information

Status
Withdrawn
Publication Date
21-Feb-2011
Withdrawal Date
02-Jan-2012
ICS
23.060.01 - Valves in general
Technical Committee
IHPV - Hydraulics and pneumatics
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
29-Dec-2011
Due Date
21-Jan-2012
Completion Date
03-Jan-2012
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 558:2008/AC:2010 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves

Relations

Corrects
SIST EN 558:2008 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
Effective Date
01-Apr-2011
Consolidated By
SIST EN 558:2008+A1:2012 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
Effective Date
18-Jan-2023
Consolidated By
SIST EN 558:2008+A1:2012 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
Effective Date
19-Jan-2023
Consolidated By
SIST EN 558:2008+A1:2012 - Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
Effective Date
01-Feb-2012

Buy Standard

EN 558:2008/AC:2011EN 558:2008/AC:2011
PreviousNext
Corrigendum
EN 558:2008/AC:2011
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industriearmaturen - Baulängen von Armaturen aus Metall zum Einbau in Rohrleitungen mit Flanschen - Nach PN und Class bezeichnete ArmaturenRobinetterie industrielle - Dimensions face-à-face et face-à-axe de la robinetterie métallique utilisée dans les systèmes de canalisations à brides - Appareils de robinetterie désignés PN et ClassIndustrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 558:2008/AC:2010SIST EN 558:2008/AC:2011en,fr,de01-april-2011SIST EN 558:2008/AC:2011SLOVENSKI
STANDARD



SIST EN 558:2008/AC:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 558:2008/AC
September 2010
Septembre 2010
September 2010 ICS 23.060.10 English version Version Française Deutsche Fassung
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
Robinetterie industrielle - Dimensions face-à-face et face-à-axe de la robinetterie métallique utilisée dans les systèmes de canalisations à brides - Appareils de robinetterie désignés PN et Class
Industriearmaturen - Baulängen von Armaturen aus Metall zum Einbau in Rohrleitungen mit Flanschen - Nach PN und Class bezeichnete Armaturen This corrigendum becomes effective on 1 September 2010 for incorporation in the three official language versions of the EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 5117:2023(Main)
Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023)
EN ISO 5117:2023

This document specifies the production and performance relevant test requirements for automatic steam traps used for condensate removal/recovery services for optimized utilization of energy, in refinery, power generation or other general applications where steam is used as a medium of heat transfer.
The tests can be classified as production tests and performance characteristic tests and can be conducted to ensure the correct functioning of a steam trap or to evaluate the performance of a particular design. This document specifies the tests performed relative to each one of these two categories and briefly describes the corresponding test methods.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10497:2023(Main)
Testing of valves - Fire type-testing requirements (ISO 10497:2022)
EN ISO 10497:2022

This document specifies fire type-testing requirements and a fire type-test method for soft- and metalseated isolation valves with one or more obturators. It is not applicable to the testing requirements for
valve actuators other than manually operated gearboxes or similar mechanisms when these form part
of the normal valve assembly. Other types of valve actuators (e.g. electrical, pneumatic or hydraulic)
can need special protection to operate in the environment considered in this valve test, and the fire
testing of such actuators is outside the scope of this document.
This document specifies the measurement and assessment criteria for:
a) through-seat leakage;
b) external leakage;
c) cavity overpressure relief of double-seated valves;
d) operability.
This document specifies the rules whereby the fire-type testing qualification for a valve can be extended
to untested sizes, pressure ratings and materials of construction of the same basic design type.
Fire test reports of valves tested according to previous editions of this document are acceptable when
submitted together with the full and compliant fire test report as per 6.7 of the edition under which it
was tested. Any data missing as required from 6.7 within the fire test report are accepted or rejected at
the purchaser’s discretion.
NOTE For the purposes of this document, the terms “fire type-test” and “fire test” are synonymous.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23632:2022(Main)
Industrial valves - Design validation-testing of valves (ISO 23632:2021)
EN ISO 23632:2022

This document specifies requirements and acceptance criteria for type testing, in compliance with design conditions, of metallic butterfly and ball valves used for isolating services for all industrial applications, and serves to validate the product design over 205 cycles.
This document excludes testing for safety devices, control valves, thermoplastics valves, and valves for water supply for human consumption and sewage (e.g. the EN 1074 series).
This document defines the procedure for extending the qualification of the tested valve to untested sizes and pressure designations of the same product range.
The purpose of this type test is to validate the seat performance within manufacturer given pressure/temperature rating, provided by the manufacturer’s technical documentation of the product. This type test verifies torque requirements and the maximum allowable stem torque (MAST), as given in the manufacturer's technical documentation. This type test validates the durability of seat performance and operating torque through mechanical and thermal cycles.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28921-1:2022(Main)
Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2022)
EN ISO 28921-1:2022

This document specifies requirements for design, dimensions, material, fabrication and production
testing of gate, globe, ball/plug and butterfly valve design types used as isolation valves and check
valves for low-temperature applications.
This document is applicable to isolation valves for use in low and cryogenic temperature service where
the design low-temperature service is -50 °C down to –196 °C.
This document does not apply to valves for cryogenic services, designed in accordance with ISO 21011,
used with cryogenic vessels.
Where the requirements of this document vary from those given in the valve product standards, the
requirements of this document apply.
This document is applicable to valves with body, bonnet, bonnet extension or cover made of metallic
materials.
This document is applicable to:
— valves of nominal sizes DN: 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400;
450; 500; 600; 650; 700; 750; 800; 850; 900; 950; 1 000; 1 050; 1 200; 1 350; 1 400; 1 500; 1 600;
1 650; 1 800,
— corresponding to nominal pipe sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16;
18; 20; 24; 26; 28; 30; 32; 34; 36; 38; 40; 42; 48; 54; 56; 60; 64; 66; 72,
and applies to pressure designations:
— PN 16; 25; 40; 100; 160; 250; 400,
— Class 150; 300; 600; 800; 900; 1 500; 2 500.
NOTE Not all type and size combination are available in all pressure ratings.
This document does not apply to safety valves and control valves.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 558:2022(Main)
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
EN 558:2022

This document specifies the "face-to-face" (FTF) and "centre-to-face" (CTF) dimensions for PN and Class designated metal valves used in flanged pipe systems.
This document covers valves with the following PN, Class and DN values:
-   PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400;
-   Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500;
-   DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1050; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2 000.
For valves in other shell materials than metal the same FTF and CTF dimensions may be used.
For relationship between DN and NPS, see Annex B.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12516-2:2015+A1:2021(Main)
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
EN 12516-2:2014+A1:2021

This European Standard specifies the method for the strength calculation of the shell with respect to internal pressure of the valve.

  • Standard
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 7368:2021(Main)
Hydraulic fluid power -- Two-port slip-in cartridge valves -- Cavities
ISO 7368:2016

ISO 7368:2016 specifies only geometrical data relating to cavities in which two-port hydraulic slip-in cartridge valves are mounted in order to ensure interchangeability.
NOTE For example, this document does not specify rated pressures.
It applies to cavities for two-port hydraulic slip-in cartridge valves which are generally applicable to industrial equipment.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    36 pages
    French language
    sale 15% off
SIST
SIST ISO 5781:2021(Main)
Hydraulic fluid power -- Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces
ISO 5781:2016

ISO 5781:2016 specifies the dimensions and other data relating to surfaces on which hydraulic pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves are mounted in order to ensure interchangeability.
It applies to mounting surfaces for hydraulic pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves, which represent current practice; they are generally applicable to industrial equipment.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
SIST
SIST EN ISO 22153:2021(Main)
Electric actuators for industrial valves - General requirements (ISO 22153:2020)
EN ISO 22153:2021

This document provides basic requirements for electric valve actuators, used for on-off and control valves. It includes guidelines for classification, design, enclosure and corrosion protection, and methods for conformity assessment.
Combinations of electric actuators and gearboxes when supplied by the actuator manufacturer are within the scope of this document.
This document does not cover solenoid actuators, electro-hydraulic actuators and electric actuators which are integral to the valves.
Other requirements or conditions of use different from those indicated in this document are agreed between the purchaser and the manufacturer/supplier, prior to order.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12569:2020(Main)
Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
EN 12569:2020

This document applies to valves of DN 15 and larger, made of metallic materials for chemical and petrochemical plants. It contains additional requirements to those contained in the relevant European product standards (e.g. EN 593, EN 1349) and EN 16668.
The use of design codes or technical rules other than described by European product standards are subject to agreement with the purchaser.
Process control devices and safety accessories are not subject of this document.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day