SIST EN 13169:2013+A1:2015
(Main)Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification
Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification
This European Standard specifies the requirements for factory made expanded perlite board products, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards, multi-layered insulation or composite insulation products.
This standard also covers composite insulation products (see Annex E).
Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.
This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.
Products with a declared thermal resistance lower than 0,15 m2K/W or a declared thermal conductivity greater than 0,070 W/(mK) at 10 °C are not covered by this standard.
This standard does not cover in situ insulation products and products intended to be used for the insulation of building equipment and industrial installations.
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Blähperlit (EPB) - Spezifikation
Diese Europäische Norm legt die Anforderungen an werkmäßig hergestellte Produkte aus Blähperlit (EPB) mit oder ohne Kaschierung oder Beschichtung fest, die für die Wärmedämmung von Gebäuden benutzt werden. Die Produkte werden in Form von Platten, als mehrlagige Dämmstoffe oder als Mehrschicht-Dämmplatten hergestellt.
Diese Europäische Norm umfasst auch Mehrschicht-Dämmplatten (siehe Anhang E).
Die in dieser Norm beschriebenen Produkte werden auch in vorgefertigten Wärmedämmsystemen und Mehrschicht-Dämmplatten angewendet. Die Eigenschaften von Systemen, in die diese Produkte integriert sind, werden nicht behandelt.
Die vorliegende Norm beschreibt die Produkteigenschaften und enthält die Prüfverfahren und Festlegungen für die Konformitätsbewertung, die Kennzeichnung und die Etikettierung.
Diese Norm legt keine Leistungsstufen für eine vorgegebene Eigenschaft fest, die ein Produkt erreichen muss, um für einen bestimmten Anwendungsfall tauglich zu sein. Die für bestimmte Anwendungen benötigten Stufen können Regelwerken oder nicht entgegenstehenden Normen entnommen werden.
Diese Norm gilt nicht für Produkte, deren Nennwert des Wärmedurchlasswiderstandes niedriger als 0,15 m2K/W oder deren Nennwert der Wärmeleitfähigkeit größer als 0,070 W/(mK) bei 10 °C ist.
Die vorliegende Norm gilt weder für in situ Dämmprodukte noch für Produkte, die zur Dämmung von haustechnischen und betriebstechnischen Anlagen vorgesehen sind.
Produits isolants thermiques pour le bâtiment - Produits manufacturés en panneaux de perlite expansée (EPB) - Spécification
La présente Norme européenne spécifie les exigences auxquelles doivent satisfaire les produits manufacturés en panneaux de perlite expansée, avec ou sans parements ou enduits de finition, utilisés pour l'isolation thermique des bâtiments. Les produits sont fabriqués sous forme de panneaux ou de produits d'isolation multicouches ou composites.
La présente norme concerne également les produits d'isolation composites, voir Annexe E.
Les produits couverts par la présente norme sont également utilisés dans les systèmes d'isolation thermique préfabriqués et les panneaux composites ; les performances des systèmes incorporant ces produits ne sont pas traitées.
La présente norme décrit les caractéristiques des produits et contient des modes opératoires d'essai, d'évaluation de la conformité, de marquage et d'étiquetage.
La présente norme ne spécifie pas, pour une propriété donnée, le niveau exigé que doit atteindre un produit pour démontrer son aptitude à l'emploi dans une application particulière. Les niveaux requis pour une application donnée figurent dans les réglementations ou normes non conflictuelles.
Les produits dont la résistance thermique déclarée à une température de 10 °C est inférieure à 0,15 m2•K/W ou dont la conductivité thermique déclarée à une température de 10 °C est supérieure à 0,070 W/(m•K) ne relèvent pas du domaine d'application de la présente norme.
Les produits isolants mis en œuvre in situ et les produits destinés à être utilisés pour l'isolation des équipements du bâtiment et des installations industrielles ne relèvent pas du domaine d'application de la présente norme.
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekspandiranega perlita (EPB) - Specifikacija
Ta evropski standard določa zahteve za površinsko obdelane ali lakirane ali površinsko neobdelane ali nelakirane proizvode iz ekspandiranega perlita v obliki plošč, ki se uporabljajo za toplotno izolacijo stavb. Proizvodi so izdelani v obliki plošč, večplastnih izolacijskih proizvodov ali kompozitnih izolacijskih proizvodov.
Ta standard zajema tudi kompozitne izolacijske proizvode (glej dodatek E).
Proizvodi iz tega standarda se uporabljajo tudi v predizdelanih sistemih toplotne izolacije in vezanih ploščah; lastnosti sistemov iz teh proizvodov niso opisane.
Ta standard opisuje lastnosti proizvodov ter zajema postopke za preskušanje, vrednotenje skladnosti, označevanje in etiketiranje.
Ta standard ne določa zahtevane ravni določene lastnosti, ki jo mora proizvod doseči, da se dokaže njegova primernost namenu za posamezno vrsto uporabe. Zahtevane ravni za posamezno uporabo so določene v uredbah ali standardih, ki niso v nasprotju s tem standardom.
Proizvodi z deklarirano toplotno upornostjo, nižjo od 0,15 m2K/W, ali deklarirano toplotno prevodnostjo, višjo od 0,070 W/(mK) pri 10 °C, v tem standardu niso zajeti.
Ta standard ne zajema toplotnoizolacijskih proizvodov, izdelanih na kraju samem, ter proizvodov za izolacijo gradbene opreme in industrijskih napeljav.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekspandiranega perlita (EPB) - SpecifikacijaWärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Blähperlit (EPB) - SpezifikationProduits isolants thermiques pour le bâtiment - Produits manufacturés en panneaux de perlite expansée (EPB) - SpécificationThermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 13169:2012+A1:2015SIST EN 13169:2013+A1:2015en,fr,de01-april-2015SIST EN 13169:2013+A1:2015SLOVENSKI
STANDARDSIST EN 13169:20131DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13169:2012+A1
February 2015 ICS 91.100.60 Supersedes EN 13169:2012English Version
Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification
Produits isolants thermiques pour le bâtiment - Produits manufacturés en panneaux de perlite expansée (EPB) - Spécification
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus Blähperlit (EPB) - Spezifikation This European Standard was approved by CEN on 6 October 2012 and includes Amendment 1 approved by CEN on 15 December 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13169:2012+A1:2015 ESIST EN 13169:2013+A1:2015
Determination of the declared values of thermal resistance and
thermal conductivity . 24 A.1 General . 24 A.2 Input data . 24 A.3 Declared values. 24 Annex B (normative)
!Product type determination" (!PTD") and factory production control (FPC) . 27 Annex C (normative)
Determination of the thermal conductivity in relation to moisture content . 31 Annex D (normative)
EPB multi-layered insulation products . 33 D.1 General . 33 D.2 Requirements . 33 D.3 Test methods . 34 D.4 !Assessment and Verification of the Constancy of Performance (AVCP)" . 34 Annex E (normative)
Composite insulation boards . 35 E.1 Description . 35 E.2 Requirements . 35 E.3 Test methods . 38 E.4 Designation code . 38 SIST EN 13169:2013+A1:2015
Additional properties . 41 F.1 General . 41 F.2 Particular profiles . 42 Annex ZA (informative)
!Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation" . 43 ZA.1 Scope and relevant characteristics . 43 ZA.2 Procedures for AVCP of factory made expanded perlite products . 46 ZA.3 CE Marking and labelling . 52 Bibliography . 55
Tables Table 1 — Thickness tolerances . 13 Table 2 — Dimensional stability under specified temperature and humidity conditions . 15 Table 3 — Levels for compressive stress or compressive strength. 15 Table 4 — Levels for deformation under specified compressive load and temperature . 16 Table 5 — Levels for water absorption by total immersion . 16 Table 6 — Levels for bending strength at constant span . 17 Table 7 — Test methods, test specimens and conditions . 20 Table A.1 — Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 25 Table B.1 — Minimum number of tests for !PTD" and minimum product testing frequencies . 27 Table B.2 — Minimum product testing frequencies for the reaction to fire characteristics . 29 Table E.1 — Classes for thickness tolerances . 36 Table E.2 — Levels of compressibility . 36 Table E.3 — Test methods, test specimens and conditions . 38 Table E.4 — Minimum number or frequencies of product testing . 39 Table F.1 — Test methods, test specimens, conditions and testing frequencies . 42 Table ZA.1.1 — Relevant clauses for factory made expanded perlite board and intended use . 44 Table ZA.1.2 — Relevant clauses for factory made expanded perlite board (composites EPB) and intended use . 45 Table ZA.2 — Systems of AVCP . 46 Table ZA.3.1 — Assignment of AVCP tasks for factory made expanded perlite board products under system 1 for reaction to fire and system 3 (see Table ZA.2) . 47 Table ZA.3.2 — Assignment of AVCP tasks for factory made expanded perlite board products under system 3 (see Table ZA.2) . 48 Table ZA.3.3 — Assignment of AVCP tasks for factory made expanded perlite board products under combined system 4 for reaction to fire and system 3 (see Table ZA.2) . 49
f) an addition to the foreword; g) an addition in 3.2; h) a new subclause 4.3.11; i) modification of Clause 7; j) modification of Clause 8; k) modification of Annex B; SIST EN 13169:2013+A1:2015
is the thermal conductivity W/(m„K) D is the declared thermal conductivity W/(m„K) i is one test result of thermal conductivity W/(m„K) mean is the mean thermal conductivity W/(m„K) 10,dry is the thermal conductivity in the dry state W/(m„K) 90/90 is the 90 % fractile with a confidence level of 90 % for the thermal conductivity W/(m„K) U Is the design thermal conductivity W/(m„K) m1 is the mass of the test specimen after 2 h total immersion in water kg m23,dry is the mass of specimen in the dry state kg m23,50 is the mass of specimen at 23 °C and 50 % relative humidity kg
is the water vapour diffusion resistance factor – N is the number of test results – RD is the declared thermal resistance m2„K/W Ri is one test result of thermal resistance m2„K/W Rmean is the mean thermal resistance m2„K/W R90/90 is the 90 % fractile with a confidence level of 90 % for the thermal resistance m2„K/W RU is the design thermal resistance m2„K/W Sb is the deviation from squareness on length and width mm/m Smax is the deviation from flatness mm sR is the estimate of the standard deviation of the thermal resistance m2„K/W s is the estimate of the standard deviation of the thermal conductivity W/(m„K) s is the dynamic stiffness MN/m3 1b is the bending strength kPa 1bc is the bending strength at a constant span kPa 1c is the declared compressive stress kPa SIST EN 13169:2013+A1:2015
BS is the symbol of the declared level of bending strength BS(z) is the symbol of the declared level of bending strength at a constant span CC(i1/i2/y)1c is the symbol of the declared level for compressive creep CP is the symbol of the declared level for compressibility CS(10\Y) is the symbol of the declared level for compressive stress or compressive strength DLT5 is the symbol of the declared level of deformation under load and temperature for 5 % deformation DS(70,-) is the symbol of the declared value for dimensional stability under specified temperature conditions DS(23,90)or DS(70,90) is the symbol of the declared value for dimensional stability under specified temperature and relative humidity conditions MU is the symbol of the declared value for water vapour diffusion resistance factor PL(2) is the symbol of the declared level of point load for 2 mm deformation SD is the symbol of the declared level of dynamic stiffness T is the symbol of the declared class for thickness tolerances TR is the symbol of the declared value for tensile strength perpendicular to faces WS is the symbol of the declared level for short term water absorption by partial immersion WS(T) is the symbol of the declared level of short term water absorption by total immersion Z is the symbol of the declared value for water vapour resistance
Abbreviated terms used in this standard: EPB is Expanded Perlite Board !PTD is Product Type Determination (previously named ITT for Initial Type Test)" FPC is Factory Production Control RtF is Reaction to Fire SIST EN 13169:2013+A1:2015
4.2.3 Thickness Thickness, d, shall be determined in accordance with EN 823, using a load equal to 250 Pa. No test result shall deviate from the nominal thickness, dN, by more than the tolerances given in Table 1. Table 1 — Thickness tolerances Dimensions in millimetres Nominal thickness dN ≤ 35 35 < dN ≤ 70 70 < dN ≤ 120 dN > 120 Tolerance ± 1 ± 2 ± 3 ± 4 This test shall not be performed when the tests described in E.2.7 are used. 4.2.4 Squareness Squareness shall be determined in accordance with EN 824. The deviation from squareness on length and width, Sb, shall not exceed 3 mm/m. 4.2.5 Flatness Flatness shall be determined in accordance with EN 825. The deviation from flatness, Smax, shall not exceed the following: — 3 mm for length and width not exceeding 1 200 mm; — 5 mm for length and width exceeding 1 200 mm.
4.2.6 Bending strength Bending strength, 1b, shall be determined in accordance with EN 12089. For handling purpose, the bending strength of boards shall not be less than 250 kPa. SIST EN 13169:2013+A1:2015
shall be greater than the declared value and no test result of Z shall be less than the declared value. In the absence of measurements, the water vapour diffusion resistance factor, , of expanded perlite board-products, either unfaced, or faced with a fabric with an open structure, may be assumed to be equal to 5. Alternatively for the declaration of the water vapour diffusion resistance factor, , of EPB products, values quoted in EN ISO 10456 may be used. SIST EN 13169:2013+A1:2015
Moisture content, u23,50, expressed in kilogram per kilogram, shall be determined by weighing the specimens at each step with an accuracy of 0,1 g, and calculated using Formula (1): 23,drydry2350235023mmmu,,,−= (1) 5.3 Testing 5.3.1 General Table 7 gives the dimensions of the test specimens, the minimum number of measureme
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...