SIST EN ISO 4629-2:2016
(Main)Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst (ISO 4629-2:2016)
Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric method using a catalyst (ISO 4629-2:2016)
This International Standard specifies a titrimetric method for determining the hydroxyl value of resins, binders for paints and varnishes, primary alcohols, glycols and fats. Wheter it can be applied for hydrocarboxylic acids, phenolic hydroxyl groups, polyols such as trimethyl propane and substances containing aromatic groups have been activated for Friedel-Crafts acylation shall be decided on case-to-case basis.
Under the right conditions, the method is also applicable for determining the hydroxyl value of castor oil and its derivates.
Bindemittel für Beschichtungsstoffe - Bestimmung der Hydroxylzahl - Teil 2: Titrimetrisches Verfahren mit Katalysator (ISO 4629-2:2016)
Diese Internationale Norm legt ein titrimetrisches Verfahren zum Bestimmen der Hydroxylzahl von Harzen, Bindemittteln für Beschichtungsstoffe, primären Alkoholen, Glykolen und Fetten fest. Die Anwendbarkeit des Verfahrens für Hydroxysäuren, phenolische Hydroxylgruppen, einige Polyole, wie z. B. Trimethylolpropan, und für Substanzen mit aromatischen Gruppierungen, die für die Friedel-Crafts-Acylierung aktiviert sind, muss im Einzelfall geprüft werden.
Bei Anpassung der Bedingungen ist das Verfahren auch zum Bestimmen der Hydroxylzahl von Rizinusöl und seiner Derivate geeignet.
Liants pour peintures et vernis - Détermination de l'indice d'hydroxyle - Partie 2: Méthode utilisant d'un catalyseur (ISO 4629-2:2016)
ISO 4629-2:2016 spécifie une méthode titrimétrique permettant de déterminer l'indice d'hydroxyle des résines, des liants pour peintures et vernis, des alcools primaires, des glycols et des matières grasses. Son applicabilité pour les acides hydrocarboxyliques, les groupes hydroxyle phénoliques, les polyols tels que le triméthylpropane et les substances contenant des groupes aromatiques activés pour une acylation de Friedel-Crafts, doit être déterminée au cas par cas.
Dans les conditions appropriées, la méthode est également applicable pour déterminer l'indice d'hydroxyle de l'huile de ricin et de ses dérivés.
Veziva za barve in lake - Ugotavljanje bazičnosti - 2. del: Titrimetrijska metoda z uporabo katalizatorja (ISO 4629-2:2016)
Ta mednarodni standard določa titrimetrično metodo za določane hidroksilne vrednosti smol, veziv za barve in lake, primarne alkohole, glikole in maščobe. Ali ga je mogoče uporabiti za hidrokarboksilne kisline, fenolne hidroksilne skupine, poliole, kot je trimetil propan, in snovi, ki vsebujejo aromatične skupine, ki so bile aktivirane za Friedel-Craftsovo aciliranje, je treba določiti za vsak primer posebej. Pod pravimi pogoji se metoda uporablja tudi za določanje hidroksilne vrednosti ricinusovega olja in njegovih derivatov.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4629-2:2016
01-september-2016
9H]LYD]DEDUYHLQODNH8JRWDYOMDQMHED]LþQRVWLGHO 7LWULPHWULMVNDPHWRGD]
XSRUDERNDWDOL]DWRUMD ,62
Binders for paints and varnishes - Determination of hydroxyl value - Part 2: Titrimetric
method using a catalyst (ISO 4629-2:2016)
Bindemittel für Beschichtungsstoffe - Bestimmung der Hydroxylzahl - Teil 2:
Titrimetrisches Verfahren mit Katalysator (ISO 4629-2:2016)
Liants pour peintures et vernis - Détermination de l'indice d'hydroxyle - Partie 2: Méthode
utilisant d'un catalyseur (ISO 4629-2:2016)
Ta slovenski standard je istoveten z: EN ISO 4629-2:2016
ICS:
87.060.20 Veziva Binders
SIST EN ISO 4629-2:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4629-2:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 4629-2:2016
EN ISO 4629-2
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2016
EUROPÄISCHE NORM
ICS 87.060.20
English Version
Binders for paints and varnishes - Determination of
hydroxyl value - Part 2: Titrimetric method using a catalyst
(ISO 4629-2:2016)
Liants pour peintures et vernis - Détermination de Bindemittel für Beschichtungsstoffe - Bestimmung der
l'indice d'hydroxyle - Partie 2: Méthode titrimétrique Hydroxylzahl - Teil 2: Verfahren mit Katalysator (ISO
utilisant un catalyseur (ISO 4629-2:2016) 4629-2:2016)
This European Standard was approved by CEN on 19 May 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4629-2:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4629-2:2016
EN ISO 4629-2:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4629-2:2016
EN ISO 4629-2:2016 (E)
European foreword
This document (EN ISO 4629-2:2016) has been prepared by Technical Committee ISO/TC 35 “Paints
and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2016, and conflicting national standards
shall be withdrawn at the latest by December 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4629-2:2016 has been approved by CEN as EN ISO 4629-2:2016 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 4629-2:2016
---------------------- Page: 6 ----------------------
SIST EN ISO 4629-2:2016
INTERNATIONAL ISO
STANDARD 4629-2
First edition
2016-06-01
Binders for paints and varnishes —
Determination of hydroxyl value —
Part 2:
Titrimetric method using a catalyst
Liants pour peintures et vernis — Détermination de l’indice
d’hydroxyle —
Partie 2: Méthode titrimétrique utilisant un catalyseur
Reference number
ISO 4629-2:2016(E)
©
ISO 2016
---------------------- Page: 7 ----------------------
SIST EN ISO 4629-2:2016
ISO 4629-2:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 4629-2:2016
ISO 4629-2:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 2
6 Apparatus . 2
7 Sampling . 3
8 Procedure. 3
8.1 Number of determinations . 3
8.2 Test portion . 3
8.3 Determination . 3
8.4 Blank test . 4
8.5 Determination of acid value . 4
9 Expression of results . 4
10 Precision . 4
10.1 Repeatability . 4
10.2 Reproducibility . 4
11 Test report . 5
Bibliography . 6
© ISO 2016 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 4629-2:2016
ISO 4629-2:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on al
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.