iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 689:1998

(Main)

Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy

Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy

This European standard gives guidance for the assessment of exposure to chemical agents in workplace atmospheres. It describes a strategy to compare workers'exposure by inhalation with relevant limit values for chemical agents in workplace and measurement strategy.

Arbeitsplatzatmosphäre - Anleitung zur Ermittlung der inhalativen Exposition gegenüber chemischen Stoffen zum Vergleich mit Grenzwerten und Meßstrategie

Diese europäische Norm enthält Anleitungen zur Ermittlung der Exposition gegenüber chemischen Stoffen in der Arbeitsplatzatmosphäre. Sie beschreibt eine Vorgehensweise für den Vergleich der inhalativen Exposition von Arbeitnehmern mit einschlägigen Grenzwerten für chemische Stoffe in der Luft am Arbeitsplatz und die Messstrategie.

Atmospheres des lieux de travail - Conseils pour l'évaluation de l'exposition aux agents chimiques aux fins de comparaison avec des valeurs limites et stratégie de mesurage

La présente norme européenne donne des recommandations pour l'évaluation de l'exposition aux agents chimiques dans l'air des lieux de travail. Elle décrit une stratégie pour comparer l'exposition des travailleurs par inhalation avec les valeurs limites pour les agents chimiques sur les lieux de travail et une stratégie de mesurage.

Zrak na delovnem mestu - Navodilo za oceno izpostavljenosti pri vdihavanju kemičnih snovi za primerjavo z mejnimi vrednostmi in načrtovanje meritev

General Information

Status
Withdrawn
Publication Date
30-Apr-1998
Withdrawal Date
30-May-2018
ICS
13.040.30 - Workplace atmospheres
Technical Committee
KAZ - Air quality
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-May-2018
Due Date
13-Jun-2018
Completion Date
31-May-2018
Ref Project
EN 689:1995 - Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy

Relations

Replaced By
SIST EN 689:2018 - Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values
Effective Date
01-Jul-2018

Buy Standard

EN 689:1998EN 689:1998
PreviousNext
Standard
EN 689:1998
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 689:1998
01-maj-1998
=UDNQDGHORYQHPPHVWX1DYRGLOR]DRFHQRL]SRVWDYOMHQRVWLSULYGLKDYDQMX
NHPLþQLKVQRYL]DSULPHUMDYR]PHMQLPLYUHGQRVWPLLQQDþUWRYDQMHPHULWHY
Workplace atmospheres - Guidance for the assessment of exposure by inhalation to
chemical agents for comparison with limit values and measurement strategy
Arbeitsplatzatmosphäre - Anleitung zur Ermittlung der inhalativen Exposition gegenüber
chemischen Stoffen zum Vergleich mit Grenzwerten und Meßstrategie
Atmospheres des lieux de travail - Conseils pour l'évaluation de l'exposition aux agents
chimiques aux fins de comparaison avec des valeurs limites et stratégie de mesurage
Ta slovenski standard je istoveten z: EN 689:1995
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
SIST EN 689:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 689:1998

---------------------- Page: 2 ----------------------

SIST EN 689:1998

---------------------- Page: 3 ----------------------

SIST EN 689:1998

---------------------- Page: 4 ----------------------

SIST EN 689:1998

---------------------- Page: 5 ----------------------

SIST EN 689:1998

---------------------- Page: 6 ----------------------

SIST EN 689:1998

---------------------- Page: 7 ----------------------

SIST EN 689:1998

---------------------- Page: 8 ----------------------

SIST EN 689:1998

---------------------- Page: 9 ----------------------

SIST EN 689:1998

---------------------- Page: 10 ----------------------

SIST EN 689:1998

---------------------- Page: 11 ----------------------

SIST EN 689:1998

---------------------- Page: 12 ----------------------

SIST EN 689:1998
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST ISO 8518:2023(Main)
Workplace air - Determination of particulate lead and lead compounds - Flame and electrothermal atomic absorption spectrometric methods
ISO 8518:2022

This document specifies flame and electrothermal atomic absorption spectrometric methods for the determination of the time-weighted average mass concentration of particulate lead and lead compounds in workplace air.
These methods are typically applicable to personal sampling of the inhalable fraction of airborne particles, as defined in ISO 7708, and to static (area) sampling. It can be applied to other health-related fractions as required.
The sample dissolution procedure specifies hot plate or microwave assisted digestion, or ultrasonic extraction (see 11.2). The use of an alternative, more vigorous dissolution procedure is necessary when it is desired to extract lead from compounds present in the test atmosphere that are insoluble using the dissolution procedures described herein (see Clause 5).
The flame atomic absorption method is applicable to the determination of masses of approximately 1 µg to 200 µg of lead per sample, without dilution[1]. The electrothermal atomic absorption method is applicable to the determination of masses of approximately 0,01 µg to 0,5 µg of lead per sample, without dilution[1].
The ultrasonic extraction procedure has been validated for the determination of masses of approximately 20 µg to 100 µg of lead per sample, for laboratory-generated lead fume air filter samples[2].
The concentration range for lead in air for which this procedure is applicable is determined in part by the sampling procedure selected by the user (see 10.1).

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    31 pages
    English language
    sale 15% off
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23861:2023(Main)
Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
EN ISO 23861:2022

This document specifies performance requirements and test methods under prescribed laboratory conditions for the evaluation of pumped samplers used in conjunction with an air sampling pump and of procedures using these samplers for the determination of semi-volatile chemical agent in workplace atmospheres. The procedures given in this document provide results only for the sum of airborne particles and vapour. The concentration is calculated in terms of mass per unit volume. This document is applicable to pumped samplers and measuring procedures using these samplers in which sampling and analysis are carried out in separate stages.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13137:2023(Main)
Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2022)
EN ISO 13137:2022

This document specifies performance requirements for battery powered pumps used for personal
sampling of chemical and biological agents in workplace air. It also specifies test methods in order to
determine the performance characteristics of such pumps under prescribed laboratory conditions.
This document is applicable to battery powered pumps having a nominal volumetric flow rate above
10 ml ⋅ min−1, as used with combinations of sampler and collection substrate for sampling of gases,
vapours, dusts, fumes, mists and fibres.
This document is primarily intended for flow-controlled pumps.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23320:2022(Main)
Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
EN ISO 23320:2022

This document specifies performance requirements and test methods under prescribed laboratory conditions for the evaluation of diffusive samplers and of procedures using these samplers for the determination of gases and vapours in workplace atmospheres.
This document is applicable to diffusive samplers and measuring procedures using these samplers in which sampling and analysis are carried out in separate stages.
This document is not applicable to
—   diffusive samplers which are used for the direct determination of concentrations,
—   diffusive samplers which rely on sorption into a liquid.
This document addresses requirements for method developers and/or manufacturers.
NOTE   For the purposes of this document a manufacturer can be any commercial or non-commercial entity.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1540:2022(Main)
Workplace exposure - Terminology
EN 1540:2021

This document specifies terms and definitions that are related to the assessment of workplace exposure to chemical and biological agents. These are either general terms or are specific to physical and chemical processes of air sampling, the analytical method or method performance.
The terms included are those that have been identified as being fundamental because their definition is necessary to avoid ambiguity and ensure consistency of use.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14583:2022(Main)
Workplace exposure - Volumetric bioaerosol samplers - General requirements and evaluation of performance
EN 14583:2021

This document specifies general requirements for the use and evaluation of physical and biological performance of volumetric sampling devices applied for assessing bioaerosols in the workplace.
This document lists the criteria for the selection of microbial strains that can be used for the evaluation of biological performance of samplers.
This document also describes a bioaerosol test chamber suited for assessing the biological performance of bioaerosol sampling devices.
This document is not applicable for clean room measurements.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14031:2021(Main)
Workplace exposure - Quantitative measurement of airborne endotoxins
EN 14031:2021

This document specifies methods for the quantitative measurement of airborne endotoxins and gives general requirements for sampling on filters, transportation, storage as well as the analysis of samples.
This document provides also guidelines for the assessment of workplace exposure to airborne endotoxins.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 482:2021(Main)
Workplace exposure - Procedures for the determination of the concentration of chemical agents - Basic performance requirements
EN 482:2021

This European Standard specifies general requirements for the performance of procedures for the determination of the concentration of chemical agents in workplace atmospheres as required by the Chemical Agents Directive 98/24/EC. The requirements given apply to all measuring procedures, irrespective of the physical form of the chemical agent (gas, vapour, airborne particles), the sampling method and the analytical method used. This European Standard is applicable to all steps of a measuring procedure,
measuring procedures with separate sampling and analysis steps, and direct-reading devices.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17289-3:2021(Main)
Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 3: Sedimentation method
EN 17289-3:2020

The purpose of this document is to allow users to determine the fine fraction with the calculation
method. It also describes the assumptions and preconditions to be met in order for this method
to be valid. This calculation method is applicable only after experiments have shown that the
results are accurate and consistently equal or higher than the results from sedimentation, as
described in Part 2, for that particular bulk material.
For preparation of the sample and determination of crystalline silica by XRD and FTIR
the users
can refer to Part 1.
An informative annex describes a specific method for the evaluation of the FF recommended for
diatomaceous earth bulk materials. Due to the internal porosity of diatomaceous earth, the
general instructions given in this part of the standard are adapted in order to take into account
the material’s effective density.
This document is applicable for bulk materials that contain particles in the size range from 0,1
μm to 125 μm satisfying with the criteria given in this part and Part 2. The current industrial
minerals within the scope of this method are: quartz, clay, kaolin, talc, feldspar, mica,
cristobalite, vermiculite, diatomaceous earth, barite and andalusite. The method may be
applicable to other bulk materials, following full investigation and validation.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17289-1:2021(Main)
Characterization of bulk materials - Determination of a size-weighted fine fraction and crystalline silica content - Part 1: General information and choice of test methods
EN 17289-1:2020

The purpose of this document is to allow users to evaluate bulk materials with regard to the
amount of fine fraction of potentially hazardous substances, especially crystalline silica. This Part
1 describes the requirements and choice of test method. It provides the user with guidance on
how to select the method as well as the preparation of the sample and determination of
crystalline silica by XRD and FTIR.
This document is applicable for bulk materials that contain particles in the size range from 0,1
μm to 125 μm satisfying with the criteria given in Part 2 and Part 3 of this document series. The
current industrial minerals within the scope of this method are: quartz, clay, kaolin, talc, feldspar,
mica, cristobalite, vermiculite, diatomaceous earth, barite and andalusite. The method may be
applicable to other bulk materials, following full investigation and validation.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day