SIST EN 10244-2:2023

SLOVENSKI STANDARD
oSIST prEN 10244-2:2022
01-oktober-2022
Jeklena žica in žični izdelki - Neželezne kovinske prevleke na jekleni žici - 2. del:
Prevleke iz cinka in cinkovih zlitin
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc
or zinc alloy coatings
Stahldraht und Drahterzeugnisse - Überzüge aus Nichteisenmetall auf Stahldraht - Teil
2: Überzüge aus Zink oder Zinklegierungen
Fils et produits tréfilés en acier - Revêtements métalliques non ferreux sur fils d'acier -
Partie 2 : Revêtement de zinc ou d'alliage de zinc
Ta slovenski standard je istoveten z: prEN 10244-2
ICS:
25.220.40 Kovinske prevleke Metallic coatings
77.140.65 Jeklene žice, jeklene vrvi in Steel wire, wire ropes and
verige link chains
oSIST prEN 10244-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 10244-2:2022

---------------------- Page: 2 ----------------------
oSIST prEN 10244-2:2022


DRAFT
EUROPEAN STANDARD
prEN 10244-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2022
ICS 25.220.40; 77.140.65 Will supersede EN 10244-2:2009
English Version

Steel wire and wire products - Non-ferrous metallic
coatings on steel wire - Part 2: Zinc or zinc alloy coatings
Fils et produits tréfilés en acier - Revêtements Stahldraht und Drahterzeugnisse - Überzüge aus
métalliques non ferreux sur fils d'acier - Partie 2 : Nichteisenmetall auf Stahldraht - Teil 2: Überzüge aus
Revêtement de zinc ou d'alliage de zinc Zink oder Zinklegierungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 6.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10244-2:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 10244-2:2022
prEN 10244-2:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Coating requirements. 4
4.1 Requirements for the coatings material . 4
4.2 Requirements relating to coating on the wire . 5
4.2.1 Coating mass . 5
4.2.2 Appearance of coating . 7
...