Resistance welding Equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016)

ISO 10656:2016 specifies additional requirements to those given in ISO 5826 for single-phase transformers used in AC welding. It is intended to be used in conjunction with ISO 5826, whose requirements it amends.

Widerstandsschweißeinrichtungen - Transformatoren - Integrierte Transformatoren für Schweißzangen (ISO 10656:2016)

Diese Internationale Norm legt Anforderungen an einphasige Transformatoren für das Schweißen mit Wechselstrom fest, die zusätzlich zu den in ISO 5826 angegebenen Anforderungen anzuwenden sind. Es ist vorgesehen, dass sie in Verbindung mit ISO 5826 genutzt wird, deren Anforderungen sie ergänzt.

Matériel de soudage par résistance - Transformateurs - Transformateurs incorporés pour pinces à souder (ISO 10656:2016)

L'ISO 10656 :2016 spécifie les exigences supplémentaires par rapport à celles données dans l'ISO 5826 pour les transformateurs monophasés utilisés pour le soudage en courant alternatif. Elle est destinée à être utilisée conjointement avec l'ISO 5826 dont elle modifie les exigences.

Oprema za uporovno varjenje - Transformatorji - Integrirani transformatorji za varilne klešče (ISO 10656:2016)

General Information

Status
Published
Public Enquiry End Date
02-Nov-2020
Publication Date
04-Feb-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-Jan-2021
Due Date
28-Mar-2021
Completion Date
05-Feb-2021

Buy Standard

Standard
EN ISO 10656:2021
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 10656:2020
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10656:2021
01-marec-2021
Oprema za uporovno varjenje - Transformatorji - Integrirani transformatorji za
varilne klešče (ISO 10656:2016)
Resistance welding Equipment - Transformers - Integrated transformers for welding guns
(ISO 10656:2016)
Widerstandsschweißeinrichtungen - Transformatoren - Integrierte Transformatoren für
Schweißzangen (ISO 10656:2016)
Matériel de soudage par résistance - Transformateurs - Transformateurs incorporés pour
pinces à souder (ISO 10656:2016)
Ta slovenski standard je istoveten z: EN ISO 10656:2021
ICS:
25.160.30 Varilna oprema Welding equipment
29.180 Transformatorji. Dušilke Transformers. Reactors
SIST EN ISO 10656:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10656:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 10656:2021


EN ISO 10656
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2021
EUROPÄISCHE NORM
ICS 25.160.30; 29.180
English Version

Resistance welding equipment - Transformers - Integrated
transformers for welding guns (ISO 10656:2016)
Matériel de soudage par résistance - Transformateurs - Widerstandsschweißeinrichtungen - Transformatoren
Transformateurs incorporés pour pinces à souder (ISO - Integrierte Transformatoren für Schweißzangen (ISO
10656:2016) 10656:2016)
This European Standard was approved by CEN on 6 December 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10656:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10656:2021
EN ISO 10656:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10656:2021
EN ISO 10656:2021 (E)
European foreword
The text of ISO 10656:2016 has been prepared by Technical Committee ISO/TC 44 "Welding and allied
processes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 10656:2021 by Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat
of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2021, and conflicting national standards shall be
withdrawn at the latest by July 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10656:2016 has been approved by CEN as EN ISO 10656:2021 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 10656:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 10656:2021
INTERNATIONAL ISO
STANDARD 10656
Second edition
2016-05-01
Corrected version
2016-08-15
Resistance welding equipment —
Transformers — Integrated
transformers for welding guns
Matériel de soudage par résistance — Transformateurs —
Transformateurs incorporés pour pinces à souder
Reference number
ISO 10656:2016(E)
©
ISO 2016

---------------------- Page: 7 ----------------------
SIST EN ISO 10656:2021
ISO 10656:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 10656:2021
ISO 10656:2016(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Dimensions and characteristics of transformers . 1
4 Additional equipment . 6
4.1 Grounding provision . 6
4.2 Thermal protection . 6
4.3 Output current sensing coil . 6
5 Marking . 7
5.1 General . 7
5.2 Rating plate . 7
5.3 Colour of exterior finish . 7
6 Designation . 8
7 Test conditions . 8
7.1 Type tests . 8
7.1.1 Mechanical strength . 8
7.1.2 Dynamic behaviour of the output terminals . 8
7.2 Thermal test (type test) . 9
Annex A (informative) Secondary current and duty cycle .10
Bibliography .11
© ISO 2016 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 10656:2021
ISO 10656:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its fur
...

SLOVENSKI STANDARD
oSIST prEN ISO 10656:2020
01-oktober-2020
Oprema za uporovno varjenje - Transformatorji - Integrirani transformatorji za
varilne aparate/pištole (ISO 10656:2016)
Resistance welding Equipment - Transformers - Integrated transformers for welding guns
(ISO 10656:2016)
Widerstandsschweißeinrichtungen - Transformatoren - Integrierte Transformatoren für
Schweißzangen (ISO 10656:2016)
Matériel de soudage par résistance - Transformateurs - Transformateurs incorporés pour
pinces à souder (ISO 10656:2016)
Ta slovenski standard je istoveten z: prEN ISO 10656
ICS:
25.160.30 Varilna oprema Welding equipment
29.180 Transformatorji. Dušilke Transformers. Reactors
oSIST prEN ISO 10656:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10656:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10656:2020
INTERNATIONAL ISO
STANDARD 10656
Second edition
2016-05-01
Corrected version
2016-08-15
Resistance welding equipment —
Transformers — Integrated
transformers for welding guns
Matériel de soudage par résistance — Transformateurs —
Transformateurs incorporés pour pinces à souder
Reference number
ISO 10656:2016(E)
©
ISO 2016

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10656:2020
ISO 10656:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10656:2020
ISO 10656:2016(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Dimensions and characteristics of transformers . 1
4 Additional equipment . 6
4.1 Grounding provision . 6
4.2 Thermal protection . 6
4.3 Output current sensing coil . 6
5 Marking . 7
5.1 General . 7
5.2 Rating plate . 7
5.3 Colour of exterior finish . 7
6 Designation . 8
7 Test conditions . 8
7.1 Type tests . 8
7.1.1 Mechanical strength . 8
7.1.2 Dynamic behaviour of the output terminals . 8
7.2 Thermal test (type test) . 9
Annex A (informative) Secondary current and duty cycle .10
Bibliography .11
© ISO 2016 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 10656:2020
ISO 10656:2016(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
The committee responsible for this document is ISO/TC ISO/TC 44, Welding and allied processes,
Subcommittee SC 6, Resistance Welding and allied mechanical joining.
This second edition cancels and replaces the first edition (ISO 10656:1996), which has been technically
revised. It also incorporates the Technical Corrigendum ISO 10656:1996/Cor. 1:2000.
This corrected version of ISO 10656:2016 incorporates the following corrections:
— the example of a designation in Clause 6 has been dated with the year of publication;
— a key has been added to Figure A.1.
Requests for official interpretations of any aspect of this International Standard should be directed to
the Secretariat of ISO/TC 44/SC 6 via your national standards body. A complete listing of these bodies
can be found at www.iso.org.
iv © ISO 2016 – All rights reserved

-------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.