iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 29461-4:2024

(Main)

Air intake filter systems for rotary machinery - Part 4: Test methods for static filter systems in coastal and offshore environments (ISO/DIS 29461-4:2024)

Air intake filter systems for rotary machinery - Part 4: Test methods for static filter systems in coastal and offshore environments (ISO/DIS 29461-4:2024)

The ISO 29461 standards specifies methods and procedures to determine the performance of particulate air filters used in air intake filter systems for rotary machinery such as gas turbines, compressors and other internal combustion engines.
The ISO 29461-4 of the standard specifies methods for performance testing of individual filter elements and of the complete filtration system used in Marine and offshore environments. This procedure is intended for filter elements and filter systems which operate at flow rated up to 8000 m3/h per filter element.

Ansaugfiltersysteme von Rotationsmaschinen - Prüfverfahren - Teil 4: Prüfverfahren für statische Filtersysteme in Meeres- und Offshore-Umgebungen (ISO/DIS 29461-4:2024)

Systèmes de filtration d'air d'admission pour machines tournantes - Partie 4: Méthodes d'essai des systèmes de filtration statique en milieu côtier et offshore (ISO/DIS 29461-4:2024)

Zračni filtrski sistemi rotacijskih strojev - 4. del: Preskusne metode za statične filtrirne sisteme v obalnih in priobalnih okoljih (ISO/DIS 29461-4:2024)

General Information

Status
Not Published
Public Enquiry End Date
25-Apr-2024
ICS
29.160.99 - Other standards related to rotating machinery
Technical Committee
I13 - Imaginarni 13
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
16-Feb-2024
Due Date
05-Jul-2024
Ref Project
prEN ISO 29461-4 - Air intake filter systems for rotary machinery - Part 4: Test methods for static filter systems in coastal and offshore environments (ISO/DIS 29461-4:2024)

Buy Standard

prEN ISO 29461-4:2024prEN ISO 29461-4:2024
PreviousNext
Draft
prEN ISO 29461-4:2024
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 29461-4:2024
01-april-2024
Zračni filtrski sistemi rotacijskih strojev - 4. del: Preskusne metode za statične
filtrirne sisteme v obalnih in priobalnih okoljih (ISO/DIS 29461-4:2024)
Air intake filter systems for rotary machinery - Part 4: Test methods for static filter
systems in coastal and offshore environments (ISO/DIS 29461-4:2024)
Ansaugfiltersysteme von Rotationsmaschinen - Prüfverfahren - Teil 4: Prüfverfahren für
statische Filtersysteme in Meeres- und Offshore-Umgebungen (ISO/DIS 29461-4:2024)
Systèmes de filtration d'air d'admission pour machines tournantes - Partie 4: Méthodes
d'essai des systèmes de filtration statique en milieu côtier et offshore (ISO/DIS 29461-
4:2024)
Ta slovenski standard je istoveten z: prEN ISO 29461-4
ICS:
29.160.99 Drugi standardi v zvezi z Other standards related to
rotacijskimi stroji rotating machinery
oSIST prEN ISO 29461-4:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 29461-4:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 29461-4:2024
DRAFT
International
Standard
ISO/DIS 29461-4
ISO/TC 142
Air intake filter systems for rotary
Secretariat: UNI
machinery —
Voting begins on:
Part 4: 2024-02-07
Test methods for static filter
Voting terminates on:
2024-05-01
systems in coastal and offshore
environments
Systèmes de filtration d'air d'admission pour machines
tournantes —
Partie 4: Méthodes d'essai des systèmes de filtration statique en
milieu côtier et offshore
ICS: 29.160.99
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 29461-4:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 29461-4:2024
DRAFT
ISO/DIS 29461-4:2024(en)
International
Standard
ISO/DIS 29461-4
ISO/TC 142
Air intake filter systems for rotary
Secretariat: UNI
machinery —
Voting begins on:
Part 4:
Test methods for static filter
Voting terminates on:
systems in coastal and offshore
environments
Systèmes de filtration d'air d'admission pour machines
tournantes —
Partie 4: Méthodes d'essai des systèmes de filtration statique en
milieu côtier et offshore
ICS: 29.160.99
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 29461-4:2023(en)
© ISO 2023
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 29461-4:2024
ISO/DIS 29461-4:2023(en)
Contents Page
Foreword .v
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 29461-2:2022(Main)
Air intake filter systems for rotary machinery - Test methods - Part 2: Filter element endurance test in fog and mist environments (ISO 29461-2:2022)
EN ISO 29461-2:2022

This standard specifies general requirements, test rig and equipment, qualification, test materials, test procedure and report for determining water endurance performance of air filter elements used in air intake filtration systems for rotary machinery such as stationary gas turbines, compressors and other stationary internal combustion engines

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 29461-1:2021(Main)
Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2021)
EN ISO 29461-1:2021

This document specifies methods and procedures for determining the static performance of particulate
air filters used in air intake filter systems for rotary machinery such as stationary gas turbines,
compressors and other stationary internal combustion engines. It applies to air filters with an efficiency
of 85 % or more for the MPPS (EPA and HEPA filters) which are tested according to ISO 29463 (all parts)
and filters with a lower efficiency which are tested according to ISO 16890 (all parts). The procedures
described in both ISO 16890 (all parts) and ISO 29463 (all parts) are applied and extended by this
document to air filters which operate at flow rates within the range 0,24 m3/s (850 m3/h) up to
2,36 m3/s (8 500 m3/h).
Static filter systems normally use multiple stages of coarse, fine and optional EPA or HEPA filter elements
to protect the machinery. The scope of this document includes methods for performance testing of
individual filter elements. It does not include methods for the direct measurement of the performance
of entire systems as installed in service except in cases where they can meet the qualification criteria
for the test assembly. Nevertheless, cumulative filter efficiencies of multistage systems of fine filters
can be calculated by using the methods described in ISO 16890-1.
This document refers to static (barrier) filter systems but can also be applied to other filter types and
systems in appropriate circumstances, for example to evaluate the initial efficiency of cleanable and
surface loading filters.
The performance results obtained in accordance with this document cannot be quantitatively applied
(by themselves) to predict performance in service with regard to efficiency and lifetime

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN ISO 29461-3:2024(Main)
Air filter intake systems for rotary machinery - Test methods - Part 3: Mechanical integrity of filter elements (ISO/FDIS 29461-3:2024)
FprEN ISO 29461-3

8. Scope
The ISO 29461 series specifies methods and procedures to determine the performance of particulate
air filters used in air intake filter systems for rotary machinery such as gas turbines, compressors and
other internal combustion engines.
The ISO 29461-3 of the standard specifies a method and procedure to test the mechanical integrity
(“Burst Test”) of individual filter elements up to an abnormal final test pressure drop of maximum 6250
Pa. Any other customer defined final pressure drop up to a maximum of 8000 Pa shall be reported as
variation from the standard. It is within the liability of the user to define the maximum possible value
(lower or higher) for a certain application and to define the burst strength requirements for this test
procedure. As the pressure drops under typical operating conditions are on a much lower level, it is not
intended to specify a final pressure drop for any application within this procedure.
This procedure is intended for all types of filter elements (e.g. V-bank cassette filters or filter cartridges)
used in the final stage(s) of an Air Intake Filter Systems for Rotary Machinery in various environmental
conditions, as e.g. in marine applications. These filters are operating at flow rates within the range of
0,25 m³/s (900 m³/h) up to 2,23 m³/s (8000 m³/h), no matter if it is used in a static or pulse cleaned air
intake system.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 29461-2:2022(Main)
Air intake filter systems for rotary machinery - Test methods - Part 2: Filter element endurance test in fog and mist environments (ISO 29461-2:2022)
EN ISO 29461-2:2022

This standard specifies general requirements, test rig and equipment, qualification, test materials, test procedure and report for determining water endurance performance of air filter elements used in air intake filtration systems for rotary machinery such as stationary gas turbines, compressors and other stationary internal combustion engines

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 29461-1:2021(Main)
Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2021)
EN ISO 29461-1:2021

This document specifies methods and procedures for determining the static performance of particulate
air filters used in air intake filter systems for rotary machinery such as stationary gas turbines,
compressors and other stationary internal combustion engines. It applies to air filters with an efficiency
of 85 % or more for the MPPS (EPA and HEPA filters) which are tested according to ISO 29463 (all parts)
and filters with a lower efficiency which are tested according to ISO 16890 (all parts). The procedures
described in both ISO 16890 (all parts) and ISO 29463 (all parts) are applied and extended by this
document to air filters which operate at flow rates within the range 0,24 m3/s (850 m3/h) up to
2,36 m3/s (8 500 m3/h).
Static filter systems normally use multiple stages of coarse, fine and optional EPA or HEPA filter elements
to protect the machinery. The scope of this document includes methods for performance testing of
individual filter elements. It does not include methods for the direct measurement of the performance
of entire systems as installed in service except in cases where they can meet the qualification criteria
for the test assembly. Nevertheless, cumulative filter efficiencies of multistage systems of fine filters
can be calculated by using the methods described in ISO 16890-1.
This document refers to static (barrier) filter systems but can also be applied to other filter types and
systems in appropriate circumstances, for example to evaluate the initial efficiency of cleanable and
surface loading filters.
The performance results obtained in accordance with this document cannot be quantitatively applied
(by themselves) to predict performance in service with regard to efficiency and lifetime

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN ISO 29461-3:2024(Main)
Air filter intake systems for rotary machinery - Test methods - Part 3: Mechanical integrity of filter elements (ISO/FDIS 29461-3:2024)
FprEN ISO 29461-3

8. Scope
The ISO 29461 series specifies methods and procedures to determine the performance of particulate
air filters used in air intake filter systems for rotary machinery such as gas turbines, compressors and
other internal combustion engines.
The ISO 29461-3 of the standard specifies a method and procedure to test the mechanical integrity
(“Burst Test”) of individual filter elements up to an abnormal final test pressure drop of maximum 6250
Pa. Any other customer defined final pressure drop up to a maximum of 8000 Pa shall be reported as
variation from the standard. It is within the liability of the user to define the maximum possible value
(lower or higher) for a certain application and to define the burst strength requirements for this test
procedure. As the pressure drops under typical operating conditions are on a much lower level, it is not
intended to specify a final pressure drop for any application within this procedure.
This procedure is intended for all types of filter elements (e.g. V-bank cassette filters or filter cartridges)
used in the final stage(s) of an Air Intake Filter Systems for Rotary Machinery in various environmental
conditions, as e.g. in marine applications. These filters are operating at flow rates within the range of
0,25 m³/s (900 m³/h) up to 2,23 m³/s (8000 m³/h), no matter if it is used in a static or pulse cleaned air
intake system.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10364:2024(Main)
Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2024)
EN ISO 10364:2024

This document specifies methods for determining the pot life of multi-part adhesives, in order to be able to determine whether the pot life conforms to the minimum specified working life required of an adhesive.
The different methods described in this document to measure the property do not necessarily provide identical results.
The test methods described are suitable for assessing all multi–part adhesives, and especially epoxy based and polyurethane based adhesives, but they are not suitable for some acrylic-based adhesives.
NOTE 1       Some of the methods described in this document can also be suitable for determination of working life of one-part adhesives that react to humidity (e.g. PUR prepolymers).
NOTE 2       This document can also be used for assessing non-structural adhesives.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6284:2024(Main)
Technical product documentation - Construction documentation - Indication of limit deviations (ISO 6284:2023)
EN ISO 6284:2024

This document specifies methods for the indication of limit deviations on construction documents.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50716:2024(Main)
Railway Applications - Requirements for software development
EN 50716:2023

1.1 This European Standard specifies the process and technical requirements for the development of software for programmable electronic systems for use in control, command for signaling applications and any on-board of rolling stock.
This European Standard is not intended to be applied in the area of electric traction power supply (fixed installation) or for power supply and control of conventional applications, e.g. station power supply for offices, shops etc. These applications are covered typically by standards for energy distribution and/or non-railway sectors and/or local legal frameworks.
For railway related fixed installations (electric traction power control and supply) the EN 50562 is applicable.
1.2 This European Standard is applicable exclusively to software and the interaction between software and the system of which it is part.
1.3 Intentionally left blank
1.4 This European Standard applies to all software used in railway systems, including
- application programming,
- operating systems,
- support tools,
- firmware.
Application programming comprises high level programming, low level programming and special purpose programming (for example: Programmable logic controller ladder logic).
1.5 This European Standard also addresses the use of pre-existing software and tools. Such software may be used, if the specific requirements in 7.3.4.7 and 6.5.4.16 on pre-existing software and for tools in 6.7 are fulfilled.
1.6 Software developed according to any version of EN 50128 or EN 50657 will be considered as compliant and not subject to the requirements on pre-existing software.
1.7 This European Standard considers that modern application design often makes use of software that is suitable as a basis for various applications. Such software is then configured by application data for producing the executable software for the application.
1.8 Entry intentionally left empty.
1.9 This European Standard is not intended to be retrospective. It therefore applies primarily to new developments and only applies in its entirety to existing systems if these are subjected to major modifications. For minor changes, only 9.2 applies.
The assessor has to analyse the evidences provided in the software documentation to confirm whether the determination of the nature and scope of software changes is adequate. However, application of this European Standard during upgrades and maintenance of existing software is highly recommended.
1.10 For the development of User Programmable Integrated Circuits (e.g. FPGA & CPLD) guidance is provided in EN 50129:2018 Annex F for safety related functions and in EN 50155:2017 for non-safety related functions. Software running on soft-cores of User Programmable Integrated Circuits is within the scope of this European Standard.
[...]

  • Standard
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    127 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60567:2024(Main)
Oil-filled electrical equipment - Sampling of free gases and analysis of free and dissolved gases - Guidance
EN IEC 60567:2024

IEC 60567:2023 deals with the techniques for sampling free gases from gas-collecting relays from power transformers. Three methods of sampling free gases are described. The techniques for sampling oil from oil-filled equipment such as power and instrument transformers, reactors, bushings, oil-filled cables and oil-filled tank-type capacitors are no longer covered by this document, but are instead described in IEC 60475:2022, 4.2. Before analysing the gases dissolved in oil, they are first extracted from the oil. Three basic methods are described, one using extraction by vacuum (Toepler and partial degassing), another by displacement of the dissolved gases by bubbling the carrier gas through the oil sample (stripping) and the last one by partition of gases between the oil sample and a small volume of the carrier gas (headspace). The gases are analysed quantitatively after extraction by gas chromatography; a method of analysis is described. Free gases from gas-collecting relays are analysed without preliminary treatment.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day