SIST EN 50013:1998
(Main)Low-voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for particular control switches
Low-voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for particular control switches
This standard applies to control switches according to IEC Standard 337-1, with two definite positions (such as push-buttons, limit-switches and similar devices), irrespective of their construction, having terminal marking in accordance with the corresponding marking of contactor relays designated by the distinctive letter E (see EN 50 011). The use of this standard is recommended where terminal marking is a requirement of the relevant standard for control switches, or is usual practice
Industrielle Niederspannungs-Schaltgeräte - Anschlußbezeichnungen und Kennzeichen für bestimmte Befehlsgeräte
Appareillage industriel à basse tension - Marquage des bornes et nombre caractéristique pour des auxiliaires de commande particuliers
Low-voltage switchgear and controlgear for industrial use - Terminal marking and distinctive number for particular control switches
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50013:1998
01-februar-1998
Low-voltage switchgear and controlgear for industrial use - Terminal marking and
distinctive number for particular control switches
Low-voltage switchgear and controlgear for industrial use - Terminal marking and
distinctive number for particular control switches
Industrielle Niederspannungs-Schaltgeräte - Anschlußbezeichnungen und Kennzeichen
für bestimmte Befehlsgeräte
Appareillage industriel à basse tension - Marquage des bornes et nombre caractéristique
pour des auxiliaires de commande particuliers
Ta slovenski standard je istoveten z: EN 50
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.