SIST EN 60512-8-3:2011

SLOVENSKI STANDARD
SIST EN 60512-8-3:2011
01-september-2011
.RQHNWRUML]DHOHNWURQVNRRSUHPR3UHVNXVLLQPHULWYHGHO3UHVNXãDQMHV
VWDWLþQRREUHPHQLWYLMRILNVQLNRQHNWRUML3UHVNXVF5REXVWQRVWY]YRGD
Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load
tests (fixed connectors) - Test 8c: Robustness of actuating lever
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren -- Teil 8-3:
Prüfungen mit statischer Last (feste Steckverbinder) - Prüfung 8c: Mechanische
Widerstandsfähigkeit des Betätigungshebels
&RQQHFWHXUVSRXUpTXLSHPHQWVpOHFWURQLTXHV±(VVDLVHWPHVXUHV±3DUWLH(VVDLV
GHFKDUJHVWDWLTXHHPEDVHV±(VVDLF5REXVWHVVHGH
O¶HUJRWG¶DFWLYDWLRQ
Ta slovenski standard je istoveten z: EN 60512-8-3:2011
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60512-8-3:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60512-8-3:2011

---------------------- Page: 2 ----------------------

SIST EN 60512-8-3:2011

EUROPEAN STANDARD
EN 60512-8-3

NORME EUROPÉENNE
June 2011
EUROPÄISCHE NORM

ICS 31.220.01


English version


Connectors for electronic equipment -
Tests and measurements -
Part 8-3: Static load tests (fixed connectors) -
Test 8c: Robustness of actuating lever
(IEC 60512-8-3:2011)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques – Essais et mesures – Einrichtungen -
Partie 8-3: Essais de charge statique Mess- und Prüfverfahren -
(embases) – Essai 8c: Robustesse de Teil 8-3: Prüfungen mit statischer Last
l’ergot d’activation (feste Steckverbinder) -
(CEI 60512-8-3:2011) Prüfung 8c: Mechanische
Widerstandsfähigkeit des
Betätigungshebels
(IEC 60512-8-3:2011)



This European Standard was approved by CENELEC on 2011-05-12. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-8-3:2011 E

---------------------- Page: 3 ----------------------

SIST EN 60512-8-3:2011
EN 60512-8-3:2011 - 2 -
Foreword
The text of document 48B/2121/CDV, future edition 1 of IEC 60512-8-3, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-8-3 on 2011-05-12.
This standard is to be read in conjunction with EN 60512-1 and EN 60512-1-100, which explains the
structure of the EN 60512 series.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-02-12
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-05-12
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60512-8-3:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60512-14 series NOTE  Harmonized in EN 60512-14 series (not modified)
IEC 60529 NOTE  Harmonized as EN 60529.
__________

---------------------- Page: 4 ----------------------

SIST EN 60512-8-3:2011
- 3 - EN 60512-8-3:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60512-1 - Connectors for electronic equipment - Tests EN 60512-1 -
and measurements -
Part 1: General


IEC 60512-1-1 - Connectors for electronic equipment - Tests EN 60512-1-1 -
and measurements -
Part 1-1: General examination - Test 1a:
Visual examination


IEC 60512-1-100 - Connectors for electronic equipment - Tests EN 60512-1-100 -
and measurements -
Part 1-100: General - Applicable publications

---------------------- Page: 5 ----------------------

SIST EN 60512-8-3:2011

---------------------- Page: 6 ----------------------

SIST EN 60512-8-3:2011
IEC 60512-8-3
®

Edition 1.0 2011-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Connectors for electronic equipment – Tests and measurements –
Part 8-3: Static load tests (fixed connectors) – Test 8c: Robustness of actuating
lever

Connecteurs pour équipements électroniques – Essais et mesures –
Partie 8-3: Essais de charge statique (embases) – Essai 8c: Robustesse de
l’ergot d’activation

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX H
ICS 31.220.01 ISBN 978-2-88912-447-3

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60512-8-3:2011
– 2 – 60512-8-3  IEC:2011
CONTENTS
FOREWORD . 3
1 Scope and object . 5
2 Normative references . 5
3 Preparation . 5
3.1 Preparation of the specimen . 5
3.2 Equipment . 5
3.3 Mounting . 5
4 Test method . 6
4.1 Force . 6
4.2 Torque . 7
5 Final measurements . 7
6 Requirements . 7
7 Details to be specified . 7
Bibliography . 8

Figure 1 – Details of force application . 6

---------------------- Page: 8 ----------------------

SIST EN 60512-8-3:2011
60512-8-3  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –

Part 8-3: Sta
...