SIST ISO 1049:1997
(Main)Continuous mechanical handling equipment for loose bulk materials -- Vibrating conveyors and feeders with rectangular or trapezoidal trough
Continuous mechanical handling equipment for loose bulk materials -- Vibrating conveyors and feeders with rectangular or trapezoidal trough
Specifies the basic characteristics of the above mentioned handling equipment. Applies to vibrating conveyors and feeders with rectangular or trapezoidal and with flat-bottom or dished-bottom trough.
Engins de manutention continue pour produits en vrac -- Distributeurs et transporteurs vibrants à auges rectangulaires ou trapézoïdales
Naprave za kontinuirni transport sipkih materialov - Vibracijski transporterji in dodajalniki s pravokotnim in trapeznim koritom
General Information
- Status
- Published
- Publication Date
- 28-Feb-1997
- Technical Committee
- DTN - Lift and transport appliances
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Mar-1997
- Due Date
- 01-Mar-1997
- Completion Date
- 01-Mar-1997
Overview
SIST ISO 1049:1997 is an international standard that specifies the basic characteristics of continuous mechanical handling equipment designed for loose bulk materials. This standard focuses on vibrating conveyors and feeders equipped with either rectangular or trapezoidal troughs. It applies to both flat-bottom and dished-bottom trough designs, providing essential guidelines for dimensions, vibration parameters, and construction specifications. Established by the International Organization for Standardization (ISO), ISO 1049 ensures uniformity and interoperability in the design and application of vibrating conveyors and feeders, facilitating efficient and reliable bulk material handling.
Key Topics
Types of Troughs
- Rectangular troughs: standard geometric shape with flat-bottom or dished-bottom design
- Trapezoidal troughs: wider at the top than the bottom, available with flat or dished bottoms
Geometrical Specifications
- Width of trough measured as the inside width of the bottom, based on preferred number series R10
- Height of trough defined as the vertical distance from bottom to top edges, also based on preferred R10 series
- Length of trough measured as the inside length, often following preferred number series R5 for intermediate values
Vibration Parameters
- Frequencies and oscillation displacements are specified to optimize performance depending on the characteristics of the bulk material, trough length, and equipment type
- Vibrations are critical for moving bulk materials efficiently and minimizing blockage or spillage
Construction Requirements
- Equipment can feature multiple inlet and discharge points to accommodate various operational needs
- Material handling surface and trough design should meet ISO’s criteria to guarantee durability and functional efficiency
Applications
SIST ISO 1049:1997 applies broadly to industries that handle and transport loose bulk materials, such as:
- Mining and Minerals – Efficiently conveying ore, gravel, and aggregates
- Agriculture – Handling grains, seeds, and fertilizers
- Food Processing – Moving raw ingredients or processed bulk materials
- Chemical Industry – Transporting granular or powder chemicals safely
- Construction – Handling cement, sand, and other building materials
The standard is instrumental in designing vibrating feeders and conveyors that ensure smooth, continuous movement of bulk products with minimal material degradation or equipment wear. It supports operational processes where precision handling and consistent feed rates are essential for productivity.
Related Standards
- ISO 3: Preferred Numbers – Offers series of numbers used for standardizing dimensions related to trough widths, heights, and lengths in ISO 1049
- ISO 15223-1: Medical Devices - Symbols to be Used with Information to be Supplied by the Manufacturer (for specialized bulk handling in medical facilities)
- Other ISO standards covering bulk material handling equipment selection, testing, safety, and maintenance
Keywords: ISO 1049, vibrating conveyors, vibrating feeders, bulk material handling, continuous mechanical handling equipment, rectangular trough, trapezoidal trough, trough dimensions, vibration specifications, industrial conveyors, feeder design, material transport standards.
ISO 1049:1975 - Continuous mechanical handling equipment for loose bulk materials -- Vibrating conveyors and feeders with rectangular or trapezoidal trough
ISO 1049:1975 - Engins de manutention continue pour produits en vrac -- Distributeurs et transporteurs vibrants a auges rectangulaires ou trapézoidales
ISO 1049:1975 - Engins de manutention continue pour produits en vrac -- Distributeurs et transporteurs vibrants a auges rectangulaires ou trapézoidales
Frequently Asked Questions
SIST ISO 1049:1997 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Continuous mechanical handling equipment for loose bulk materials -- Vibrating conveyors and feeders with rectangular or trapezoidal trough". This standard covers: Specifies the basic characteristics of the above mentioned handling equipment. Applies to vibrating conveyors and feeders with rectangular or trapezoidal and with flat-bottom or dished-bottom trough.
Specifies the basic characteristics of the above mentioned handling equipment. Applies to vibrating conveyors and feeders with rectangular or trapezoidal and with flat-bottom or dished-bottom trough.
SIST ISO 1049:1997 is classified under the following ICS (International Classification for Standards) categories: 53.040.10 - Conveyors. The ICS classification helps identify the subject area and facilitates finding related standards.
You can purchase SIST ISO 1049:1997 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-1997
Naprave za kontinuirni transport sipkih materialov - Vibracijski transporterji in
dodajalniki s pravokotnim in trapeznim koritom
Continuous mechanical handling equipment for loose bulk materials -- Vibrating
conveyors and feeders with rectangular or trapezoidal trough
Engins de manutention continue pour produits en vrac -- Distributeurs et transporteurs
vibrants à auges rectangulaires ou trapézoïdales
Ta slovenski standard je istoveten z: ISO 1049:1975
ICS:
53.040.10 Transporterji Conveyors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TERNATIONAL STANDARD
Continuous mechanical handling equipment for loose
bulk materials -
Vibrating conveyors and feeders with
rectangular or trapezoidal trough
Engins de rnanuten tmn con tinue paur produits en vrac - Distribu teurs et transporteurs vibran ts
2 auges rec tangulaires ou trapkoi ’clales
First edition - 1975-11-01
w
-
UDC 621.8675
Ref. No. ISO 1049-1975 (E)
?
CT)
c
I
continuous handling, conveyors, bul k products, oscillating conveyors,
Descriptors : handling equipment, mechanicai feeders, specifications,
%
di mensions.
K
-
Price based on 2 pages
.
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO Member Bodies). The work of developing
International Standards is carried out through ISO Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the ISO Council.
Prior to 1972, the results of the work of the Technical Committees were published
as ISO Recommendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee ISO/TC 101 has reviewed ISO Recommendation R 1049 and found it
technically suitable for transformation. International Standard ISO 1049 therefore
replaces ISO Recommendation R 1049-1969 to which it is technically identical.
ISO Recommendation R 1049 was approved by the Member Bodies of the
following countries :
Belgium Sweden
6ermany
Brazil Greece Switzerland
Canada I ndia Turkey
Chile Israel United Kingdom
Czechoslovakia Italy U.S.S.R.
Yugoslavia
Egypt, Arab Rep. of Japan
Finland
Netherlands
France
South Africa, Rep
...
TERNATIONAL STANDARD
Continuous mechanical handling equipment for loose
bulk materials -
Vibrating conveyors and feeders with
rectangular or trapezoidal trough
Engins de rnanuten tmn con tinue paur produits en vrac - Distribu teurs et transporteurs vibran ts
2 auges rec tangulaires ou trapkoi ’clales
First edition - 1975-11-01
w
-
UDC 621.8675
Ref. No. ISO 1049-1975 (E)
?
CT)
c
I
continuous handling, conveyors, bul k products, oscillating conveyors,
Descriptors : handling equipment, mechanicai feeders, specifications,
%
di mensions.
K
-
Price based on 2 pages
.
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO Member Bodies). The work of developing
International Standards is carried out through ISO Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the ISO Council.
Prior to 1972, the results of the work of the Technical Committees were published
as ISO Recommendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee ISO/TC 101 has reviewed ISO Recommendation R 1049 and found it
technically suitable for transformation. International Standard ISO 1049 therefore
replaces ISO Recommendation R 1049-1969 to which it is technically identical.
ISO Recommendation R 1049 was approved by the Member Bodies of the
following countries :
Belgium Sweden
6ermany
Brazil Greece Switzerland
Canada I ndia Turkey
Chile Israel United Kingdom
Czechoslovakia Italy U.S.S.R.
Yugoslavia
Egypt, Arab Rep. of Japan
Finland
Netherlands
France
South Africa, Rep. of
country expressed disapproval of
The Member Body of the following the
Recommendation on technical grounds :
U.S.A.
No Member Body disapproved the transformation of ISO/R 1049 into an
International Standard.
0 International Organkation for Standardkation, 1975 l
Printed in Swi tzerland
ISO 1049-1975 (E)
INTERNATIONAL STANDARD
Continuo
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION -ME-jKJYHAPO~HAR OPI-AHM3ALIM5l l-l0 CTAHLIAPTM3ALIMM -ORGANISATION INTERNATIONALE DE NORMALISATION
Engins de manutention continue pour produits en vrac -
Distributeurs et transporteurs vibrants à auges rectangulaires
ou trapézoïdales
Con tinuous mechanical handling equipmen t for loose bulk materials - Vibra ting conve yors and feeders
with rec tangular or trapezoidal trough
Première édition - 1975-l I-01
LL
Y
CDU 621.867.5 Réf. no : ISO 1049-1975 (F)
In
R
: matériel de manutention, manutention continue, transporteur, produit en vrac, transporteur par secousses, chargeur mécanique,
Descripteurs
spécification, dimension.
t;
Prix basé sur 2 pages
.
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres ISO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
Avant 1972, les résultats des travaux des Comités Techniques étaient publiés
comme Recommandations ISO; maintenant, ces documents sont en cours de
transformation en Normes Internationales. Compte tenu de cette procédure, le
Comité Technique ISO/TC 101 a examiné la Recommandation ISO/R 1049 et est
d’avis qu’elle peut, du point de vue technique, être transformée en Norme
Internationale. La présente Norme Internationale remplace donc la
Recommandation ISO/R 1049-1969 à laquelle elle est techniquement identique.
La Recommandation lSO/R 1049 avait été approuvée par les Comités Membres des
pays suivants :
Afrique du Sud, Rép. d’ France Suède
Allemagne Grèce
Suisse
Belgique Inde
Tchécoslovaquie
Brésil Israël
Turquie
Canada Italie U.R.S.S.
Chili Japon Yougoslavie
Égypte, Rép. arabe d’ Pays-Bas
Finlande Royaume-Uni
Le Comité Membre du pays suivant avait désapprouvé la Recommandation pour des
raisons techniques :
U.S.A.
Aucun Comité Membre n’a désapprouvé la transformation de la Recommandation
lSO/R 1049 en Norme Internationale.
0 Organisation Internationale de Normalisation, 1975 l
Imprimé en Suisse
NORME INTERNATIONALE 60 1049-1975 (
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION -ME-jKJYHAPO~HAR OPI-AHM3ALIM5l l-l0 CTAHLIAPTM3ALIMM -ORGANISATION INTERNATIONALE DE NORMALISATION
Engins de manutention continue pour produits en vrac -
Distributeurs et transporteurs vibrants à auges rectangulaires
ou trapézoïdales
Con tinuous mechanical handling equipmen t for loose bulk materials - Vibra ting conve yors and feeders
with rec tangular or trapezoidal trough
Première édition - 1975-l I-01
LL
Y
CDU 621.867.5 Réf. no : ISO 1049-1975 (F)
In
R
: matériel de manutention, manutention continue, transporteur, produit en vrac, transporteur par secousses, chargeur mécanique,
Descripteurs
spécification, dimension.
t;
Prix basé sur 2 pages
.
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres ISO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
Avant 1972, les résultats des travaux des Comités Techniques étaient publiés
comme Recommandations ISO; maintenant, ces documents sont en cours de
transformation en Normes Internationales. Compte tenu de cette procédure, le
Comité Technique ISO/TC 101 a examiné la Recommandation ISO/R 1049 et est
d’avis qu’elle peut, du point de vue technique, être transformée en Norme
Internationale. La présente Norme Internationale remplace donc la
Recommandation ISO/R 1049-1969 à laquelle elle est techniquement identique.
La Recommandation lSO/R 1049 avait été approuvée par les Comités Membres des
pays suivants :
Afrique du Sud, Rép. d’ France Suède
Allemagne Grèce
Suisse
Belgique Inde
Tchécoslovaquie
Brésil Israël
Turquie
Canada Italie U.R.S.S.
Chili Japon Yougoslavie
Égypte, Rép. arabe d’ Pays-Bas
Finlande Royaume-Uni
Le Comité Membre du pays suivant avait désapprouvé la Recommandation pour des
raisons techniques :
U.S.A.
Aucun Comité Membre n’a désapprouvé la transformation de la Recommandation
lSO/R 1049 en Norme Internationale.
0 Organisation Internationale de Normalisation, 1975 l
Imprimé en Suisse
NORME INTERNATIONALE 60 1049-1975 (
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...