SIST EN IEC 60730-2-14:2025
(Main)Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
IEC 60730-2-14: 2025 applies to automatic electric actuators
• for use in, on, or in association with equipment for household appliance and similar use;
NOTE 1 Throughout this document, the word "equipment" means "appliance and equipment" and "control" means "electric actuator".
EXAMPLE 1 Electric actuators for appliances within the scope of IEC 60335.
• for building automation within the scope of ISO 16484 series and IEC 63044 series (HBES/BACS);
EXAMPLE 2 Independently mounted electric actuators for use in smart grid systems and for building automation systems within the scope of ISO 16484-2.
for equipment that is used by the public, such as equipment intended to be used in shops, offices, hospitals, farms and commercial and industrial applications;
EXAMPLE 3 Electric actuators for commercial catering, heating, and air-conditioning equipment.
• that are smart enabled;
• that are AC or DC powered electric actuators with a rated voltage not exceeding 690 V AC or 600 V DC;
• used in, on, or in association with equipment that use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof;
• utilized as part of a control system or controls which are mechanically integral with multifunctional controls having non-electrical outputs;
• using NTC or PTC thermistors and to discrete thermistors, requirements for which are contained in Annex J;
• that are mechanically or electrically operated, responsive to or controlling such characteristics as temperature, pressure, passage of time, humidity, light, electrostatic effects, flow, or liquid level, current, voltage, acceleration, or combinations thereof; as well as manual controls when such are electrically and/or mechanically integral with automatic controls.
NOTE 2 Requirements for manually actuated mechanical switches not forming part of an automatic control are contained in IEC 61058-1-1.
This document applies to
– the inherent safety of automatic electric actuators, and
– functional safety of automatic electric actuators and safety related systems,
– controls where the performance (for example the effect of EMC phenomena) of the product can impair the overall safety and performance of the controlled system,
– the operating values, operating times, and operating sequences where such are associated with equipment safety.
This document specifies the requirements for construction, operation and testing of automatic electric actuators used in, on, or in association with an equipment.
This document does not
• apply to automatic electric actuators intended exclusively for industrial process applications unless explicitly mentioned in the relevant part 2 or the equipment standard. However, this document can be applied to evaluate automatic electric actuators intended specifically for industrial applications in cases where no relevant safety standard exists;
• take into account the response value of an automatic action of an electric actuator, if such a response value is dependent upon the method of mounting the electric actuator in the equipment. Where a response value is of significant purpose for the protection of the user, or surroundings, the value defined in the appropriate equipment standard or as determined by the manufacturer will apply;
• address the integrity of the output signal to the network devices, such as interoperability with other devices unless it has been evaluated as part of the control syst
Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche Anwendungen - Teil 2-14: Besondere Anforderungen an elektrische Stellantriebe
Dispositifs de commande électrique automatiques - Partie 2-14: Exigences particulières pour les actionneurs électriques
IEC 60730-2-14: 2025 s'applique aux actionneurs électriques
• utilisés dans, sur ou avec des matériels pour appareils électrodomestiques et à usage analogue;
NOTE 1 Dans le présent document, le terme "matériel" signifie "appareil et matériel" et "dispositif de commande" signifie "actionneur électrique".
EXEMPLE 1 Les actionneurs électriques pour appareils qui relèvent du domaine d'application de l'IEC 60335.
• pour l'automatisation des bâtiments qui relèvent du domaine d'application de la série ISO 16484 et de celui de la série IEC 63044 (HBES/BACS);
EXEMPLE 2 Les actionneurs électriques à montage indépendant pour les systèmes de ventilation et de climatisation (HVAC).
• des matériels utilisés par le public, tels que les matériels destinés à être utilisés dans des magasins, des bureaux, des hôpitaux, des fermes et des applications commerciales et industrielles;
EXEMPLE 3 Les actionneurs électriques pour les installations de restauration, de chauffage et d'air conditionné.
• activés intelligents;
• qui sont des actionneurs électriques à courant alternatif ou continu dont la tension assignée ne dépasse pas 690 V en courant alternatif et 600 V en courant continu;
• qui sont utilisés dans, sur ou avec des matériels qui utilisent l'électricité, le gaz, le pétrole, des combustibles solides, l'énergie thermique solaire, etc. ou une combinaison de ces sources d'énergie;
• qui sont utilisés dans le cadre d'un système de commande ou de dispositifs de commande qui sont mécaniquement intégrés à des dispositifs de commande multifonctions comportant des sorties non électriques;
• qui utilisent des thermistances CTP ou CTN ainsi qu'aux dispositifs à thermistances discrètes, dont les exigences sont fournies à l'Annexe J;
• à commande mécanique ou électrique, qui réagissent à des caractéristiques telles que la température, la pression, le passage du temps, l'humidité, la lumière, les effets électrostatiques, le débit ou le niveau d'un liquide, le courant, la tension, l'accélération, ou une combinaison de ces caractéristiques, ou qui les régulent;
• ainsi qu'aux dispositifs de commande manuels qui sont électriquement et/ou mécaniquement intégrés à des dispositifs de commande automatique.
NOTE 2 Les exigences relatives aux interrupteurs mécaniques à action manuelle qui ne font pas partie d'un dispositif de commande automatique sont contenues dans l'IEC 61058-1-1.
Le présent document s'applique:
– à la sécurité intrinsèque des actionneurs électriques automatiques; et
– à la sécurité fonctionnelle des actionneurs électriques automatiques et des systèmes de sécurité;
– aux dispositifs de commande pour lesquels les performances (par exemple, l'effet des phénomènes CEM) du produit peuvent compromettre la sécurité et les performances globales du système commandé;
– aux valeurs de fonctionnement, aux temps de fonctionnement et aux séquences de fonctionnement lorsque ces éléments interviennent dans la sécurité du matériel.
Le présent document spécifie les exigences relatives à la construction, au fonctionnement et aux essais des actionneurs électriques automatiques utilisés dans, sur ou avec du matériel.
Le présent document:
• ne s'applique pas aux actionneurs électriques automatiques destinés exclusivement à des applications de processus industriels, sauf mention particulière dans la partie 2 applicable ou la
Avtomatske električne krmilne naprave - 2-14. del: Posebne zahteve za električna prožila
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2025
Nadomešča:
SIST EN IEC 60730-2-14:2019
SIST EN IEC 60730-2-14:2019/A1:2024
SIST EN IEC 60730-2-14:2019/A2:2022
Avtomatske električne krmilne naprave - 2-14. del: Posebne zahteve za električna
prožila
Automatic electrical controls - Part 2-14: Particular requirements for electric actuators
Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche
Anwendungen - Teil 2-14: Besondere Anforderungen an elektrische Stellantriebe
Dispositifs de commande électrique automatiques - Partie 2-14: Exigences particulières
pour les actionneurs électriques
Ta slovenski standard je istoveten z: EN IEC 60730-2-14:2025
ICS:
29.120.01 Električna dodatna oprema Electrical accessories in
na splošno general
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60730-2-14
NORME EUROPÉENNE
EUROPÄISCHE NORM June 2025
ICS 29.120.01; 97.120 Supersedes EN IEC 60730-2-14:2019; EN IEC 60730-2-
14:2019/A2:2021; EN IEC 60730-2-14:2019/A1:2022
English Version
Automatic electrical controls - Part 2-14: Particular requirements
for electric actuators
(IEC 60730-2-14:2025)
Dispositifs de commande électrique automatiques - Automatische elektrische Regel- und Steuergeräte für den
Partie 2-14: Exigences particulières pour les actionneurs Hausgebrauch und ähnliche Anwendungen - Teil 2-14:
électriques Besondere Anforderungen an elektrische Stellantriebe
(IEC 60730-2-14:2025) (IEC 60730-2-14:2025)
This European Standard was approved by CENELEC on 2025-05-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60730-2-14:2025 E
European foreword
The text of document 72/1476/FDIS, future edition 3 of IEC 60730-2-14, prepared by TC 72
"Automatic electrical controls" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60730-2-14:2025.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-06-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-06-30
document have to be withdrawn
This document supersedes EN IEC 60730-2-14:2019 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60730-2-14:2025 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60034 (series) NOTE Approved as EN IEC 60034 (series)
IEC 60730-2-8 NOTE Approved as EN IEC 60730-2-8
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Annex ZA of Part 1 is applicable except as follows.
Addition:
Publication Year Title EN/HD Year
IEC 60730-1 2022 Automatic electrical controls - Part 1: General EN IEC 60730-1 2024
requirements
+ A11 2024
IEC 60730-2-14 ®
Edition 3.0 2025-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Automatic electrical controls –
Part 2-14: Particular requirements for electric actuators
Dispositifs de commande électrique automatiques –
Partie 2-14: Exigences particulières pour les actionneurs électriques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.01, 97.120 ISBN 978-2-8327-0339-7
– 2 – IEC 60730-2-14:2025 © IEC 2025
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 6
3.2 Definitions of types of control according to purpose . 6
3.3 Definitions relating to the function of controls . 6
4 General . 7
5 Required technical information . 7
5.2 Methods of providing technical information . 7
5.3 Class II symbol . 9
6 Protection against electric shock . 9
7 Provision for protective earthing . 9
8 Terminals and terminations . 9
9 Constructional requirements . 10
10 Threaded parts and connections . 10
11 Creepage distances, clearances and distances through solid insulation . 10
12 Components . 10
13 Fault assessment on electronic circuits . 10
13.1 Fault assessment for inherent safety . 10
14 Moisture and dust resistance . 10
15 Electric strength and insulation resistance . 11
16 Heating . 11
17 Manufacturing deviation and drift . 12
18 Environmental stress. 12
19 Endurance . 12
20 Mechanical strength . 13
21 Resistance to heat, fire and tracking . 13
22 Resistance to corrosion . 13
23 Electromagnetic compatibility (EMC) requirements – Emission . 13
24 Normal operation . 13
25 Electromagnetic compatibility (EMC) requirements – Immunity . 13
25.1 General . 13
26 Abnormal operation tests . 13
26.1 Abnormal temperature test . 13
Annex H (normative) Requirements related to functional safety . 17
Annex R (informative) National differences relevant in the United States of America . 23
Annex S (informative) National differences relevant in Japan . 24
Annex T (informative) National differences relevant in Canada . 25
Bibliography . 26
Table 1 – Required technical information and methods of providing these information . 8
IEC 60730-2-14:2025 © IEC 2025 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
AUTOMATIC ELECTRICAL CONTROLS –
Part 2-14: Particular requirements for electric actuators
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normativ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.