Baths - Connecting dimensions

This European Standard specifies requirements for the connecting dimensions of baths, regardless of the material used for their manufacture.
This European Standard applies to baths used for domestic purposes and complements the standards for baths made from different materials, the existing standards on tap ware and waste fittings (EN 200 and EN 274-1) in terms of their dimensional requirements.
NOTE   Only dimensions are compulsory. The shape of the appliance in the figures is for illustration only; it in no way prejudices the shape of the appliance which is left to the initiative of the manufacturer.

Badewannen - Anschlussmaße

Diese Europäische Norm legt die Anforderungen für die Anschlussmaße von Badewannen, unabhängig vom verwendeten Werkstoff für deren Herstellung, fest.
Diese Europäische Norm gilt für Badewannen für den Hausgebrauch und ergänzt die Normen für Badewannen, hergestellt aus verschiedenen Werkstoffen, sowie die bestehenden Normen für Zulaufarmaturen und Ablaufgarnituren (EN 200 und EN 274-1) hinsichtlich ihrer maßlichen Anforderungen.
ANMERKUNG   Nur die angegebenen Maße sind verbindlich. Die in den Bildern dargestellte Form der Gegenstände wurde nur für das bessere Verständnis gewählt. Sie schreibt nicht die endgültige Form der Gegenstände vor, die der Wahl des Herstellers überlassen bleibt.

Baignoires - Cotes de raccordement

La présente norme spécifie les exigences relatives aux cotes de raccordement des baignoires, indépendamment du matériau dont elles sont faites.
La présente Norme européenne s'applique aux baignoires utilisées à des fins domestiques et complète les normes relatives aux baignoires faites à partir de différents matériaux ainsi que les normes existantes sur la robinetterie et les dispositifs de vidage (EN 200 et EN 274-1) en matière de prescriptions dimensionnelles.
NOTE   Seules les dimensions des parties cotées doivent être respectées. La forme des appareils représentés sur les figures est donnée uniquement à titre d’illustration ; elle ne laisse aucunement présager de la forme définitive de l'appareil qui est laissée à l'initiative des fabricants.

Kopalne kadi - Priključne mere

Ta standard določa zahteve za priključne mere za kadi za prhanje, ne glede na material, uporabljen za njihovo proizvodnjo.

General Information

Status
Published
Public Enquiry End Date
14-May-2011
Publication Date
03-Apr-2013
ICS
91.140.70 - Sanitary installations
Technical Committee
IOVO - Water supply and waste water engineering
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
26-Mar-2013
Due Date
31-May-2013
Completion Date
04-Apr-2013
Ref Project
EN 232:2012 - Baths - Connecting dimensions

Relations

Replaces
SIST EN 232:2003 - Baths - Connecting dimensions
Effective Date
01-May-2013
Revised
SIST EN 232:2003 - Baths - Connecting dimensions
Effective Date
08-Aug-2009

Overview

SIST EN 232:2013 is a European standard developed by CEN that specifies the connecting dimensions of baths used for domestic purposes. This standard applies to baths regardless of the material used in their manufacture and ensures compatibility with other relevant standards, including those for tapware (EN 200) and waste fittings (EN 274-1). Its primary focus is on the dimensional requirements for bath fittings, such as waste outlet holes, overflow holes, and tap mounting areas. The standard is essential for manufacturers, designers, and installers in the sanitary appliance industry, promoting interoperability and ease of installation across European markets.

Key Topics

  • Basic Dimensions: Defines essential measurements such as vertical and horizontal distances between overflow holes and waste outlet holes, height from the floor to the waste outlet, and clearance requirements to ensure compatibility with waste fittings compliant with EN 274-1.

  • Waste Outlet Hole Dimensions: Specifies the diameter, contact diameter, sealing surfaces, and angles for waste outlet openings to accommodate standardized waste fittings.

  • Clearance Requirements: Details the necessary free space around the waste outlet and overflow holes for the installation of fittings, along with reinforcement thickness limits.

  • Overflow Hole Requirements: Covers dimensions, clearances, and material thickness for overflow holes, including flat areas for gasket placement and fitting accommodation.

  • Tap Hole Specifications: Specifies position, number, and dimensions of flat areas and clearances for rim-mounted and deck-mounted tapware, allowing flexibility in design while ensuring functional installation.

  • Control Gauge Testing: Provides guidelines on test apparatus and acceptance criteria for verifying the fit of control gauges in waste outlet holes, ensuring dimensional conformity.

Applications

  • Bathroom Fixture Design: Bath manufacturers use SIST EN 232:2013 to design baths with standardized connecting dimensions to ensure compatibility with taps, waste fittings, and overflow assemblies.

  • Sanitary Installation: Installers benefit from consistency in bath dimensions, facilitating quick and reliable installation of plumbing fixtures without the need for customization.

  • Quality Assurance: Standards compliance supports quality control in production, reducing defects related to misaligned or incompatible fittings.

  • Regulatory Compliance: Manufacturers across the European Union and participating CEN member countries are required to comply with SIST EN 232:2013, supporting regulatory approval and market access.

  • Interoperability: EN 232 helps harmonize bath fittings across different materials and manufacturers, enabling easier integration with existing plumbing systems and parts from various suppliers.

Related Standards

  • EN 274-1: Waste fittings for sanitary appliances – Part 1: Requirements. SIST EN 232:2013 aligns with this standard for waste outlet hole compatibility.

  • EN 200: Tapware standards governing the design and testing of taps used in conjunction with bath applications.

  • CEN/TC 163: The technical committee responsible for standardization in sanitary appliances, under which this standard is developed.

  • National Standards: SIST EN 232:2013 replaces and harmonizes previous national standards related to bath dimensions in participating European countries, such as SIST EN 232 in Slovenia.

Keywords: SIST EN 232:2013, bath connecting dimensions, European bath standards, sanitary appliances, waste fittings, overflow hole, tap hole dimensions, domestic baths, CEN standards, bath installation compatibility, EN 274-1, plumbing standards, sanitary fixture dimensions.

Frequently Asked Questions

SIST EN 232:2013 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Baths - Connecting dimensions". This standard covers: This European Standard specifies requirements for the connecting dimensions of baths, regardless of the material used for their manufacture. This European Standard applies to baths used for domestic purposes and complements the standards for baths made from different materials, the existing standards on tap ware and waste fittings (EN 200 and EN 274-1) in terms of their dimensional requirements. NOTE Only dimensions are compulsory. The shape of the appliance in the figures is for illustration only; it in no way prejudices the shape of the appliance which is left to the initiative of the manufacturer.

This European Standard specifies requirements for the connecting dimensions of baths, regardless of the material used for their manufacture. This European Standard applies to baths used for domestic purposes and complements the standards for baths made from different materials, the existing standards on tap ware and waste fittings (EN 200 and EN 274-1) in terms of their dimensional requirements. NOTE Only dimensions are compulsory. The shape of the appliance in the figures is for illustration only; it in no way prejudices the shape of the appliance which is left to the initiative of the manufacturer.

SIST EN 232:2013 is classified under the following ICS (International Classification for Standards) categories: 91.140.70 - Sanitary installations. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 232:2013 has the following relationships with other standards: It is inter standard links to SIST EN 232:2003, SIST EN 232:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

You can purchase SIST EN 232:2013 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Badewannen - AnschlussmaßeBaignoires - Cotes de raccordementBaths - Connecting dimensions91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 232:2012SIST EN 232:2013en,fr,de01-maj-2013SIST EN 232:2013SLOVENSKI
STANDARDSIST EN 232:20031DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 232
October 2012 ICS 91.140.70 Supersedes EN 232:2003English Version
Baths - Connecting dimensions
Baignoires - Cotes de raccordement
Badewannen - Anschlussmaße This European Standard was approved by CEN on 18 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 232:2012: ESIST EN 232:2013

Determination of dimensions . 10A.1 Test apparatus . 10A.2 Determination of the fit of the control gauge in the waste outlet hole . 11 SIST EN 232:2013

1 Scope This European Standard specifies requirements for the connecting dimensions of baths, regardless of the material used for their manufacture. This European Standard applies to baths used for domestic purposes and complements the standards for baths made from different materials, the existing standards on tap ware and waste fittings (EN 200 and EN 274-1) in terms of their dimensional requirements. NOTE Only dimensions are compulsory. The shape of the appliance in the figures is for illustration only; it in no way prejudices the shape of the appliance which is left to the initiative of the manufacturer. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 274-1, Waste fittings for sanitary appliances – Part 1: Requirements 3 Connecting dimensions 3.1 Basic dimensions The basic dimensions H, a, H1 and h1 shall comply with Tab
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...