SIST EN 60512-26-100:2008/A1:2011
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (IEC 60512-26-100:2008/A1:2011)
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (IEC 60512-26-100:2008/A1:2011)
This part of IEC 60512 specifies the test and measurements and the related measurement setup and reference arrangements for interoperability and backward compatibility tests for the development and qualification of 8-way, free and fixed connectors for data transmission.
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 26-100: Messaufbau, Prüf- und Referenzanordnung und Messverfahren für Steckverbinder nach IEC 60603-7 - Prüfungen 26a bis 26g (IEC 60512-26-100:2008/A1:2011)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 26-100: Montage de mesure, dispositifs d'essai et de référence et mesures pour les connecteurs conformes à la CEI 60603-7 - Essais 26a à 26g (CEI 60512-26-100:2008/A1:2011)
Konektorji za elektronsko opremo - Preskušanje in meritve - 26-100. del: Merilna postavitev, določitev preskusov in referenc ter meritve konektorjev v skladu z IEC 60603-7 - Preskusi od 26a do 26g - Dopolnilo A1 (IEC 60512-26-100:2008/A1:2011)
Ta del IEC 60512 določa preskušanje in meritve ter z njimi povezano merilno postavitev in reference za interoperabilnost in preskuse vzvratne združljivosti za razvoj in kvalifikacije 8-smernih, prostih ali fiksnih konektorjev za prenos podatkov.
General Information
- Status
- Published
- Publication Date
- 09-May-2011
- Technical Committee
- I11 - Imaginarni 11
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 26-Apr-2011
- Due Date
- 01-Jul-2011
- Completion Date
- 10-May-2011
Relations
- Effective Date
- 01-Jun-2011
Overview
EN 60512-26-100:2008/A1:2011 amends the European adoption of IEC 60512-26-100 and defines measurement setup, test and reference arrangements and measurements for connectors that comply with IEC 60603-7. This part (Tests 26a–26g) provides procedures and clarified requirements for impedance and transfer measurements, test-fixture configuration and terminating loads used during connector electrical testing. The amendment was approved by CENELEC in April 2011.
Key Topics
- Measurement setups: Defines recommended arrangements including triaxial set-ups and the use of a metallic tube for outer-circuit measurements.
- Terminating loads: Specifies that inner and outer circuit terminating resistances are chosen to be within ±2% of the measured circuit impedances and that standard-value resistors may be used to achieve the required values.
- Impedance determination: Inner and outer circuit impedances are determined from dedicated short‑circuit and open‑circuit measurements on prepared samples (clauses 4.5.4.3.1–3). Measurements are taken with a calibrated network analyzer or equivalent impedance-measurement system at the appropriate reference planes.
- Test frequency selection: Test frequency is chosen relative to sample length and wavelength so the measurement is representative of the connector’s electrical behavior at the intended test condition.
- Practical measurement guidance: The amendment clarifies procedures for preparing samples, holding samples within metallic tubes (using low-dielectric supports), and connecting measurement equipment for accurate results.
Applications
This standard amendment is essential for professionals who need reliable, repeatable electrical characterization of connectors:
- Connector manufacturers - for product development, quality control and compliance testing to IEC 60603-7.
- Test laboratories - to set up standardized measurement rigs and ensure traceable impedance/transfer measurements.
- Design and compliance engineers - to specify test methods, terminating loads and measurement references when validating connector performance.
- Procurement and certification bodies - to evaluate test reports and confirm adherence to EN/IEC procedures.
Related Standards
- IEC 60512 series (Tests and measurements for connectors)
- IEC 60603-7 (the connector family referenced by this part)
- National adoptions and CENELEC documents (EN 60512-26-100:2008 and its amendment A1)
Keywords: EN 60512-26-100:2008/A1:2011, connectors, tests and measurements, IEC 60603-7, impedance measurement, triaxial setup, network analyzer, terminating loads, transfer impedance.
Frequently Asked Questions
SIST EN 60512-26-100:2008/A1:2011 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (IEC 60512-26-100:2008/A1:2011)". This standard covers: This part of IEC 60512 specifies the test and measurements and the related measurement setup and reference arrangements for interoperability and backward compatibility tests for the development and qualification of 8-way, free and fixed connectors for data transmission.
This part of IEC 60512 specifies the test and measurements and the related measurement setup and reference arrangements for interoperability and backward compatibility tests for the development and qualification of 8-way, free and fixed connectors for data transmission.
SIST EN 60512-26-100:2008/A1:2011 is classified under the following ICS (International Classification for Standards) categories: 31.220.10 - Plug-and-socket devices. Connectors. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 60512-26-100:2008/A1:2011 has the following relationships with other standards: It is inter standard links to SIST EN 60512-26-100:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 60512-26-100:2008/A1:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2011
.RQHNWRUML]DHOHNWURQVNRRSUHPR3UHVNXãDQMHLQPHULWYHGHO 0HULOQD
SRVWDYLWHYGRORþLWHYSUHVNXVRYLQUHIHUHQFWHUPHULWYHNRQHNWRUMHYYVNODGX],(&
3UHVNXVLRGDGRJ'RSROQLOR$ ,(& $
Connectors for electronic equipment - Tests and measurements - Part 26-100:
Measurement setup, test and reference arrangements and measurements for connectors
according to IEC 60603-7 - Tests 26a to 26g (IEC 60512-26-100:2008/A1:2011)
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 26-100:
Messaufbau, Prüf- und Referenzanordnung und Messverfahren für Steckverbinder nach
IEC 60603-7 - Prüfungen 26a bis 26g (IEC 60512-26-100:2008/A1:2011)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 26-100:
Montage de mesure, dispositifs d'essai et de référence et mesures pour les connecteurs
conformes à la CEI 60603-7 - Essais 26a à 26g (CEI 60512-26-100:2008/A1:2011)
Ta slovenski standard je istoveten z: EN 60512-26-100:2008/A1:2011
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60512-26-100/A1
NORME EUROPÉENNE
April 2011
EUROPÄISCHE NORM
ICS 13.220.10
English version
Connectors for electronic equipment -
Tests and measurements -
Part 26-100: Measurement setup, test and reference arrangements and
measurements for connectors according to IEC 60603-7 -
Tests 26a to 26g
(IEC 60512-26-100:2008/A1:2011)
Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Essais et mesures - Mess- und Prüfverfahren -
Partie 26-100: Montage de mesure, Teil 26-100: Messaufbau, Prüf- und
dispositifs d'essai et de référence et Referenzanordnung und Messverfahren
mesures pour les connecteurs conformes für Steckverbinder nach IEC 60603-7 -
à la CEI 60603-7 - Prüfungen 26a bis 26g
Essais 26a à 26g (IEC 60512-26-100:2008/A1:2011)
(CEI 60512-26-100:2008/A1:2011)
This amendment A1 modifies the European Standard EN 60512-26-100:2008; it was approved by CENELEC on
2011-04-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-26-100:2008/A1:2011 E
Foreword
The text of document 48B/2065/CDV, future amendment 1 to IEC 60512-26-100:2008, prepared by
SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for
electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as amendment A1 to EN 60512-26-100:2008 on 2011-04-18.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2012-01-18
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2014-04-18
__________
Endorsement notice
The text of amendment 1:2011 to the International Standard IEC 60512-26-100:2008 was approved by
CENELEC as an amendment to the European Standard without any modification.
__________
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...