Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)

This part of ISO 286 establishes the ISO code system for tolerances to be used for linear sizes of features of the following types: a) cylinder; b) two parallel opposite surfaces. It defines the basic concepts and the related terminology for this code system. It provides a standardized selection of tolerance classes for general purposes from amongst the numerous possibilities. Additionally, it defines the basic terminology for fits between two features of size without constraints of orientation and location and explains the principles of “basic hole” and “basic shaft”.

Geometrische Produktspezifikation (GPS) - ISO-Toleranzsystem für Längenmaße - Teil 1: Grundlagen für Toleranzen, Abmaße und Passungen (ISO 286-1:2010/Cor 1:2013)

Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 1: Base des tolérances, écarts et ajustements - Rectificatif technique 1 (ISO 286-1:2010/Cor 1:2013)

Specifikacija geometrijskih veličin izdelka - Tolerančni sistem ISO za dolžinske mere - 1. del: Osnova za tolerance, odstopanja in ujeme (ISO 286-1:2010/Cor 1:2013)

Ta del ISO 286 vzpostavlja tolerančni sistem ISO za uporabo za dolžinske mere oblik naslednjih vrst: a) valj; b) dve vzporedni nasprotni površini. Določa osnovne koncepte in povezano terminologijo za ta kodni sistem. Zagotavlja standardiziran izbor tolerančnih razredov za splošne namene izmed vseh številnih možnosti. Poleg tega definira osnovno terminologijo za ujeme med dvema oblikama velikosti, brez omejitev glede usmerjenosti in lokacije, ter pojasnjuje načela »osnovne odprtine« in »osnovne palice«.

General Information

Status
Published
Publication Date
15-May-2014
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
13-May-2014
Due Date
18-Jul-2014
Completion Date
16-May-2014

Relations

Buy Standard

Corrigendum
EN ISO 286-1:2010/AC:2014
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.&RUGeometrische Produktspezifikation (GPS) - ISO-Toleranzsystem für Längenmaße - Teil 1: Grundlagen für Toleranzen, Abmaße und Passungen
(ISO 286-1:2010/Cor 1:2013)Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 1: Base des tolérances, écarts et ajustements - Rectificatif technique 1 (ISO 286-1:2010/Cor 1:2013)Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)17.040.40Geometrical Product Specification (GPS)17.040.10Tolerance in ujemiLimits and fitsICS:Ta slovenski standard je istoveten z:EN ISO 286-1:2010/AC:2013SIST EN ISO 286-1:2010/AC:2014en01-julij-2014SIST EN ISO 286-1:2010/AC:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 286-1:2010/AC
August 2013
Août 2013
August 2013 ICS 17.040.10 English version Version Française Deutsche Fassung
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 1: Base des tolérances, écarts et ajustements - Rectificatif technique 1 (ISO 286-1:2010/Cor 1:2013)
Geometrische Produktspezifikation (GPS) -ISO-Toleranzsystem für Längenmaße - Teil 1: Grundlagen für Toleranzen, Abmaße und Passungen
(ISO 286-1:2010/Cor 1:2013)This corrigendum becomes effective on 7 August 2013 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 7 août 2013 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 7. August 2013 zur Einarbeitung in die drei offiziellen Sprachfassungen der EN in Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier aux membres nationaux du CEN. Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten. Ref. No.:EN ISO 286-1:2010/AC:2013 D/E/FSIST EN ISO 286-1:2010/AC:2014

Page Foreword .3
INTERNATIONAL STANDARD ISO 286-1:2010 TECHNICAL CORRIGENDUM 1 Published 2013-08-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 
 ORGANISATION INTERNATIONALE DE NORMALISATION
Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes
— Part 1: Basis of tolerances, deviations and fits TECHNICAL CORRIGENDUM 1 Spécification géométrique des produits (GPS) — Système de codification ISO pour les tolérances sur les tailles linéaires — Partie 1: Base des tolér
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.