SIST EN 61076-7-100:2007

SLOVENSKI STANDARD
01-januar-2007
.RQHNWRUML]DXSRUDERYHQRVPHUQLKQL]NRIUHNYHQþQLKDQDORJQLKLQGLJLWDOQLK
YLVRNRKLWURVWQLKSRGDWNRYQLKDSOLNDFLMDKGHO3UDYRNRWQLNRQHNWRUML]
RFHQMHQRNDNRYRVWMR3RGUREQDVSHFLILNDFLMD]DYUVWR]DVORQMHQLKNRQHNWRUMHYV
WUDSH]RLGQRREOLNRYDQLPLãNROMNDPLLQQHRGVWUDQOMLYLPLGYRUHGQLPLWUDþQLPL
NRQWDNWLYUDVWUXPP,(&
Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet
accessories - Detail specification for a metric cable sealing consisting of an integrated
part of heavy-duty rectangular or circular connector hoods and a sealing system
Steckverbinder fr elektronische Einrichtungen - Produktanforderungen - Teil 7-100:
Kabelausgangszubehr - Bauartspezifikation fr eine metrische Kabelabdichtung
bestehend aus einem integrierten Teil von stark beanspruchbaren
Steckverbinderhaubengehusen oder Rundsteckverbindergehusen und einem
Dichtungssystem
Connecteurs pour quipements lctroniques - Exigences de produit - Partie 7-100:
Accessoires de sorties de cbles - Spcification particulire pour un presse-toupe mtrique
constitu d'une partie intgre de capots de connecteurs rectangulaires ou circulaires haut
rendement et d'un systme d'tanchit pour conditions svres
Ta slovenski standard je istoveten z: EN 61076-7-100:2006
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61076-7-100
NORME EUROPÉENNE
July 2006
EUROPÄISCHE NORM
ICS 31.220.10
English version
Connectors for electronic equipment -
Product requirements
Part 7-100: Cable outlet accessories -
Detail specification for a metric cable sealing
consisting of an integrated part of heavy-duty rectangular
or circular connector hoods and a sealing system
(IEC 61076-7-100:2006)
Connecteurs pour équipements Steckverbinder für elektronische
éléctroniques - Exigences de produit Einrichtungen - Produktanforderungen
Partie 7-100: Accessoires de sorties Teil 7-100: Kabelausgangszubehör -
de câbles - Bauartspezifikation für eine metrische
Spécification particulière pour Kabelabdichtung bestehend aus einem
un presse-étoupe métrique constitué integrierten Teil von stark beanspruchbaren
d'une partie intégrée de capots de Steckverbinderhaubengehäusen oder
connecteurs rectangulaires ou circulaires Rundsteckverbindergehäusen und
à haut rendement et d'un système einem Dichtungssystem
d'étanchéité pour conditions sévères (IEC 61076-7-100:2006)
(CEI 61076-7-100:2006)
This European Standard was approved by CENELEC on 2006-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61076-7-100:2006 E

Foreword
The text of document 48B/1652/FDIS, future edition 1 of IEC 61076-7-100, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61076-7-100 on 2006-07-01.
This Standard is to be used in conjunction with EN 61076-7.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61076-7-100:2006 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61076-7-100:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050-581 1978 International Electrotechnical Vocabulary - -
(IEV) -
Chapter 581: Electromechanical components
for electronic equipment
IEC 60068-1 1988 Environmental testing
+ corr. October 1988 Part 1: General and guidance
+ A1 1992 EN 60068-1 1994
IEC 60423 (mod) 1993 Conduits for electrical purposes - Outside EN 60423 1994
diameters of conduits for electrical
installations and threads for conduits and
fittings
IEC 60512 Series Connectors for electronic equipment - Tests EN 60512 Series
and measurements
1) 2)
IEC 60512-1 - Connectors for electronic equipment - Tests EN 60512-1 2001
and measurements
Part 1: General
IEC 60529 1989 Degrees of protection provided by enclosures EN 60529 1991
(IP Code) + corr. May 1993
1) 2)
IEC 61076-1 - Connectors for electronic equipment - EN 61076-1 2006
Product requirements
Part 1: Generic specification
IEC 61076-7 2000 Connectors for use in d.c., low-frequency EN 61076-7 2000
analogue and digital high speed data
applications
Part 7: Cable outlet accessories with
assessed quality, including qualification and
capability approval - Sectional specification

ISO 868 2003 Plastics and ebonite - Determination of EN ISO 868 2003
indentation hardness by means of a
durometer (Shore hardness)
1)
Undated reference.
2)
Valid edition at date of issue.

NORME CEI
INTERNATIONALE
IEC
61076-7-100
INTERNATIONAL
Première édition
STANDARD
First edition
2006-05
Connecteurs pour équipements électroniques –
Exigences de produit –
Partie 7-100:
Accessoires de sorties de câbles –
Spécification particulière pour un presse-étoupe
métrique constitué d'une partie intégrée de
capots de connecteurs rectangulaires ou
circulaires et d'un système d'étanchéité
pour conditions sévères
Connectors for electronic equipment –
Product requirements –
Part 7-100:
Cable outlet accessories –
Detail specification for a metric cable sealing
consisting of an integrated part of heavy-duty
rectangular or circular connector hoods and
a sealing system
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
Q
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61076-7-100  IEC:2006 – 3 –
CONTENTS
FOREWORD.7

1 General .13
1.1 Scope.13
1.2 Normative references .13
2 Technical data.15
2.1 Terms and definitions .15
2.2 Materials and plating .15
2.3 Construction.15
2.4 Styles.15
2.5 IEC type designation .17
2.6 Marking .17
3 Dimensional information .17
3.1 General .17
3.2 Isometric view and common features.17
3.3 Dimensions .19
4 Characteristics .23
4.1 Climatic category.23
4.2 Electrical .23
4.3 Mechanical.23
4.4 IP Code in accordance with IEC 60529.23
5 Test schedule.23
5.1 General .23
5.2 Test procedures and measuring methods .23
5.3 Preconditioning .25
5.4 Preparation of specimens .25
5.5 Test schedule.25

Annex A (normative) Cable retention test and excess tightening .29
Annex B (informative) Replacement of Pg threads by metric threads .33

Figure 1 – Isometric view .17
Figure 2 – Dimensions of body for styles A and B .19
Figure 3 – Dimensions of metal pressure ring and seal for styles A and B.19
Figure 4 – Dimensions of the pressure nut for applying the pressure to the ring for
styles A and B.21
Figure A.1 – Typical arrangement for cable retention test .29

Table 1 – Cable outlet styles.15
Table 2 – Dimensions of body for styles A and B .19
Table 3 – Dimensions of metal pressure ring and seal for styles A and B.21
Table 4 – Dimensions of the pressure nut for applying the pressure to the ring for
styles A and B.21

61076-7-100  IEC:2006 – 5 –
Table 5 – Climatic category .23
Table 6 – Test group P .25
Table 7 – Test group AP .25
Table 8 – Test group BP .27
Table A.1 – Cable retention .31
Table B.1 – Recommendation for replacement of Pg by metric threads .33

61076-7-100  IEC:2006 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
PRODUCT REQUIREMENTS –
Part 7-100: Cable outlet accessories –
Detail specification for a metric cable sealing consisting
of an integrated part of heavy-duty rectangular
or circular connector hoods and a sealing system

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arisin
...