SIST EN 60332-2-2:2005

STANDARDPreskusi na električnih kablih in kablih iz optičnih vlaken v požarnih razmerah – 2-2. del: Preskus navpičnega širjenja ognja po posamezni majhni izolirani žici ali kablu – Postopek z difuzijskijskim plamenomTests on electric and optical fibre cables under fire conditions – Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable – Procedure for diffusion flame (IEC 60332-2-2:2004)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 60332-2-2:2005(en)ICS13.220.40; 29.060.20; 33.180.10

EUROPEAN STANDARD
EN 60332-2-2 NORME EUROPÉENNE EUROPÄISCHE NORM
November 2004 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60332-2-2:2004 E
ICS 13.220.40; 29.020; 29.060.20 Supersedes EN 50265-2-2:1998
English version
Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation
for a single small insulated wire or cable -
Procedure for diffusion flame (IEC 60332-2-2:2004)
Essais des câbles électriques
et à fibres optiques soumis au feu Partie 2-2: Essai de propagation verticale de la flamme sur conducteur
ou câble isolé de petite section - Procédure pour une flamme
de type à diffusion (CEI 60332-2-2:2004)
Prüfungen an Kabeln, isolierten Leitungen und Glasfaserkabeln im Brandfall Teil 2-2: Prüfung der vertikalen Flammenausbreitung an einer kleinen Ader, einer kleinen isolierten Leitung
oder einem kleinen Kabel -
Prüfverfahren mit leuchtender Flamme (IEC 60332-2-2:2004)
This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

at national level by publication of an identical
national standard or by endorsement
(dop)
2005-06-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2007-09-01 Annex ZA has been added by CENELEC __________ Endorsement notice The text of the International Standard IEC 60332-2-2:2004 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60332-1-2 NOTE Harmonized as EN 60332-1-2:2004 (not modified). __________

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60332-2-1 - 1) Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable – Apparatus
EN 60332-2-1 2004 2) IEC 60695-4 - 1) Fire hazard testing Part 4: Terminology concerning fire tests
EN 60695-4 1995 2) IEC Guide 104 - 1) The preparation of safety publications and the use of basic safety publications and group safety publications
- -
1) Undated reference.
2) Valid edition at date of issue.

NORME INTERNATIONALECEIIECINTERNATIONALSTANDARD 60332-2-2Première éditionFirst edition2004-07Essais des câbles électriques
et à fibres optiques soumis au feu – Partie 2-2: Essai de propagation verticale de la flamme sur conducteur ou câble isolé de petite section–Procédure pour une flamme de type à diffusion Tests on electric and optical fibre cables under fire conditions – Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable – Procedure for diffusion flame Pour prix, voir catalogue en vigueur For price, see current catalogue© IEC 2004
Droits de reproduction réservés
⎯
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photo-copie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.chCommission Electrotechnique InternationaleInternational Electrotechnical CommissionNCODE PRIX PRICE CODE PUBLICATION GROUPÉE DE SÉCURITÉ
GROUP SAFETY PUBLICATION
60332-2-2 © IEC:2004 – 3 –
CONTENTS FOREWORD.5 1 Scope.9 2 Normative references.9 3 Terms and definitions.11 4 Test apparatus.115 Procedure.11 5.1 Sample.11 5.2 Conditioning.11 5.3 Positioning of test piece.11 5.4 Flame application.13 6 Evaluation of test results.15 Annex A (informative)
Recommended performance requirements.25 Bibliography.27

60332-2-2 © IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES
UNDER FIRE CONDITIONS –Part 2-2: Test for vertical flame propagation
for a single small insulated wire or cable –
Procedure for diffusion flame FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60332-2
...