Electrical energy meters - Test equipment, techniques and procedures - Part 3: Automatic meter testing system (AMTS)

IEC 62057-3:2024 applies to an automatic meter testing system (AMTS) permanently installed in a controlled environment. It covers the functions, technical requirements and acceptance methods of an AMTS. It also applies to a newly manufactured AMTS to test static active or reactive energy meters on 50 Hz or 60 Hz networks with an AC voltage up to 600 V (phase to neutral).
This document defines the kind of AMTS that can continuously and automatically carry out all the test items specified in IEC 62058-31, including visual inspection, AC voltage test, no-load condition, starting current, accuracy and meter constant test.
This document does not apply to:
• data interfaces to the meter and test procedures of data interface;
• industrial controllers, industrial personal computers, and servers supplied along with the AMTS.

Prüfgeräte, Techniken und Verfahren für elektrische Energiezähler – Teil 3: Automatisches Zählerprüfsystem (AMTS)

Compteurs d'énergie électrique - Équipement, techniques et procédures d'essai - Partie 3: Système d'essai automatisé des compteurs d'énergie électrique (AMTS)

IEC 62057-3:2024 s'applique à un système d'essai automatisé des compteurs d'énergie électrique (AMTS, automatic meter testing system) installé en permanence dans un environnement contrôlé. Elle couvre les fonctions, les exigences techniques et les méthodes de réception d’un AMTS. Elle s'applique également aux AMTS neufs destinés aux essais des compteurs statiques d'énergie active ou réactive sur les réseaux de 50 Hz ou 60 Hz avec une tension alternative inférieure ou égale à 600 V (tension entre phase et neutre).
Le présent document définit le type d'AMTS qui peut réaliser en continu et de manière automatique tous les éléments d'essai spécifiés dans l'IEC 62058-31, y compris l'examen visuel, l'essai sous tension alternative, l'essai de condition de marche à vide, l'essai de courant de démarrage, l'essai de précision et l'essai de constante du compteur.
Le présent document ne s’applique pas:
• aux interfaces de communication avec le compteur et aux procédures d'essai de l'interface de communication;
• aux contrôleurs industriels, aux ordinateurs personnels industriels et aux serveurs fournis avec l'AMTS.

Števci električne energije - Merilna oprema, tehnike in postopki - 3. del: Avtomatski preskusni sistem za števce (AMTS)

Standard IEC 62057-3:2024 se uporablja za avtomatski preskusni sistem za števce (AMTS), ki je trajno nameščen v nadzorovanem okolju. Zajema funkcije, tehnične zahteve in metode sprejemljivosti avtomatskega preskusnega sistema za števce. Uporablja se tudi za novo izdelane avtomatske preskusne sisteme za števce za preskušanje statičnih števcev delovne ali jalove električne energije v omrežju 50 Hz ali 60 Hz z izmenično napetostjo do 600 V (fazna napetost).
Ta dokument opredeljuje vrsto avtomatskega preskusnega sistema za števce, ki lahko neprekinjeno in samodejno izvaja vse elemente preskusa, določene v standardu IEC 62058-31, vključno z vizualnim pregledom, preskusom izmenične napetosti, delovanjem brez obremenitve, zagonskim tokom, natančnostjo in preskusom konstante števca.
Ta dokument se ne uporablja za:
• podatkovne vmesnike za števec in njihove preskusne postopke;
• industrijske krmilnike, industrijske osebne računalnike in strežnike, dobavljene skupaj z avtomatskim preskusnim sistemom za števce.

General Information

Status
Published
Public Enquiry End Date
16-Feb-2023
Publication Date
10-Jun-2024
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
06-Jun-2024
Due Date
11-Aug-2024
Completion Date
11-Jun-2024

Buy Standard

Standard
EN IEC 62057-3:2024
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2024
Števci električne energije - Merilna oprema, tehnike in postopki - 3. del:
Avtomatski preskusni sistem za števce (AMTS)
Electrical energy meters - Test equipment, techniques and procedures - Part 3:
Automatic meter testing system (AMTS)
Prüfgeräte, Techniken und Verfahren für elektrische Energiezähler – Teil 3:
Automatisches Zählerprüfsystem (AMTS)
Compteurs d'énergie électrique - Équipement, techniques et procédures d'essai - Partie
3: Système d'essai automatisé des compteurs d'énergie électrique (AMTS)
Ta slovenski standard je istoveten z: EN IEC 62057-3:2024
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62057-3

NORME EUROPÉENNE
EUROPÄISCHE NORM May 2024
ICS 17.220.20
English Version
Electrical energy meters - Test equipment, techniques and
procedures - Part 3: Automatic meter testing system (AMTS)
(IEC 62057-3:2024)
Compteurs d'énergie électrique - Équipement, techniques Elektrische Energiezähler - Prüfgeräte, Techniken und
et procédures d'essai - Partie 3: Système d'essai Verfahren - Teil 3: Automatisches Zählerprüfsystem (AMTS)
automatisé des compteurs d'énergie électrique (AMTS) (IEC 62057-3:2024)
(IEC 62057-3:2024)
This European Standard was approved by CENELEC on 2024-05-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62057-3:2024 E

European foreword
The text of document 13/1916/FDIS, future edition 1 of IEC 62057-3, prepared by IEC/TC 13
"Electrical energy measurement and control" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62057-3:2024.
The following dates are fixed:
latest date by which the document has to be implemented at national level (dop) 2025-02-28
by publication of an identical national standard or by endorsement
latest date by which the national standards conflicting with the (dow) 2027-05-28
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62057-3:2024 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62052-11:2020 NOTE Approved as EN IEC 62052-11:2021 (not modified)

As impacted by EN IEC 62052-11:2021+A11:2022 and EN IEC 62052-11:2021+A12:2024.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60204-1 (mod) 2016 Safety of machinery - Electrical equipment EN 60204-1 2018
of machines - Part 1: General requirements
+ AMD1 2021  + A1 —
IEC 61010-1 2010 Safety requirements for electrical EN 61010-1 2010
equipment for measurement, control, and
laboratory use - Part 1: General
requirements
+ A1 (mod) 2016  + A1 2019
IEC 61140 - Protection against electric shock - EN 61140 -
Common aspects for installation and
equipment
IEC 61180 2016 High-voltage test techniques for low- EN 61180 2016
voltage equipment - Definitions, test and
procedure requirements, test equipment
IEC 61326-1 2020 Electrical equipment for measurement, EN IEC 61326-1 2021
control and laboratory use - EMC
requirements - Part 1: General
requirements
IEC 62052-31 2015 Electricity metering equipment (AC) - EN 62052-31 2016
General requirements, tests and test
conditions - Part 31: Product safety
requirements and tests
IEC 62053-21 2020 Electricity metering equipment - Particular EN IEC 62053-21 2021
requirements - Part 21: Static meters for
AC active energy (classes 0,5, 1 and 2)
- -  + A11 2021
Under preparation. Stage at the time of publication: EN 60204-1:2018/prA1:2020.
IEC 62053-22 2020 Electricity metering equipment - Particular EN IEC 62053-22 2021
requirements - Part 22: Static meters for
AC active energy (classes 0,1S, 0,2S and
0,5S)
- -  + A11 2021
IEC 62053-23 2020 Electricity metering equipment - Particular EN IEC 62053-23 2021
requirements - Part 23: Static meters for
reactive energy (classes 2 and 3)
- -  + A11 2021
IEC 62053-24 2020 Electricity metering equipment - Particular EN IEC 62053-24 2021
requirements - Part 24: Static meters for
fundamental component reactive energy
(classes 0,5S, 1S, 1, 2 and 3)
- -  + A11 2021
IEC 62054-21 2004 Electricity metering (a.c.) - Tariff and load EN 62054-21 2004
control - Part 21: Particular requirements
for time switches
+ AMD1 2017 + A1 2017
IEC 62057-1 2023 Electrical energy meters - Test equipment, EN IEC 62057-1 2023
techniques and procedures - Part 1:
Stationary meter test units (MTUs)
IEC 62058-31 (mod) 2008 Electricity metering equipment (AC) - EN 62058-31 2010
Acceptance inspection - Part 31: Particular
requirements for static meters for active
energy (classes 0,2 S, 0,5 S, 1 and 2)

IEC 62057-3 ®
Edition 1.0 2024-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electrical energy meters – Test equipment, techniques and procedures –

Part 3: Automatic meter testing system (AMTS)

Compteurs d'énergie électrique – Équipement, techniques et procédures d'essai –

Partie 3: Système d'essai automatisé des compteurs d'énergie électrique (AMTS)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.220.20  ISBN 978-2-8322-8553-4

– 2 – IEC 62057-3:2024 © IEC 2024
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 General . 8
5 Functional requirements . 8
5.1 Visual inspection of DUTs . 8
5.2 AC voltage test of DUTs . 8
5.3 Accuracy test of DUTs . 9
5.4 Connection and disconnection . 9
6 Standard electrical values. 9
6.1 Mains supply . 9
6.2 Visual inspection unit . 9
6.3 AC voltage test unit . 9
6.4 AMTU . 9
7 Software requirements . 10
7.1 Application . 10
7.2 Identification . 10
7.3 Protection . 10
7.4 Software functions . 10
7.5 Creation, protection and storage of test programs . 10
7.6 Protection and storage of test results and test protocols . 10
7.7 Documentation of the software . 10
7.8 Software logs . 10
8 Climatic conditions . 11
9 Safety requirements . 11
9.1 Aspects on mounting. 11
9.2 Protection against electric shocks . 11
9.3 Insulation . 11
9.4 Emergency operations . 11
10 Electromagnetic compatibility . 11
10.1 General requirements . 11
10.2 Test conditions . 12
11 Information and marking requirements . 12
12 System acceptance . 12
Bibliography . 13

IEC 62057-3:2024 © IEC 2024 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL ENERGY METERS –
TEST EQUIPMENT, TECHNIQUES AND PROCEDURES –

Part 3: Automatic meter testing system (AMTS)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also pa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.