iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 16272-3-2:2023/oprA1:2024

(Amendment)

Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct sound field applications

Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct sound field applications

This document specifies a normalized railway noise spectrum for the evaluation and assessment of the acoustic performance of devices designed to reduce airborne railway noise near railways.
All noise reducing devices different from noise barriers and related devices acting on airborne sound propagation, e.g. devices for attenuation of ground borne vibration and on board devices are outside of the scope of this document.

Bahnanwendungen - Oberbau - Lärmschutzwände und verwandte Vorrichtungen zur Beeinflussung der Luftschallausbreitung - Prüfverfahren zur Bestimmung der akustischen Eigenschaften - Teil 3¿2: Standardisiertes Schienenverkehrslärmspektrum und Einzahl-Angaben für gerichtete Schallfelder

Applications ferroviaires - Infrastructure - Dispositifs de réduction du bruit - Méthode d'essai pour la détermination de la performance acoustique - Partie 3-2 : Spectre de bruit ferroviaire normalisé et indices uniques d'évaluation pour des applications en champ sonore direct

Železniške naprave - Infrastruktura - Protihrupne ovire in pripadajoče naprave, ki vplivajo na širjenje zvoka v zraku - Preskusna metoda za ugotavljanje akustičnih lastnosti - 3-2. del: Normalizirani spekter železniškega hrupa in enomestne številske stopnje usmerjenega zvočnega polja - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
31-Oct-2024
ICS
17.140.30 - Noise emitted by means of transport
93.100 - Construction of railways
Technical Committee
IŽNP - Reilway applications
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
21-Aug-2024
Due Date
08-Jan-2025
Ref Project
EN 16272-3-2:2023/prA1 - Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct sound field applications

Relations

Amends
SIST EN 16272-3-2:2023 - Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct field applications
Effective Date
23-Apr-2024

Buy Standard

EN 16272-3-2:2023/oprA1:2024EN 16272-3-2:2023/oprA1:2024
PreviousNext
Draft
EN 16272-3-2:2023/oprA1:2024
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2024
Železniške naprave - Infrastruktura - Protihrupne ovire in pripadajoče naprave, ki
vplivajo na širjenje zvoka v zraku - Preskusna metoda za ugotavljanje akustičnih
lastnosti - 3-2. del: Normalizirani spekter železniškega hrupa in enomestne
številske stopnje usmerjenega zvočnega polja - Dopolnilo A1
Railway applications - Infrastructure - Noise barriers and related devices acting on
airborne sound propagation - Test method for determining the acoustic performance -
Part 3-2: Normalized railway noise spectrum and single number ratings for direct sound
field applications
Bahnanwendungen - Oberbau - Lärmschutzwände und verwandte Vorrichtungen zur
Beeinflussung der Luftschallausbreitung - Prüfverfahren zur Bestimmung der
akustischen Eigenschaften - Teil 3¿2: Standardisiertes Schienenverkehrslärmspektrum
und Einzahl-Angaben für gerichtete Schallfelder
Applications ferroviaires - Infrastructure - Dispositifs de réduction du bruit - Méthode
d'essai pour la détermination de la performance acoustique - Partie 3-2 : Spectre de bruit
ferroviaire normalisé et indices uniques d'évaluation pour des applications en champ
sonore direct
Ta slovenski standard je istoveten z: EN 16272-3-2:2023/prA1
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
93.100 Gradnja železnic Construction of railways
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 16272-3-2:2023
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
August 2024
ICS 93.100
English Version
Railway applications - Infrastructure - Noise barriers and
related devices acting on airborne sound propagation -
Test method for determining the acoustic performance -
Part 3-2: Normalized railway noise spectrum and single
number ratings for direct sound field applications
Applications ferroviaires - Infrastructure - Dispositifs Bahnanwendungen - Oberbau - Lärmschutzwände und
de réduction du bruit - Méthode d'essai pour la verwandte Vorrichtungen zur Beeinflussung der
détermination de la performance acoustique - Partie 3- Luftschallausbreitung - Prüfverfahren zur Bestimmung
2 : Spectre de bruit ferroviaire normalisé et indices der akustischen Eigenschaften - Teil 3¿2:
uniques d'évaluation pour des applications en champ Standardisiertes Schienenverkehrslärmspektrum und
sonore direct Einzahl-Angaben für gerichtete Schallfelder
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 16272-3-2:2023. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by tra
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16272-2:2024(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics - Airborne sound insulation under diffuse sound field conditions
EN 16272-2:2023

This document specifies the laboratory method for measuring the airborne sound insulation performance of railway noise barriers in reverberant conditions. It covers the assessment of the intrinsic performance of noise barriers and related devices acting on airborne sound propagation that can reasonably be assembled inside the testing facility described in EN ISO 10140-2 and EN ISO 10140-4.
This method is not intended for the determination of the intrinsic characteristics of airborne sound insulation of noise barriers to be installed on railway in non-reverberant conditions.
All noise reducing devices different from noise barriers and related devices acting on airborne sound propagation, e.g. devices for attenuation of ground borne vibration and on-board devices, are out of the scope of this European standard.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16272-1:2024(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption under diffuse sound field conditions
EN 16272-1:2023

This European Standard specifies the laboratory method for measuring the sound absorption performance of railway noise barriers and related devices acting on airborne sound propagation in reverberant conditions. It covers the assessment of the intrinsic sound absorption performance of devices that can reasonably be assembled inside the testing facility described in EN ISO 354.
This method is not intended for the determination of the intrinsic characteristics of sound absorption of noise barriers and related devices acting on airborne sound propagation to be installed on railways in non-reverberant conditions.
The test method in EN ISO 354 referred to in this European Standard excludes devices that act as weakly damped resonators. Some devices will depart significantly from these requirements and in these cases, care is needed in interpreting the results.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16272-6:2024(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - Airborne sound insulation under direct sound field conditions
EN 16272-6:2023

This European Standard describes a test method for measuring a quantity representative of the intrinsic characteristics of airborne sound insulation for railway noise barriers: the sound insulation index.
The test method is intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise barriers to be installed along railways, to be measured either on typical installations alongside railways or on a relevant sample section;
-   determination of the in situ intrinsic characteristics of airborne sound insulation of noise barriers in actual use;
-   comparison of design specifications with actual performance data after the completion of the construction work;
-   verification of the long term performance of noise barriers (with a repeated application of the method);
-   interactive design process of new products, including the formulation of installation manuals.
The test method is not intended for the following applications:
-   determination of the intrinsic characteristics of airborne sound insulation of noise barriers to be installed in reverberant conditions, e.g. inside tunnels or deep trenches or under covers.
Results are expressed as a function of frequency in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurement results over the whole frequency range indicated, the results will be given in a restricted frequency range and the reasons for the restriction(s) will be clearly reported.
All noise reducing devices different from noise barriers and related devices acting on airborne sound propagation, e.g. devices for attenuation of ground borne vibration and on board devices are out of the scope of this European Standard.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16272-5:2024(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - Sound absorption under direct sound field conditions
EN 16272-5:2023

This European Standard describes a test method for measuring a quantity representative of the intrinsic characteristics of sound reflection from railway noise barriers and related devices acting on airborne sound propagation, the sound reflection index.
The test method is intended for the following applications:
- determination of the intrinsic characteristics of sound reflection of noise barriers and related devices acting on airborne sound propagation to be installed along railways, to be measured either on typical installations alongside railways or on a relevant sample section;
- determination of the in situ intrinsic characteristics of sound reflection of noise barriers and related devices acting on airborne sound propagation in actual use;
- comparison of design specifications with actual performance data after the completion of the construction work;
- verification of the long term performance of noise barriers and related devices acting on airborne sound propagation (with a repeated application of the method).
The test method is not intended for the following applications:
- determination of the intrinsic characteristics of sound reflection of noise barriers and related devices acting on airborne sound propagation to be installed in reverberant conditions, e.g. inside tunnels or deep trenches.
Results for the sound reflection index are expressed as a function of frequency, in one-third octave bands, where possible, between 100 Hz and 5 kHz. If it is not possible to get valid measurements results over the whole frequency range indicated, the results should be given in a restricted frequency range and the reasons of the restriction(s) should be clearly reported.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16272-3-2:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2: Normalized railway noise spectrum and single number ratings for direct field applications
EN 16272-3-2:2023

This European Standard specifies a normalized railway noise spectrum for the evaluation and assessment of the acoustic performance of devices designed to reduce airborne railway noise near railways.
All noise reducing devices different from noise barriers and related devices acting on airborne sound propagation, e.g. devices for attenuation of ground borne vibration and on-board devices, are out of the scope of this European Standard.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16272-3-1:2023(Main)
Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-1: Normalized railway noise spectrum and single number ratings for diffuse sound field applications
EN 16272-3-1:2023

This European Standard specifies a normalized railway noise spectrum for the evaluation and assessment of the acoustic performance of devices designed to reduce airborne railway noise near railways.
All noise reducing devices different from noise barriers and related devices acting on airborne sound propagation, e.g. devices for attenuation of ground borne vibration and on-board devices are out of the scope of this European Standard.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17495:2022(Main)
Railway Applications - Acoustics - Determination of the dynamic stiffness of elastic track components related to noise and vibration - Rail pads and rail fastening assemblies
EN 17495:2022

This European Standard specifies laboratory test procedures to determine the dynamic stiffness of resilient components of track for the purpose of evaluating the environmental noise and vibration performance of the track.
This standard is applicable to complete track fastening assemblies and to pad components of fastening systems.
It is applicable to specimens of a single rail seat fastener.
It is applicable to the measurement of a tangent, dynamic stiffness under a prescribed pre-load and the associated hysteretic damping loss factor.
It provides measurement methods and pre-load, excitation and frequency range conditions for application to ground borne and structure borne noise as well as for rolling noise.
It provides measurement methods and pre-load, excitation and frequency range conditions for application to ground borne and structure borne noise as well as for rolling noise.
It is not applicable to the measurement of the stiffness of pads and fastening assemblies under static or low frequency dynamic loading which is specified in EN 13146-9.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15610:2019(Main)
Railway applications - Acoustics - Rail and wheel roughness measurement related to rolling noise generation
EN 15610:2019

This European Standard specifies a direct method for characterizing the surface roughness of the rail and
wheel associated with rolling noise ("acoustic roughness"), in the form of a one-third octave band spectrum. This
standard describes a method for:
a) selecting measuring positions along a track or selecting wheels of a vehicle;
b) selecting lateral positions for measurements;
c) the data acquisition procedure;
d) measurement data processing in order to estimate a set of one-third octave band roughness spectra;
e) presentation of this estimate for comparison with limits of acoustic roughness;
f) comparison with a given upper limit in terms of a one-third octave band wavelength spectrum;
g) the measuring system requirements.
It is applicable to:
a) the performance testing of reference track sections in relation to the acceptance test for noise emitted by
railway vehicles;
b) the performance testing of track sections in relation to noise emitted by railway vehicles;
c) the acceptance of the running surface condition only in the case where the acoustic roughness is the
acceptance criterion;
d) the assessment of the wheel surface condition as an input for the acoustic acceptance of brake blocks;
e) the assessment of the wheel and rail roughness as input to the calculation of combined wheel rail
roughness;
f) the diagnosis of wheel-rail noise issues for specific tracks or wheels;
g) the assessment of the wheel and rail roughness as input to rolling noise modelling;
h) the assessment of the wheel and rail roughness as input to noise source separation methods.
It is not applicable to the:
a) measurement of roughness using an indirect method;
b) direct measurement of combined wheel-rail roughness;
c) analysis of the effect of wheel-rail interaction, such as a “contact filter”;
d) approval of rail and wheel reprofiling, including rail grinding operations, except for those where the
acoustic roughness is specifically the approval criterion (and not the grinding quality criteria as provided
in e.g. EN 13231);
e) characterisation of track and wheel geometry except where associated with noise generation.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16951-2:2018(Main)
Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Procedures for assessing long term performance - Part 2: Non-acoustic characteristics
EN 16951-2:2018

This draft European Standard specifies requirements for assessing the working life and provides the relevant exposure conditions.
Standards of construction and any material tests conducted should provide evidence of resistance to specified conditions selected from the following:
I.   Chemical Agents   Location
dependent
II.   De-icing salt   Location/climate
dependent
III.   Dirty water/dust   Location/
Climate
dependent
IV.   Dew   Climate
dependent
V.   Freeze/thaw   Climate
dependent
VI.   Cold   Climate
dependent
VII.   Heat   Climate
dependent
VIII.   UV Radiation   Climate
dependent
IX.   Traffic Vibration   Location
dependent
X.   Biological Process   Climate
dependent
XI.   Ozone   Location
dependent
XII.   Water   Climate
dependent
XIII.   Water spray
Wet/dry   Location
dependent
NOTE   Special care needs to be taken for combinations of different materials, whether inside a single device or in combination with other devices (for example: a combination of different acoustic elements or another combination of acoustic and structural elements).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16727-1:2018(Main)
Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 1: Mechanical performance under static loadings - Calculation and test methods
EN 16727-1:2018

This draft European Standard applies only for noise barriers composed of posts as structural elements and panels as acoustic elements (fabricated for example from metal, timber, plastic or concrete panels, etc.), including accidental combination of these materials. It also applies for acoustic claddings of existing walls and partial or total acoustic coverings of the rail track.
Acoustic elements need to be tested together with the structural elements to represent the noise barrier as in the intended use.
This draft European Standard provides criteria to verify railway noise barriers and related devices according to basic mechanical performance under standard conditions of exposure, irrespective of the materials used. A range of conditions and optional requirements is provided to allow for the wide diversity of practice within Europe. Individual aspects of performance are covered separately in the annexes.
This draft European Standard provides test methods and criteria for the assessment of railway noise barriers with respect to their mechanical performance and stability under static loading.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day