SIST EN 12472:2006/kprA1:2009

SLOVENSKI STANDARD
SIST EN 12472:2006/kprA1:2009
01-februar-2009
6LPXOLUDQDREUDEQRNRUR]LMVNDPHWRGD]DRGNULYDQMHQLNOMDL]SUHYOHþHQLK
SUHGPHWRY
Method for the simulation of wear and corrosion for the detection of nickel release from
coated items
Simulierte Abrieb- und Korrosionsprüfung zum Nachweis der Nickelabgabe von mit
Auflagen versehenen Gegenständen
Méthode de simulation de l'usure et de la corrosion pour la détermination du nickel libéré
par les objets revêtus
Ta slovenski standard je istoveten z: EN 12472:2005/prA1
ICS:
39.060 Nakit Jewellery
SIST EN 12472:2006/kprA1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12472:2006/kprA1:2009

---------------------- Page: 2 ----------------------

SIST EN 12472:2006/kprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 12472:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2008
ICS 39.060

English Version
Method for the simulation of wear and corrosion for the detection
of nickel release from coated items
Méthode pour la simulation de l'usure et de la corrosion Simulierte Abrieb- und Korrosionsprüfung zum Nachweis
pour la détermination du nickel libéré par les objets revetus der Nickelabgabe von mit Auflagen versehenen
Gegenständen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 347.
This draft amendment A1, if approved, will modify the European Standard EN 12472:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European S
...