iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61340-2-3:2016/AC:2023

(Corrigendum)

Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2016/COR1:2023)

Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2016/COR1:2023)

Elektrostatik - Teil 2-3: Prüfverfahren zur Bestimmung des Widerstandes und des spezifischen Widerstandes von festen Werkstoffen, die zur Vermeidung elektrostatischer Aufladung verwendet werden (IEC 61340-2-3:2016/COR1:2023)

Électrostatique - Partie 2-3: Méthodes d'essais pour la détermination de la résistance et de la résistivité des matériaux solides destinés à éviter les charges électrostatiques (IEC 61340-2-3:2016/COR1:2023)

Elektrostatika - 2-3. del: Preskusne metode za ugotavljanje upora in upornosti trdnih snovi, uporabljanih za preprečevanje akumulacije elektrostatičnega naboja - Popravek AC (IEC 61340-2-3:2016/COR1:2023)

General Information

Status
Published
Publication Date
27-Aug-2023
ICS
17.220.99 - Other standards related to electricity and magnetism
29.020 - Electrical engineering in general
Technical Committee
I09 - Imaginarni 09
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Aug-2023
Due Date
14-Oct-2023
Completion Date
28-Aug-2023
Ref Project
EN 61340-2-3:2016/AC:2023-08 - Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation

Relations

Corrects
SIST EN 61340-2-3:2016 - Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-3:2016)
Effective Date
08-Aug-2023

Buy Standard

EN 61340-2-3:2016/AC:2023EN 61340-2-3:2016/AC:2023
PreviousNext
Corrigendum
EN 61340-2-3:2016/AC:2023
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61340-2-3:2016/AC:2023
01-oktober-2023
Elektrostatika - 2-3. del: Preskusne metode za ugotavljanje upora in upornosti
trdnih snovi, uporabljanih za preprečevanje akumulacije elektrostatičnega naboja -
Popravek AC (IEC 61340-2-3:2016/COR1:2023)
Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of
solid materials used to avoid electrostatic charge accumulation (IEC 61340-2-
3:2016/COR1:2023)
Elektrostatik - Teil 2-3: Prüfverfahren zur Bestimmung des Widerstandes und des
spezifischen Widerstandes von festen Werkstoffen, die zur Vermeidung elektrostatischer
Aufladung verwendet werden (IEC 61340-2-3:2016/COR1:2023)
Électrostatique - Partie 2-3: Méthodes d'essais pour la détermination de la résistance et
de la résistivité des matériaux solides destinés à éviter les charges électrostatiques (IEC
61340-2-3:2016/COR1:2023)
Ta slovenski standard je istoveten z: EN 61340-2-3:2016/AC:2023-08
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
SIST EN 61340-2-3:2016/AC:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 61340-2-3:2016/AC:2023

---------------------- Page: 2 ----------------------
SIST EN 61340-2-3:2016/AC:2023


EUROPEAN STANDARD EN 61340-2-3:2016/AC:2023-
08
NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2023

ICS 17.220.99; 29.020
English Version
Electrostatics - Part 2-3: Methods of test for determining the
resistance and resistivity of solid materials used to avoid
electrostatic charge accumulation
(IEC 61340-2-3:2016/COR1:2023)
Électrostatique - Partie 2-3: Méthodes d'essais pour la Elektrostatik - Teil 2-3: Prüfverfahren zur Bestimmung des
détermination de la résistance et de la résistivité des Widerstandes und des spezifischen Widerstandes von
matériaux solides destinés à éviter les charges festen Werkstoffen, die zur Vermeidung elektrostatischer
électrostatiques Aufladung verwendet werden
(IEC 61340-2-3:2016/COR1:2023) (IEC 61340-2-3:2016/COR1:2023)
This corrigendum becomes effective on 4 August 2023 for incorporation in the English language version of the EN.



European Committee for Electrotechnical
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 61340-2-1:2016/A1:2022(Amendment)
Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge (IEC 61340-2-1:2015/AMD1:2022)
EN 61340-2-1:2015/A1:2022

This part of IEC 61340 describes test methods for measuring the rate of dissipation of static charge of insulating and static materials and products.
It includes a generic description of test methods and detailed test procedures for specific applications.
The two test methods for measuring charge decay time, one using corona charging and one using a charged metal plate are different and might not give equivalent results. Nevertheless, each method has a range of applications for which it is best suited. The corona charging method is suitable for evaluating the ability of materials, for example textiles, packaging, etc., to dissipate charge from their own surfaces. The charged metal plate method is suitable for evaluating the ability of materials and objects such as gloves, finger cots, hand tools, etc. to dissipate charge from conductive objects placed on or in contact with them. The charged plate method might not be suitable for evaluating the ability of materials to dissipate charge from their own surfaces.
In addition to its general application, this horizontal standard is also intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108.
One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard shall not apply unless specifically referred to or included in the relevant publications.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61340-5-3:2022(Main)
Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices (IEC 61340-5-3:2022)
EN IEC 61340-5-3:2022

This part of IEC 61340 defines the ESD protective packaging properties needed to protect ESD sensitive devices (ESDS) through all phases of production, rework/maintenance, transport and storage. Test methods are referenced to evaluate packaging and packaging materials for these product and material properties. Performance limits are provided.
This standard does not address protection from electromagnetic interference (EMI), electromagnetic pulsing (EMP) or protection of electrically initiated explosive materials or devices.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 61340-4-7:2022(Main)
Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization
prEN IEC 61340-4-7:2022

This part of IEC 61340 provides test methods and procedures for evaluating and selecting air ionization equipment and systems (ionizers).
This document establishes measurement techniques, under specified conditions, to determine offset voltage (ion balance) and decay (charge neutralization) time for ionizers.
This document does not include measurements of electromagnetic interference (EMI), or the use of ionizers in connection with ordnance, flammables, explosive items or electrically initiated explosive devices.
As contained in this document, the test methods and test conditions can be used by manufacturers of ionizers to provide performance data describing their products. Users of ionizers are urged to modify the test methods and test conditions for their specific application in order to qualify ionizers for use, or to make periodic verifications of ionizer performance. The user will decide the extent of the data required for each application.
See Annex A for information regarding theoretical background and additional information on the standard test method for the performance of ionizers.
CAUTION: Procedures and equipment described in this document can expose personnel to hazardous electrical and non-electrical conditions. Users of this document are responsible for selecting equipment that complies with applicable laws, regulatory codes and both external and internal policy. Users are cautioned that this document cannot replace or supersede any requirements for personnel safety. See Annex C for safety considerations.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 61340-5-1:2023(Main)
Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
prEN IEC 61340-5-1:2023
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61340-2-1:2016/A1:2022(Amendment)
Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge (IEC 61340-2-1:2015/AMD1:2022)
EN 61340-2-1:2015/A1:2022

This part of IEC 61340 describes test methods for measuring the rate of dissipation of static charge of insulating and static materials and products.
It includes a generic description of test methods and detailed test procedures for specific applications.
The two test methods for measuring charge decay time, one using corona charging and one using a charged metal plate are different and might not give equivalent results. Nevertheless, each method has a range of applications for which it is best suited. The corona charging method is suitable for evaluating the ability of materials, for example textiles, packaging, etc., to dissipate charge from their own surfaces. The charged metal plate method is suitable for evaluating the ability of materials and objects such as gloves, finger cots, hand tools, etc. to dissipate charge from conductive objects placed on or in contact with them. The charged plate method might not be suitable for evaluating the ability of materials to dissipate charge from their own surfaces.
In addition to its general application, this horizontal standard is also intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108.
One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard shall not apply unless specifically referred to or included in the relevant publications.

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61340-5-3:2022(Main)
Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices (IEC 61340-5-3:2022)
EN IEC 61340-5-3:2022

This part of IEC 61340 defines the ESD protective packaging properties needed to protect ESD sensitive devices (ESDS) through all phases of production, rework/maintenance, transport and storage. Test methods are referenced to evaluate packaging and packaging materials for these product and material properties. Performance limits are provided.
This standard does not address protection from electromagnetic interference (EMI), electromagnetic pulsing (EMP) or protection of electrically initiated explosive materials or devices.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 61340-4-7:2022(Main)
Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization
prEN IEC 61340-4-7:2022

This part of IEC 61340 provides test methods and procedures for evaluating and selecting air ionization equipment and systems (ionizers).
This document establishes measurement techniques, under specified conditions, to determine offset voltage (ion balance) and decay (charge neutralization) time for ionizers.
This document does not include measurements of electromagnetic interference (EMI), or the use of ionizers in connection with ordnance, flammables, explosive items or electrically initiated explosive devices.
As contained in this document, the test methods and test conditions can be used by manufacturers of ionizers to provide performance data describing their products. Users of ionizers are urged to modify the test methods and test conditions for their specific application in order to qualify ionizers for use, or to make periodic verifications of ionizer performance. The user will decide the extent of the data required for each application.
See Annex A for information regarding theoretical background and additional information on the standard test method for the performance of ionizers.
CAUTION: Procedures and equipment described in this document can expose personnel to hazardous electrical and non-electrical conditions. Users of this document are responsible for selecting equipment that complies with applicable laws, regulatory codes and both external and internal policy. Users are cautioned that this document cannot replace or supersede any requirements for personnel safety. See Annex C for safety considerations.

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 61340-5-1:2023(Main)
Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
prEN IEC 61340-5-1:2023
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
EN ISO/ASTM 52924:2023

This standard is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of quality with the aid of this standard. This standard applies to parts that have been manufactured from a thermoplastic polymer by means of laser sintering (LS) or material extrusion (MEX). Its applicability to other processes for polymers shall be checked in the specific case. The quality grades apply to parts that have not been post-processed after unpacking from the build space and the removal of possible support structures.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13670:2010/A102:2023
Execution of concrete structures - National Annex
  • National annex
    2 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    2 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day