SIST EN 16293:2013

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackung - Verpackungen aus Glas - Tiefe BVS-Mundstücke für stille WeineEmballage - Emballages en verre - Bagues BVS hautes pour vins tranquillesPackaging - Glass Packaging - Deep BVS finishes for still wines67.160.10Alcoholic beverages55.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 16293:2013SIST EN 16293:2013en,fr,de01-julij-2011SIST EN 16293:2013SLOVENSKI
STANDARD



SIST EN 16293:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16293
March 2013 ICS 55.100 English Version
Packaging - Glass Packaging - Deep BVS finishes for still wines Emballage - Emballages en verre - Bagues BVS hautes pour vins tranquilles
Verpackung - Verpackungen aus Glas - Tiefe BVS-Mundstücke für stille Weine This European Standard was approved by CEN on 12 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16293:2013: ESIST EN 16293:2013



EN 16293:2013 (E) 2 Contents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Terms and definitions . 5 3 Requirements . 5 4 Constructions and dimensions of deep BVS finishes . 5 5 Thread profile construction . 10 6 Construction for the bore entrance profile . 11 7 Construction of transfer bead . 12 8 Construction of the neck . 12 9 BVS finishes — Dimensions Y and X . 13 10 Control of bottle and neck verticality . 16 Bibliography. 17
SIST EN 16293:2013



EN 16293:2013 (E) 3 Foreword This document (EN 16293:2013) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16293:2013



EN 16293:2013 (E) 4 Introduction This document is based on CE.T.I.E. (International Technical Centre for Bottling and related Packaging) data sheet GME 30.13 [3]. Efficient packaging is of great importance for the distribution and the protection of goods as insufficient or inappropriate packaging can lead to damage or wastage of the contents of the pack. SIST EN 16293:2013



EN 16293:2013 (E) 5 1 Scope This European Standard specifies dimensions of a series of deep screw finishes for the closure of wines with a CO2 content below 1,2 grams per litre. NOTE Carbonation ≥ 1,2 g/l CO2 requires a suitable container and closure agreed between the glass maker, closure maker and packer/filler. 2 Terms and definitions For the purposes of this document, the following term and definition applies. 2.1 deep BVS finishes finishes designed to take an aluminium tamper-evident closure with extended skirt which is re-formed during application 3 Requirements Deep BVS finishes require a good control of container verticality as specified in Clause 10 "Control of bottle and neck verticality". 4 Constructions and dimensions of deep BVS finishes
The constructions of deep BVS finishes shall be as given in the following figures:  Figure 1: Constructions and dimensions  Figure 2: Optional finish wi
...