SIST EN 14617-12:2012
(Main)Agglomerated stone - Test methods - Part 12: Determination of dimensional stability
Agglomerated stone - Test methods - Part 12: Determination of dimensional stability
This European Standard specifies the test method to be used for the determination of the dimensional stability and warping of agglomerated stones when in contact with water.
This European Standard applies to agglomerated stones to be installed by adhesive on walls and floors.
The test is mainly performed to classify the material according to the degree of sensitivity to water and to select a suitable adhesive for the correct laying of agglomerated stones.
Künstlich hergestellter Stein - Prüfverfahren - Teil 12: Bestimmung der Maßhaltigkeit
Diese Europäische Norm legt das zur Bestimmung von Maßhaltigkeit und Verwölbung (Werfen) von künstlich hergestellten Steinen anzuwendende Prüfverfahren fest, wenn diese mit Wasser in Kontakt kommen. Diese Europäische Norm gilt für künstlich hergestellte Steine, die mit Klebstoff an Wänden und auf Fußböden zu verlegen sind. Die Prüfung wird hauptsächlich vorgenommen, um das Material entsprechend dem Grad der Empfindlichkeit gegenüber Wasser zu klassifizieren und um einen geeigneten Klebstoff für die Verlegung der künstlich hergestellten Steine auszuwählen.
Pierre agglomérée - Méthodes d'essai - Partie 12: Détermination de la stabilité dimensionnelle
La présente Norme européenne spécifie une méthode d’essai à utiliser pour déterminer la stabilité
dimensionnelle et le gauchissement de pierres agglomérées lorsqu’elles sont en contact avec l’eau.
La présente Norme européenne s’applique aux pierres agglomérées devant être collées sur les murs et les
sols.
L’essai est principalement réalisé pour classer le matériau en fonction de son degré de sensibilité à l’eau et
pour sélectionner un adhésif approprié pour une pose correcte des pierres agglomérées.
Aglomeriran kamen - Preskusne metode - 12. del: Ugotavljanje dimenzijske stabilnosti
Ta evropski standard določa preskusno metodo za ugotavljanje dimenzijske stabilnosti in zvijanja aglomeriranega kamna ob stiku z vodo. Ta evropski standard se uporablja za aglomerirani kamen, namenjen za lepljenje na zidove in tla. Namen preskusa je razvrstiti material glede na stopnjo občutljivosti na vodo in izbrati ustrezno lepilo za pravilno polaganje aglomeriranega kamna.
General Information
- Status
- Published
- Publication Date
- 10-Jun-2012
- Technical Committee
- IKER - Ceramics
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jun-2012
- Due Date
- 06-Aug-2012
- Completion Date
- 11-Jun-2012
Relations
- Effective Date
- 01-Jul-2012
Overview
EN 14617-12:2012 - Agglomerated stone: Test methods - Part 12: Determination of dimensional stability (CEN) specifies a laboratory test to determine the dimensional stability and warping of agglomerated stone (engineered stone) when in contact with water. The method is intended for agglomerated tiles to be fixed by adhesive on walls and floors and is used to classify materials by sensitivity to water and to guide the selection of a suitable adhesive for correct installation.
Key topics and requirements
- Test principle: measure vertical displacement of a free corner caused by moisture from a wet felt placed on the tile backside; deformation recorded by digital gauges.
- Apparatus: flat reference plane, three supports, wet cloth/felt, polyethylene film, water spray dispenser and four digital gauges (0.01 mm accuracy) - five gauges in the informative procedure.
- Test conditions: standard laboratory conditions (23 ± 2) °C and 50 % RH.
- Specimens: nominal tile size 300 × 300 mm at installation thickness; store vertically for at least 24 h before testing. Very wet samples: dry 12 h at 50 °C prior to conditioning.
- Procedure: tile placed upside down on three supports, wet felt applied and kept continuously wet; deformations recorded after 6 hours.
- Result expression: vertical displacement D = |d(3) − d(1)| (measured after 6 h, accuracy 0.1 mm).
- Classification (water sensitivity):
- Class A - stable, D < 0.3 mm
- Class B - sensitive, 0.3 mm ≤ D < 0.6 mm
- Class C - unstable/very sensitive, D ≥ 0.6 mm
- Adhesive guidance (Annex B):
- Class A: adhesive selected per substrate/other requirements.
- Class B: prefer fast-setting/drying cementitious adhesive (class F, EN 12004); if displacement still ≥ 0.3 mm, use water-free reaction resin adhesive (type R, EN 12004).
- Class C: use water-free reaction resin adhesive (type R).
Applications and who should use this standard
- Manufacturers of agglomerated stone: to verify product performance and provide classification data for technical datasheets.
- Independent testing laboratories: to perform standardized dimensional stability testing for conformity, QA and R&D.
- Specifiers, architects and consultants: to assess suitability of agglomerated tiles for wet environments and select compatible adhesives.
- Tile installers and adhesive manufacturers: to choose correct adhesive systems (cementitious vs reaction resin) based on measured water sensitivity and to reduce risk of bowing or loss of planarity.
- Regulatory and procurement bodies: to include standardized test data in specifications and acceptance criteria.
Related standards
- EN 14617 series for agglomerated stone test methods (Parts 1, 2, 4, 5, 6, 8, 9, 10, 11, 13, 15, 16)
- EN 12004 - Adhesives for tiles (classification: F, R)
- EN 14411 - Ceramic tiles (non-absorbing substrate example)
Keywords: EN 14617-12:2012, agglomerated stone, dimensional stability, warping, test method, tiles, water sensitivity, adhesive selection, CEN.
Frequently Asked Questions
SIST EN 14617-12:2012 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Agglomerated stone - Test methods - Part 12: Determination of dimensional stability". This standard covers: This European Standard specifies the test method to be used for the determination of the dimensional stability and warping of agglomerated stones when in contact with water. This European Standard applies to agglomerated stones to be installed by adhesive on walls and floors. The test is mainly performed to classify the material according to the degree of sensitivity to water and to select a suitable adhesive for the correct laying of agglomerated stones.
This European Standard specifies the test method to be used for the determination of the dimensional stability and warping of agglomerated stones when in contact with water. This European Standard applies to agglomerated stones to be installed by adhesive on walls and floors. The test is mainly performed to classify the material according to the degree of sensitivity to water and to select a suitable adhesive for the correct laying of agglomerated stones.
SIST EN 14617-12:2012 is classified under the following ICS (International Classification for Standards) categories: 91.100.15 - Mineral materials and products. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14617-12:2012 has the following relationships with other standards: It is inter standard links to SIST EN 14617-12:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 14617-12:2012 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aglomeriran kamen - Preskusne metode - 12. del: Ugotavljanje dimenzijske stabilnostiKünstlich hergestellter Stein - Prüfverfahren - Teil 12: Bestimmung der MaßhaltigkeitPierre agglomérée - Méthodes d'essai - Partie 12: Détermination de la stabilité dimensionnelleAgglomerated stone - Test methods - Part 12: Determination of dimensional stability91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 14617-12:2012SIST EN 14617-12:2012en,fr,de01-julij-2012SIST EN 14617-12:2012SLOVENSKI
STANDARDSIST EN 14617-12:20051DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14617-12
April 2012 ICS 91.100.15 Supersedes EN 14617-12:2005English Version
Agglomerated stone - Test methods - Part 12: Determination of dimensional stability
Pierre agglomérée - Méthodes d'essai - Partie 12: Détermination de la stabilité dimensionnelle
Künstlich hergestellter Stein - Prüfverfahren - Teil 12: Bestimmung der Maßhaltigkeit This European Standard was approved by CEN on 9 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14617-12:2012: ESIST EN 14617-12:2012
Test method for tiles below 12 mm .9Annex B (informative)
Choice of the adhesive . 10Bibliography . 12 SIST EN 14617-12:2012
EN 14617-5, Agglomerated stone — Test methods — Part 5: Determination of freeze and thaw resistance EN 14617-6, Agglomerated stone — Test methods — Part 6: Determination of thermal shock resistance EN 14617-8, Agglomerated stone — Test methods — Part 8: Determination of resistance to fixing (dowel hole) EN 14617-9, Agglomerated stone — Test methods — Part 9: Determination of impact resistance EN 14617-10, Agglomerated stone — Test methods — Part 10: Determination of chemical resistance EN 14617-11, Agglomerated stone — Test methods — Part 11: Determination of linear thermal expansion coefficient EN 14617-12, Agglomerated stone — Test methods — Part 12: Determination of dimensional stability EN 14617-13, Agglomerated stone — Test methods — Part 13: Determination of electrical resistivity EN 14617-15, Agglomerated stone — Test methods — Part 15: Determination of compressive strength EN 14617-16, Agglomerated stone — Test methods — Part 16: Determination of dimensions, geometric characteristics and surface quality of modular tiles According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, SIST EN 14617-12:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...