oSIST prEN ISO/ASTM 52941:2023

SLOVENSKI STANDARD
oSIST prEN ISO/ASTM 52941:2023
01-november-2023
[Not translated]
Additive manufacturing - System performance and reliability - Acceptance tests for laser
metal powder-bed fusion machines for metallic materials for aerospace application
(ISO/ASTM DIS 52941:2023)
Additive Fertigung - Systemleistung und Betriebssicherheit - Abnahmeprüfung von
pulverbettbasierten Laserstrahlanlagen für metallische Werkstoffe in Luft- und
Raumfahrtanwendungen (ISO/ASTM DIS 52941:2023)
Fabrication additive - Performance et fiabilité du système - Essais de réception pour
machines de fusion laser sur lit de poudre pour les matériaux métalliques pour
l’application aérospatiale (ISO/ASTM DIS 52941:2023)
Ta slovenski standard je istoveten z: prEN ISO/ASTM 52941
ICS:
25.030 3D-tiskanje Additive manufacturing
49.025.01 Materiali za letalsko in Materials for aerospace
vesoljsko gradnjo na splošno construction in general
oSIST prEN ISO/ASTM 52941:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO/ASTM 52941:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO/ASTM 52941:2023
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52941
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-09-28 2023-12-21
Additive manufacturing — System performance and
reliability — Acceptance tests for laser metal powder-
bed fusion machines for metallic materials for aerospace
application
Fabrication additive — Performance et fiabilité du système — Essais de réception pour machines de fusion
laser sur lit de poudre pour les matériaux métalliques pour l’application aérospatiale
ICS: 25.030
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/ASTM DIS 52941:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO/ASTM 52941:2023
ISO/ASTM DIS 52941:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52941
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:

Additive manufacturing — System performance and
reliability — Acceptance tests for laser metal powder-
bed fusion machines for metallic materials for aerospace
application
Fabrication additive — Performance et fiabilité du système — Essais de réception pour machines de fusion
laser sur lit de poudre pour les matériaux métalliques pour l’application aérospatiale
ICS: 25.030
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
© ISO/ASTM International 2023 THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
NOT BE REFERRED TO AS AN INTERNATIONAL
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below STANDARD UNTIL PUBLISHED AS SUCH.
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
ISO copyright office ASTM International
TECHNOLOGICAL, COMMERCIAL AND
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
USER PURPOSES, DRAFT INTERNATIONAL
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
Phone: +41 22 749 01 11 Phone: +610 832 9634
POTENTIAL TO BECOME STANDARDS TO
Fax: +610 832 9635
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org Email: khooper@astm.org
NATIONAL REGULATIONS.
Website: www.iso.org Website: www.astm.org ISO/ASTM DIS 52941:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO/ASTM International 2023 – All rights reserved
PROVIDE SUPPORTING
...