SIST EN IEC 62683-1:2026

SLOVENSKI STANDARD
01-julij-2026
Nadomešča:
SIST EN 62683:2017
Nizkonapetostne stikalne in krmilne naprave - Podatki o izdelku in njegovih
lastnostih za izmenjavo informacij - 1. del: Kataloški podatki (IEC 62683-1:2026)
Low-voltage switchgear and controlgear - Product data and properties for information
exchange - Part 1: Catalogue data (IEC 62683-1:2026)
Niederspannungsschaltgeräte - Produktdaten und -eigenschaften für den
Informationsaustausch - Teil 1: Katalogdaten (IEC 62683-1:2026)
Appareillage à basse tension - Données et propriétés de produits pour l’echange
d’informations - Partie 1: Données de catalogue (IEC 62683-1:2026)
Ta slovenski standard je istoveten z: EN IEC 62683-1:2026
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62683-1

NORME EUROPÉENNE
EUROPÄISCHE NORM June 2026
ICS 29.130.20 Supersedes EN 62683-1:2017
English Version
Switchgear, controlgear and their assemblies for low-voltage -
Product data and properties for information exchange - Part 1:
Catalogue data
(IEC 62683-1:2026)
Appareillages et ensembles d'appareillage basse tension - Niederspannungsschaltgeräte - Produktdaten und -
Données et propriétés de produits pour l'échange eigenschaften für den Informationsaustausch - Teil 1:
d'informations - Partie 1: Données de catalogue Katalogdaten
(IEC 62683-1:2026) (IEC 62683-1:2026)
This European Standard was approved by CENELEC on 2026-05-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62683-1:2026 E

European foreword
The text of document 121/237/FDIS, future edition 2 of IEC 62683-1, prepared by TC 121 "Switchgear
and controlgear and their assemblies for low voltage" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 62683-1:2026.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2027-06-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2029-06-30
document have to be withdrawn
This document supersedes EN 62683-1:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62683-1:2026 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60715 NOTE Approved as EN 60715
IEC 60947-3 NOTE Approved as EN IEC 60947-3
IEC 60947-4-2 NOTE Approved as EN IEC 60947-4-2
IEC 60947-5-1 NOTE Approved as EN IEC 60947-5-1
IEC 60947-5-2 NOTE Approved as EN IEC 60947-5-2
IEC 60947-5-4 NOTE Approved as EN 60947-5-4
IEC 60947-5-5 NOTE Approved as EN 60947-5-5
IEC 60947-5-7 NOTE Approved as EN IEC 60947-5-7
IEC 60947-6-1 NOTE Approved as EN IEC 60947-6-1
IEC 60947-6-2 NOTE Approved as EN IEC 60947-6-2
IEC 60947-7-2 NOTE Approved as EN 60947-7-2
IEC 60947-7-3 NOTE Approved as EN 60947-7-3
IEC 60947-8 NOTE Approved as EN IEC 60947-8
IEC 61095 NOTE Approved as EN IEC 61095
IEC 61439-2 NOTE Approved as EN IEC 61439-2
IEC 61439-3 NOTE Approved as EN IEC 61439-3
IEC 61439-4 NOTE Approved as EN 61439-4
IEC 61439-5 NOTE Approved as EN IEC 61439-5
IEC 61439-6 NOTE Approved as EN 61439-6
IEC 61439-7 NOTE Approved as EN IEC 61439-7
IEC 61439-8 NOTE Approved as EN IEC 61439-8
IEC 61987-10 NOTE Approved as EN 61987-10
ISO 13850 NOTE Approved as EN ISO 13850
ISO 14025 NOTE Approved as EN ISO 14025
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60947-1 2020 Low-voltage switchgear and controlgear - EN IEC 60947-1 2021
Part 1: General rules
IEC 61360-1 - Standard data element types with associated EN 61360-1 -
classification scheme - Part 1: Definitions -
Principles and methods
IEC 61439-1 2020 Low-voltage switchgear and controlgear EN IEC 61439-1 2021
assemblies - Part 1: General rules

IEC 62683-1 ®
Edition 2.0 2026-04
INTERNATIONAL
STANDARD
Switchgear, controlgear and their assemblies for low-voltage - Product data and
properties for information exchange -
Part 1: Catalogue data
ICS 29.130.20  ISBN 978-2-8327-1076-0

IEC 62683-1:2026-04(en)
IEC 62683-1:2026 © IEC 2026
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 10
2 Normative references . 10
3 Terms and definitions . 10
4 General . 11
5 Properties . 11
5.1 Criteria for naming properties. 11
5.2 Attributes of a property . 11
6 Block of properties. 12
7 Device classes . 13
7.1 Device class attributes . 13
7.2 Classification of low-voltage switchgear and controlgear . 13
7.3 Classification of low-voltage switchgear and controlgear assembly . 23
7.4 Properties of circuit-breaker classes . 28
7.4.1 General . 28
7.4.2 Circuit-breaker . 29
7.4.3 Release for circuit-breaker. 31
7.4.4 Residual current release for circuit-breaker . 32
7.4.5 Shunt release for circuit-breaker . 33
7.4.6 Under-voltage release for circuit-breaker . 33
7.4.7 Motor-operator for circuit-breaker . 34
7.4.8 Plug-in base for circuit-breaker . 35
7.4.9 Draw-out cradle for circuit-breaker . 36
7.5 Properties of switch classes . 36
7.5.1 General . 36
7.5.2 Switch-disconnector . 37
7.5.3 Switch-disconnector-fuse . 38
7.5.4 Fuse-switch-disconnector . 40
7.5.5 Operating handle (of a mechanical switching device) . 42
7.5.6 Shaft of operating handle . 43
7.6 Properties of contactors, starters and similar equipment classes. 43
7.6.1 General . 43
7.6.2 Motor protective switching device . 44
7.6.3 Motor management starter . 45
7.6.4 Motor management starter, extension module . 47
7.6.5 Motor management starter, operator panel . 48
7.6.6 Motor-starter combination . 49
7.6.7 Semiconductor motor controller . 50
7.6.8 Power contactor, AC switching . 51
7.6.9 Capacitor contactor . 53
7.6.10 Combination of contactors . 54
7.6.11 Power contactor, DC switching . 55
7.6.12 Thermal overload relay . 56
7.6.13 Electronic overload relay . 57
7.6.14 Relay for thermistor protection (PTC) . 59
IEC 62683-1:2026 © IEC 2026
7.6.15 Electromechanical contactor for household and similar purposes . 60
7.6.16 Motor-starter . 61
7.6.17 Transient suppressor . 62
7.6.18 Mechanical interlocking device . 63
7.6.19 Motor-starter enclosure. 63
7.6.20 Coil for contactor or contactor relay . 64
7.6.21 Electromechanical latching device . 65
7.6.22 Control interface for contactor . 66
7.7 Properties of control switch classes . 66
7.7.1 General . 66
7.7.2 Inductive proximity switch . 67
7.7.3 Capacitive proximity switch . 68
7.7.4 Non-mechanical magnetic proximity switch . 69
7.7.5 Ultrasonic proximity switch . 71
7.7.6 Through beam photoelectric proximity switch . 72
7.7.7 Emitter for through beam photoelectric proximity switch . 74
7.7.8 Retroreflective photoelectric proximity switch . 75
7.7.9 Diffuse reflective photoelectric proximity switch . 76
7.7.10 Diffuse reflective photoelectric proximity switch with background
suppression . 78
7.7.11 Auxiliary contact block . 79
7.7.12 Contactor relay . 80
7.7.13 Position switch . 81
7.7.14 Coded magnetic switch . 83
7.7.15 Safety position switch with separate actuator . 84
7.7.16 Guard locking safety position switch . 85
7.7.17 Trip wire switch . 87
7.7.18 Safety switch for hinge door . 88
7.7.19 Push-button . 89
7.7.20 Rotary button . 91
7.7.21 Front element for rotary button . 92
7.7.22 Joy stick . 93
7.7.23 Foot switch . 94
7.7.24 Emergency stop push-button . 96
7.7.25 Indicator light . 97
7.7.26 Indicating tower . 98
7.7.27 Front element for push-button . 99
7.7.28 Contact block for control circuit . 100
7.7.29 Front element for emergency stop push-button . 101
7.7.30 Module for indicating tower . 102
7.7.31 Reflector for reflective photoelectric proximity switch . 103
7.7.32 Lamp for control device . 104
7.7.33 Label holder for push-button and indicator light . 105
7.7.34 Label plate for control operation . 105
7.7.35 Protective cover for control device . 106
7.7.36 Pneumatic time delay auxiliary contact block . 107
7.7.37 Electronic time delay auxiliary block . 108
7.7.38 Time relay . 109
7.7.39 Panel mounted audible signalling device . 110
IEC 62683-1:2026 © IEC 2026
7.7.40 Rotary encoder . 111
7.7.41 Linear encoder . 112
7.7.42 Control station, empty . 113
7.7.43 Control station, complete . 114
7.7.44 Pendant control station, empty . 115
7.7.45 Pendant control station, complete . 116
7.7.46 Two-hand control device . 117
7.7.47 Cable connection assembly for control device . 118
7.7.48 Actuator for coded magnetic switch . 119
7.8 Properties of multiple function equipment classes . 119
7.8.1 Transfer switching equipment . 119
7.8.2 Control and protective switching device (CPS) . 119
7.9 Properties of terminal block classes . 119
7.9.1 General . 119
7.9.2 Feed-through terminal block . 120
7.9.3 Disconnect terminal block . 121
7.9.4 Protective conductor terminal block . 122
7.9.5 Fuse terminal block . 123
8 Device properties . 125
Bibliography . 185

Figure 1 – Operating distances of inductive and capacitive proximity switches . 178
Figure 2 – Ultrasonic proximity switch operating distance (IEC 60947-5-2:2019,
Figure 2) . 179
Figure 3 – Height of the device . 179
Figure 4 – Width of the device . 180
Figure 5 – Length of the device . 180

Table 1 – Library of blocks used in the device classes of low-voltage switchgear and
controlgear . 12
Table 2 – Low-voltage switchgear and controlgear classification . 13
Table 3 – Low-voltage switchgear and controlgear assembly classification . 24
Table 4 – Circuit-breaker . 29
Table 5 – Release for circuit-breaker . 31
Table 6 – Residual current release for circuit-breaker . 32
Table 7 – Shunt release for circuit-breaker . 33
Table 8 – Under-voltage release for circuit-breaker . 33
Table 9 – Motor-operator for circuit-breaker . 34
Table 10 – Plug-in base for circuit-breaker . 35
Table 11 – Draw-out cradle for circuit-breaker . 36
Table 12 – Switch-disconnector . 37
Table 13 – Switch-disconnector-fuse . 38
Table 14 – Fuse-switch-disconnector . 40
Table 15 – Operating handle (of a mechanical switching device). 42
Table 16 – Shaft of operating handle . 43
IEC 62683-1:2026 © IEC 2026
Table 17 – Motor protective switching device . 44
Table 18 – Motor management starter. 45
Table 19 – Motor management starter, extension module . 47
Table 20 – Motor management starter, operator panel . 48
Table 21 – Motor-starter combination . 49
Table 22 – Semiconductor motor controller . 50
Table 23 – Power contactor, AC switching . 51
Table 24 – Capacitor contactor . 53
Table 25 – Combination of contactors . 54
Table 26 – Power contactor, DC switching . 55
Table 27 – Thermal overload relay . 56
Table 28 – Electronic overload relay . 57
Table 29 – Relay for thermistor protection (PTC) . 59
Table 30 – Electromechanical contactor for household and similar purposes . 60
Table 31 – Motor-starter . 61
Table 32 – Transient suppressor . 62
Table 33 – Mechanical interlocking device . 63
Table 34 – Motor-starter enclosure . 63
Table 35 – Coil for contactor or contactor relay . 64
Table 36 – Electromechanical latching device . 65
Table 37 – Control interface for contactor . 66
Table 38 – Inductive proximity switch . 67
Table 39 – Capacitive proximity switch . 68
Table 40 – Non-mechanical magnetic proximity switch . 69
Table 41 – Ultrasonic proximity switch . 71
Table 42 – Through beam photoelectric proximity switch . 72
Table 43 – Emitter for through beam photoelectric proximity switch . 74
Table 44 – Retroreflective photoelectric proximity switch . 75
Table 45 – Diffuse reflective photoelectric proximity switch . 76
Table 46 – Diffuse reflective photoelectric proximity switch with background
suppression . 78
Table 47 – Auxiliary contact block . 79
Table 48 – Contactor relay . 80
Table 49 – Position switch . 81
Table 50 – Coded magnetic switch. 83
Table 51 – Safety position switch with separate actuator . 84
Table 52 – Guard locking safety position switch . 85
Table 53 – Trip wire switch . 87
Table 54 – Safety switch for hinge door . 88
Table 55 – Push-button . 89
Table 56 – Rotary button . 91
Table 57 – Front element for rotary button . 92
Table 58 – Joy stick . 93
IEC 62683-1:2026 © IEC 2026
Table 59 – Foot switch . 94
Table 60 – Emergency stop push-button . 96
Table 61 – Indicator light . 97
Table 62 – Indicating tower . 98
Table 63 – Front element for push-button . 99
Table 64 – Contact block for control circuit . 100
Table 65 – Front element for emergency stop push-button . 101
Table 66 – Module for indicating tower . 102
Table 67 – Reflector for reflective photoelectric proximity switch . 103
Table 68 – Lamp for control device . 104
Table 69 – Label holder for push-button and indicator light . 105
Table 70 – Label plate for control operation . 105
Table 71 – Protective cover for control device . 106
Table 72 – Pneumatic time delay auxiliary contact block . 107
Table 73 – Electronic time delay auxiliary block . 108
Table 74 – Time relay . 109
Table 75 – Panel mounted audible signalling device . 110
Table 76 – Rotary encoder . 111
Table 77 – Linear encoder . 112
Table 78 – Control station, empty . 113
Table 79 – Control station, complete . 114
Table 80 – Pendant control station, empty . 115
Table 81 – Pendant control station, complete. 116
Table 82 – Two-hand control device . 117
Table 83 – Cable connection assembly for control device . 118
Table 84 – Actuator for coded magnetic switch . 119
Table 85 – Feed-through terminal block . 120
Table 86 – Disconnect terminal block . 121
Table 87 – Protective conductor terminal block . 122
Table 88 – Fuse terminal block . 123
Table 89 – Library of properties used in the device classes . 125
Table 90 – Value lists of properties . 180

IEC 62683-1:2026 © IEC 2026
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Switchgear, controlgear and their assemblies for low-voltage -
Product data and properties for information exchange -
Part 1: Catalogue data
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 62683-1 has been prepared by committee 121: Switchgear and controlgear and their
assemblies for low voltage. It is an International Standard.
This second edition cancels and replaces the first edition published in 2017. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition for reflecting the content of the IEC CDD 62683DB which has been updated with the
change requests C00073, C00074, C00081, C00087, C00089, C00098, C00100, C00107,
C00111, C00116, C00119, C00122, C00146, C00148, C00159, C00167, C00174 and C00135:
a) New device class descriptions: ACC304, ACC305, ACC413, ACC417, ACC503, ACC504,
ACC505, ACC512, ACC516, ACC536, ACC537, ACC538, ACC540, ACC541, ACC542,
ACC543, ACC544, ACC545, ACC546, ACC547, ACC548.
IEC 62683-1:2026 © IEC 2026
b) New associated properties.
c) New assembly class structure: ACC101, ACC102, ACC103, ACC104, ACC106, ACC110,
ACC111, ACC112, ACC113, ACC114, ACC115, ACC116, ACC117, ACC118, ACC119,
ACC120, ACC121, ACC123, ACC124, ACC125, ACC126, ACC127, ACC131, ACC132,
ACC133, ACC135, ACC141, ACC142, ACC143, ACC144, ACC145, ACC146, ACC147,
ACC148, ACC150, ACC151, ACC152, ACC153, ACC154, ACC155, ACC156, ACC157,
ACC158, ACC159, ACC160, ACC161, ACC162, ACC163, ACC164, ACC165, ACC166,
ACC167, ACC170, ACC171, ACC172, ACC173, ACC174, ACC175.
The text of this International Standard is based on the following documents:
Draft Report on voting
121/237/FDIS 121/241/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
A list of all parts in the IEC 62683 series, published under the general title Switchgear,
controlgear and their assemblies for low-voltage - Product data and properties for information
exchange, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
– reconfirmed,
– withdrawn, or
– revised.
IEC 62683-1:2026 © IEC 2026
INTRODUCTION
Mainly large customers and wholesalers are requesting standardized product descriptions and
product properties to product manufacturers. However, all stakeholders can benefit from this
standardised presentation and data exchange.
Multiple associations or groups of actors launched different initiatives to try to respond to this
demand but, due to the lack of standardisation of classes and properties, the situation remains
unsatisfactory for both customers and manufacturers.
In order to keep the lead of product description, IEC proposes a consistent solution within its
product standards.
The purpose of this document is to:
– define device classes and properties for low-voltage switchgear and controlgear and their
assemblies in a dedicated standard,
– provide a basis of classes of the low-voltage switchgear and controlgear and their
assemblies, and properties introduced into the IEC 61360 database maintained by
IEC/SC3D (see http://std.iec.ch/iec61360).
This document is not intended to establish a hierarchy of product classes called classification.
The intended benefits of this document are to:
– reduce the costs, time and efforts of mapping data for each customer request;
– optimize the workflow of B2B exchanges;
– minimize duplication of articles in customer inventories and in databases;
– minimize losses and misinterpretation of data during exchanges;
– facilitate the selection of a product, especially regarding reliability and safety;
– give access to product data everywhere regardless of country, language and culture;
– provide product data related to environmental aspects such as material declaration;
– contribute to the fast growth of the e-business by simplifying the development of:
• e-Catalogue allowing the differentiation of products performances, certificates, etc;
• e-Commerce: use of electronic networks to exchange information, products, services
and payments for commercial and communication purposes between individuals
(consumers) and businesses, between businesses themselves.
The output of this document consists of:
– reference dictionary of low-voltage switchgear and controlgear and their assemblies using
existing terms from IEC documents. However, terminology used in e-business can be
relevant for the purpose of naming classes in this document to get a high level of
acceptance;
– properties for e-commerce purposes, conformity of properties with product standards being
the main goal of this document.
NOTE The classes "under consideration" are for information only and are intended to be completed during the next
maintenance cycle.
IEC 62683-1:2026 © IEC 2026
The description of low-voltage switchgear and controlgear and their assemblies within the
IEC 61360 database addresses the following technical aspects:
– IEC 61360 requires mandatory attributes. The complete sets of attributes for low-voltage
switchgear and controlgear and their assemblies are available in the IEC 62683DB domain
at https://cdd.iec.ch/cdd/iec62683/iec62683.nsf/TreeFrameset?OpenFrameSet. Within the
present document, only the most useful attributes are presented.
– The switchgear and controlgear and their assemblies data models are implemented in the
IEC 62683DB domain of the IEC Component Data Dictionary (CDD), by creating dictionaries
of blocks, classes and properties.

IEC 62683-1:2026 © IEC 2026
1 Scope
This part of IEC 62683 establishes the reference dictionary of the general description of classes
of low-voltage switchgear and controlgear and their assemblies based on defined properties.
This dictionary is used to facilitate the exchange in electronic format of data describing
low-voltage switchgear and controlgear, their accessories and their assemblies.
This document provides clear and unambiguous definitions of a limited number of properties
and classes which are mainly used for presentation, selection and identification of products
particularly in electronic catalogues.
Each property has an unambiguously defined meaning and name, and where relevant, a defined
value list, a defined format, and a defined unit.
Manufacturer specific features are not covered.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60947-1:2020, Low-voltage switchgear and controlgear - Part 1: General rules
IEC 61360-1, Standard data element types with associated classification scheme - Part 1:
Definitions - Principles and methods
IEC 61439-1:2020, Low-voltag
...