SIST EN ISO 12628:2022/A1:2025

SLOVENSKI STANDARD
01-september-2025
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Ugotavljanje mer, pravokotnosti in ravnosti predoblikovanih cevnih izolacij -
Dopolnilo 1 (ISO 12628:2022/Amd 1:2025)
Thermal insulating products for building equipment and industrial installations -
Determination of dimensions, squareness and linearity of preformed pipe insulation -
Amendment 1 (ISO 12628:2022/Amd 1:2025)
Wärmedämmstoffe für die Haustechnik und für betriebstechnische Anlagen -
Bestimmung der Maße, der Rechtwinkligkeit und der Linearität von vorgeformten
Rohrdämmstoffen - Änderung 1 (ISO 12628:2022/Amd 1:2025)
Produits isolants thermiques pour les équipements de bâtiments et les installations
industrielles - Détermination des dimensions, de l'équerrage et de la linéarité des
coquilles isolantes préformées - Amendement 1 (ISO 12628:2022/Amd 1:2025)
Ta slovenski standard je istoveten z: EN ISO 12628:2022/A1:2025
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 12628:2022/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2025
EUROPÄISCHE NORM
ICS 91.100.60
English Version
Thermal insulating products for building equipment and
industrial installations - Determination of dimensions,
squareness and linearity of preformed pipe insulation -
Amendment 1 (ISO 12628:2022/Amd 1:2025)
Produits isolants thermiques pour les équipements de Wärmedämmstoffe für die Haustechnik und für
bâtiments et les installations industrielles - betriebstechnische Anlagen - Bestimmung der Maße,
Détermination des dimensions, de l'équerrage et de la der Rechtwinkligkeit und der Linearität von
linéarité des coquilles isolantes préformées - vorgeformten Rohrdämmstoffen - Änderung 1 (ISO
Amendement 1 (ISO 12628:2022/Amd 1:2025) 12628:2022/Amd 1:2025)
This amendment A1 modifies the European Standard EN ISO 12628:2022; it was approved by CEN on 9 June 2025.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12628:2022/A1:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 12628:2022/A1:2025) has been prepared by Technical Committee ISO/TC 163
"Thermal performance and energy use in the built environment" in collaboration with Technical
Committee CEN/TC 88 “Thermal insulating materials and products” the secretariat of which is held by
DIN.
This Amendment to the European Standard EN ISO 12628:2022 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2025,
and conflicting national standards shall be withdrawn at the latest by December 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 12628:2022/Amd 1:2025 has been approved by CEN as EN ISO 12628:2022/A1:2025
without any modification.
S
...