oSIST prEN 1501-5:2025
(Main)Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
This document deals with all significant hazards, hazardous situations and events relevant to lifting devices used for the emptying of designated refuse containers into RCVs and their fitting onto the RCVs when they are used as intended and under conditions of misuse which are reasonably foreseeable throughout their foreseeable lifetime as defined in Clause 4.
This document is applicable to the design and construction of the refuse container lifting devices and the mounting of other lifting devices so as to ensure that they are fitted for their function and can be operated, adjusted and maintained during their entire lifetime. It is not applicable to the end of life of the lifting devices.
This document describes and gives the safety requirements of the lifting devices for emptying refuse containers and their interfaces with the corresponding parts of the RCVs and will be used in conjunction with EN 1501-1:202X for the rear, side and front loaded RCVs. It refers to EN 1501-4:2023 for the noise test code.
This document is not applicable to:
- operation in severe conditions e.g. extreme environmental conditions such as:
- temperatures below −20 °C and above +40 °C;
- tropical environment;
- wind velocity in excess of 75 km/h;
- contaminating environment;
- corrosive environment;
- operation in potentially explosive atmospheres;
- lifting and transportation of persons;
- emptying refuse containers other than those manufactured according to EN 840:2020 series, EN 12574:2017 series, EN 13071:2019 series, and those described as paladin, diamond, skip containers;
- loading bulky refuse by means of platform or forks;
- handling of loads the nature of which could lead to dangerous situations (e.g. hot refuses, acids and bases, radioactive materials, contaminated refuse, especially fragile loads, explosives);
- operation on ships;
- fitting and operation on stationary compactors.
This document is not applicable to machinery which is manufactured before the date of its publication by CEN.
Abfallsammelfahrzeuge - Allgemeine Anforderungen und Sicherheitsanforderungen - Teil 5: Schüttungen für Abfallsammelfahrzeuge
Dieses Dokument behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Ereignisse im Hinblick auf Schüttungen, die für die Entleerung von benannten Abfallsammelbehältern in ASF genutzt werden, sowie deren Montage an das ASF, bei bestimmungsgemäßer Verwendung und bei Zuständen von Missbrauch, welche während der voraussichtlichen Lebensdauer vernünftigerweise vorhersehbar sind, wie in Abschnitt 4 festgelegt.
Dieses Dokument ist anzuwenden für die Gestaltung und Konstruktion der Schüttungen für Abfallsammelbehälter und den Anbau anderer Schüttungen, um sicherzustellen, dass sie während ihrer gesamten Lebenszeit für ihre Funktion geeignet sind und dass sie während ihrer gesamten Lebensdauer betrieben, eingestellt und instandgehalten werden können. Es ist nicht anzuwenden für das Ende der Lebensdauer von Schüttungen.
Dieses Dokument beschreibt und bestimmt die Anforderungen an die Schüttungen für die Entleerung von Abfallsammelbehältern und deren Schnittstellen zu den entsprechenden Teilen der ASF und wird zusammen mit EN 1501 1:202X für Heck-, Seiten- sowie Frontlader-ASF angewendet. Es verweist hinsichtlich des Geräuschprüfverfahrens auf EN 1501 4:2023.
Dieses Dokument ist nicht anzuwenden für:
Betrieb unter Extrembedingungen, z. B. extreme Umgebungsbedingungen, wie:
Temperaturen unter −20 °C und über +40 °C;
tropische Umgebung;
Windgeschwindigkeiten von mehr als 75 km/h;
verunreinigende Umgebung;
korrosive Atmosphäre;
Betrieb in explosionsfähigen Atmosphären;
Heben und Befördern von Personen;
Entleeren von Abfallsammelbehältern, mit Ausnahme derer, die nach der Normenreihe EN 840:2020, Normenreihe EN 12574:2017 und Normenreihe EN 13071:2019hergestellt und solcher, die als Paladin-, Diamond- und Absetzbehälter bezeichnet werden;
Laden von Sperrmüll mittels Bühne oder Gabeln;
Handhabung von Ladungen, die Gefährdungssituationen auslösen könnten (z. B. heiße Abfälle, Säuren und Basen, radioaktive Stoffe, verunreinigter Abfall, besonders zerbrechliche Ladungen, Explosivstoffe);
Einsatz auf Schiffen;
Montage und Betrieb auf ortsfesten Verdichtern.
Dieses Dokument ist nicht anzuwenden für Maschinen, die vor dem Datum der Veröffentlichung dieses Dokumentes durch CEN hergestellt wurden.
Véhicules de collecte de déchets - Exigences générales et exigences de sécurité - Partie 5 : Lève-conteneurs pour véhicules de collecte de déchets
Le présent document traite de tous les dangers significatifs, situations et phénomènes dangereux importants, tels que définis à l’Article 4, relatifs aux lève-conteneurs utilisés pour le vidage des conteneurs à déchets prévus dans les V.C.D. et à leur installation sur le V.C.D. lorsqu’ils sont utilisés conformément aux attentes et dans des conditions de mauvaise utilisation raisonnablement prévisibles durant toute leur durée de vie prévue.
Le présent document est applicable à la conception et à la fabrication des lève-conteneurs pour conteneurs à déchets et au montage des autres lève-conteneurs en vue de garantir qu’ils puissent accomplir leur fonction et être utilisés, réglés et entretenus durant leur durée de vie entière. Il ne s’applique pas à la fin de vie des lève-conteneurs.
Le présent document décrit et énonce les exigences de sécurité des lève-conteneurs pour le vidage des conteneurs à déchets et leurs interfaces avec les parties correspondantes des V.C.D. et sera utilisé conjointement avec l’EN 1501-1:202X en ce qui concerne les V.C.D. à chargement arrière, latéral et frontal. Il se réfère à l’EN 1501-4:2023 pour le code d’essai acoustique.
Le présent document ne s’applique pas :
- au fonctionnement dans des conditions difficiles, par exemple, des conditions environnementales extrêmes, telles que :
- des températures inférieures à -20 °C et supérieures à +40 °C ;
- un environnement tropical ;
- une vitesse de vent dépassant 75 km/h ;
- aux milieux polluants ;
- aux environnements corrosifs ;
- au fonctionnement dans des atmosphères potentiellement explosives ;
- au levage et au transport de personnes ;
- au vidage des conteneurs à déchets autres que ceux construits conformément à la série EN 840:2020, à la série EN 12574:2017, à la série EN 13071:2019 et ceux de type paladin, diamant et les bennes skips ;
- au chargement des déchets encombrants à l’aide d’une plate-forme ou de fourches ;
- à la manutention de chargements dont la nature pourrait donner lieu à des situations dangereuses (par exemple, déchets chauds, acides et bases, matériaux radioactifs, déchets contaminés, chargements particulièrement fragiles, explosifs) ;
- au fonctionnement sur les navires ;
- à la fixation et au fonctionnement sur des compacteurs fixes.
Le présent document ne s’applique pas aux machines fabriquées avant la date de sa publication par le CEN.
Vozila za zbiranje odpadkov - Splošne in varnostne zahteve - 5. del: Iztresalniki za vozila za zbiranje odpadkov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2025
Vozila za zbiranje odpadkov - Splošne in varnostne zahteve - 5. del: Iztresalniki za
vozila za zbiranje odpadkov
Refuse collection vehicles - General requirements and safety requirements - Part 5:
Lifting devices for refuse collection vehicles
Abfallsammelfahrzeuge - Allgemeine Anforderungen und Sicherheitsanforderungen -
Teil 5: Schüttungen für Abfallsammelfahrzeuge
Véhicules de collecte de déchets - Exigences générales et exigences de sécurité - Partie
5 : Lève-conteneurs pour véhicules de collecte de déchets
Ta slovenski standard je istoveten z: prEN 1501-5
ICS:
43.160 Vozila za posebne namene Special purpose vehicles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2025
ICS 43.160 Will supersede EN 1501-5:2021
English Version
Refuse collection vehicles - General requirements and
safety requirements - Part 5: Lifting devices for refuse
collection vehicles
Véhicules de collecte de déchets - Exigences générales Abfallsammelfahrzeuge - Allgemeine Anforderungen
et exigences de sécurité - Partie 5 : Lève-conteneurs und Sicherheitsanforderungen - Teil 5: Schüttungen für
pour véhicules de collecte de déchets Abfallsammelfahrzeuge
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 183.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1501-5:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 6
1 Scope . 8
2 Normative references . 9
3 Terms and definitions . 13
4 List of significant hazards . 22
5 Safety requirements and/or protective measures . 25
5.1 General. 25
5.1.1 Introduction . 25
5.1.2 Design . 25
5.1.3 Emptying operating modes and controls of the lifting device . 28
5.2 Requirements for lifting the designated refuse containers . 29
5.2.1 Comb pick-up system for refuse containers according to the EN 840:2020 series and
EN 12574:2017 series . 29
5.2.2 Trunnion pick-up system for containers of the EN 840:2020 series and
EN 12574:2017 series . 31
5.2.3 Diamond pick-up system . 32
5.2.4 BG pick-up system for refuse container according to EN 840-4:2020, Type-B . 32
5.2.5 Pocket pick-up system for refuse container according to EN 12574-1:2017 . 32
5.2.6 Skip container pick-up system . 33
5.2.7 Clamping system . 35
5.3 Requirements for lifting devices mounted on rear loaded RCVs . 35
5.3.1 Operation modes . 35
5.3.2 Dimensions for interchangeable refuse container lifting device . 37
5.3.3 Mechanical interface . 37
5.3.4 Design for interchangeable refuse container lifting device . 38
5.3.5 Footboard(s) . 38
5.3.6 Hydraulic interface for interchangeable refuse container lifting device . 38
5.3.7 Electrical interface for interchangeable refuse container lifting device . 39
5.3.8 Pneumatic interface . 39
5.4 Requirements for refuse container lifting devices mounted on side and front loaded
RCVs . 40
5.4.1 General. 40
5.4.2 Manually loaded side and front-loaded RCVs . 40
5.5 Requirements for loader cranes mounted on RCVs . 40
5.5.1 General. 40
5.5.2 Loading of top lifted and bottom emptied refuse container . 41
5.6 Hydraulic system . 41
5.7 Pneumatic system . 41
5.8 Electric system . 41
5.9 Operating symbols . 42
5.10 Control systems . 43
5.10.1 General requirements for safety circuits . 43
5.10.2 Emergency stop devices . 44
5.10.3 Control circuits and devices. 44
5.11 Requirement for field of vision . 46
5.11.1 Rear, side and front loaded RCVs . 46
5.11.2 Loader cranes . 46
5.12 Electrical components. 46
5.12.1 General . 46
5.12.2 Protective interlocks . 46
5.12.3 Two-hand operating controls. 46
5.12.4 Overload protection. 47
5.12.5 Energy interruption . 47
5.12.6 Position sensors . 47
5.12.7 Terminals and wire connections . 47
5.12.8 Cables . 47
5.12.9 Working light(s) . 47
5.13 Noise . 47
5.14 Maintenance . 48
5.15 Lifting points . 49
5.16 Signals and warning devices . 49
5.17 Fire resistance . 49
6 Verification . 49
7 Information for use . 49
7.1 Signals and warning devices . 49
7.2 Instruction handbook . 49
7.3 Maintenance . 52
7.4 Data sheet . 52
7.5 Marking . 52
Annex A (normative) Danger zones, dimensions and connections . 53
Annex B (informative) Types of special refuse containers and their pick-up systems . 83
Annex C (normative) Requirements for pin connections and data sheets . 92
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2023/1230 aimed to be covered . 98
Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.