SIST ISO 2139:1997
(Main)Continuous mechanical handling equipment for loose bulk materials -- Oscillating conveyors and shaking or reciprocating feeders with tubular trough
Continuous mechanical handling equipment for loose bulk materials -- Oscillating conveyors and shaking or reciprocating feeders with tubular trough
Specifies the basic characteristics (geometrical and physical specifications) of above mentioned handling equipment. Applies to the following types: Tubular trough with closed ends and tubular trough with only one closed end.
Engins de manutention continue pour produits en vrac -- Transporteurs par secousses ou par inertie et distributeurs à mouvement alternatif à auges tubulaires
Naprave za kontinuirni transport sipkih materialov - Nihalni transporterji in dodajalniki v cevni izvedbi
General Information
- Status
- Published
- Publication Date
- 28-Feb-1997
- Technical Committee
- DTN - Lift and transport appliances
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Mar-1997
- Due Date
- 01-Mar-1997
- Completion Date
- 01-Mar-1997
Overview
SIST ISO 2139:1997 is an international standard established by the International Organization for Standardization (ISO) that specifies the basic characteristics of continuous mechanical handling equipment designed for loose bulk materials. This standard focuses on oscillating conveyors and shaking or reciprocating feeders equipped with tubular troughs. It addresses the geometrical and physical specifications essential for ensuring reliable and efficient transport of bulk materials in various industrial processes.
The standard applies specifically to two primary types of tubular troughs used in these handling systems: those with closed ends at both sides and those with only one closed end. By defining essential dimensions, frequencies, and oscillation parameters, SIST ISO 2139:1997 facilitates uniformity and compatibility across equipment designs and applications internationally.
Key Topics
Scope and Application
SIST ISO 2139:1997 covers oscillating conveyors and shaking or reciprocating feeders designed to handle loose bulk materials. It is applicable to machines using tubular troughs, either with ends closed on both sides or just one closed end.Geometrical Specifications
- Diameter (d) of tubular troughs is standardized with preferred sizes ranging from 100 mm up to 800 mm, following the R10 series of preferred numbers.
- Height (h) of inlets and discharges is standardized, depending on diameter ranges (50 mm for smaller diameters and 100 mm for larger).
- Length (l) of troughs follows preferred numerical series (R5, R10, or R20), allowing for standardization and easier equipment design coordination.
Physical Specifications
- Defines oscillation frequencies and distances - oscillation frequencies range between 1 Hz and 10 Hz (60 to 600 oscillations per minute).
- Oscillation distance values conform to the R20 series of preferred numbers.
- These parameters are selected based on flow requirements, material characteristics, trough length, and equipment type.
Equipment Types Covered
- Oscillating conveyors with tubular troughs.
- Shaking or reciprocating feeders with tubular troughs.
Applications
SIST ISO 2139:1997 supports a wide range of industrial sectors where continuous handling of loose bulk materials is critical. Typical applications include:
Mining and Mineral Processing
Efficient transport of ores and mined materials with minimal spillage and material degradation.Agriculture and Food Processing
Conveying grains, seeds, and bulk food ingredients in hygienic and controlled manners.Chemical and Pharmaceutical Industries
Safe and reliable feeding of powdery or granular raw materials into processing equipment.Construction and Cement Production
Handling raw materials such as sand, gravel, and cement powder.Waste Management and Recycling
Controlled feeding of loose waste materials for processing or sorting.
The standardization of dimensions and movement parameters helps optimize equipment performance, reduce maintenance requirements, and ensure interchangeability between different manufacturers’ products.
Related Standards
SIST ISO 2139:1997 interacts closely with other ISO standards focused on bulk material handling and conveyor technology, including but not limited to:
ISO 3: Preferred Numbers
Provides the numerical series (R5, R10, R20) used in the standard for defining geometrical dimensions and oscillation distances.ISO Standards on Mechanical Conveyors
These specify various types of conveyor systems, safety requirements, and design principles relevant for bulk material handling.ISO Standards on Material Handling Equipment Design
Cover broader design aspects and testing protocols to ensure mechanical feeders and conveyors meet performance and safety criteria.
By aligning with these related standards, SIST ISO 2139:1997 contributes to a comprehensive framework for bulk material handling solutions worldwide.
Keywords: ISO 2139, oscillating conveyors, shaking feeders, reciprocating feeders, tubular trough, bulk material handling, continuous mechanical handling equipment, conveyor standard, oscillation frequency, geometrical specifications, bulk transport equipment.
ISO 2139:1975 - Continuous mechanical handling equipment for loose bulk materials -- Oscillating conveyors and shaking or reciprocating feeders with tubular trough
ISO 2139:1975 - Engins de manutention continue pour produits en vrac -- Transporteurs par secousses ou par inertie et distributeurs a mouvement alternatif a auges tubulaires
ISO 2139:1975 - Engins de manutention continue pour produits en vrac -- Transporteurs par secousses ou par inertie et distributeurs a mouvement alternatif a auges tubulaires
Frequently Asked Questions
SIST ISO 2139:1997 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Continuous mechanical handling equipment for loose bulk materials -- Oscillating conveyors and shaking or reciprocating feeders with tubular trough". This standard covers: Specifies the basic characteristics (geometrical and physical specifications) of above mentioned handling equipment. Applies to the following types: Tubular trough with closed ends and tubular trough with only one closed end.
Specifies the basic characteristics (geometrical and physical specifications) of above mentioned handling equipment. Applies to the following types: Tubular trough with closed ends and tubular trough with only one closed end.
SIST ISO 2139:1997 is classified under the following ICS (International Classification for Standards) categories: 53.040.10 - Conveyors. The ICS classification helps identify the subject area and facilitates finding related standards.
You can purchase SIST ISO 2139:1997 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-1997
Naprave za kontinuirni transport sipkih materialov - Nihalni transporterji in
dodajalniki v cevni izvedbi
Continuous mechanical handling equipment for loose bulk materials -- Oscillating
conveyors and shaking or reciprocating feeders with tubular trough
Engins de manutention continue pour produits en vrac -- Transporteurs par secousses
ou par inertie et distributeurs à mouvement alternatif à auges tubulaires
Ta slovenski standard je istoveten z: ISO 2139:1975
ICS:
53.040.10 Transporterji Conveyors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION F(-jR STANDARDIZATION .ME-x,-JVHAPOJHAfi OPTAHM3AUMJl I-IO CTAHAAPTM3AUMM.ORGANISATION INTERNATIONALE DE NORMALISATION
Continuous mechanical handling equipment for loose
bulk materials - Oscillating conveyors and shaking or
reciprocating feeders with tubular trough
Transporteurs par secousses ou par inertie
Engins de manuten tion con tinue pour produits en vrac -
et distribu teurs 2 mouvemen t alterna tif 2 auges tubulaires
First edition - 1975-11-01
Ref. No. ISO 21394975 (El
UDC 621.867.5
mechanical feeders, specifications,
Descriptors : handling equipment, continuous handling, bul k products, conveyors, oscillating conveyors,
dimensions.
Price based on 2 pages
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO Member Bodies). The work sf developing
International Standards is carried out through ISO Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the ISO Council.
Prior to 1972, the results of the work of the Technical Committees were published
as ISO Recommendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee ISO/TC 101 has reviewed ISO Recommendation R 2139 and found it
technically suitable for transformati
...
INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION F(-jR STANDARDIZATION .ME-x,-JVHAPOJHAfi OPTAHM3AUMJl I-IO CTAHAAPTM3AUMM.ORGANISATION INTERNATIONALE DE NORMALISATION
Continuous mechanical handling equipment for loose
bulk materials - Oscillating conveyors and shaking or
reciprocating feeders with tubular trough
Transporteurs par secousses ou par inertie
Engins de manuten tion con tinue pour produits en vrac -
et distribu teurs 2 mouvemen t alterna tif 2 auges tubulaires
First edition - 1975-11-01
Ref. No. ISO 21394975 (El
UDC 621.867.5
mechanical feeders, specifications,
Descriptors : handling equipment, continuous handling, bul k products, conveyors, oscillating conveyors,
dimensions.
Price based on 2 pages
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO Member Bodies). The work sf developing
International Standards is carried out through ISO Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the ISO Council.
Prior to 1972, the results of the work of the Technical Committees were published
as ISO Recommendations; these documents are now in the process of being
transformed into International Standards. As part of this process, Technical
Committee ISO/TC 101 has reviewed ISO Recommendation R 2139 and found it
technically suitable for transformation. International Standard ISO 2139 therefore
replaces ISO Recommendation R 2139-1971 to which it is technically identical.
ISO Recommendation R 2139 was approved by the Member Bodies of the
following countries :
Austria I ndia Swede n
Belgium I reland Thailand
Czechoslovakia Japan Turkey
Egypt, Arab Rep. of Netherlands United Kingdom
France South Africa, Rep. of U.S.A.
Germany Spain U.S.S. R.
No M
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATI()N FOR STANDARDIZATION *ME-jKJJ’HAPOflHAA OPI-AHM3AUMfi Il0 CTAHLlAPTM3AUMM~ORGANlSATION INTERNATIONALE DE NORMALISATION
Engins de manutention continue pour produits en vrac -
Transporteurs par secousses ou par inertie et distributeurs
à mouvement alternatif à auges tubulaires
Con tinuous mechanical handling equipmen t for loose bulk materials - Oscilla ting conve yors and
shaking or reciprocating feeders with tubular trough
Première édition - 1975-I l-01
iî
Y
Réf. no : ISO 2133-1975 (F)
CDU 621.867.5
Ln
b
Descripteurs : matériel de manutention, manutention continue, produit en vrac, transporteur, transporteur par secousses, chargeur mécanique,
spécification, dimension.
Prix basé sur 2 pages
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres ISO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant.
Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
Avant 1972, les résultats des travaux des Comités Techniques étaient publiés
comme Recommandations ISO; maintenant, ces documents sont en cours de
transformation en Normes Internationales. Compte tenu de cette procédure, le
Comité Technique ISO/TC 101 a examiné la Recommandation ISO/R 2139 et est
d’avis qu’elle peut, du point de vue technique, être transformée en Norme
Internationale. La Norme Internationale remplace donc la -
présente
Recommandation ISO/R 21394971 à laquelle elle est techniquement identique.
La Recommandation lSO/R 2139 avait été approuvée par les Comités Membres des
pays suivants :
Afrique du Sud, Rép. d’ France Suède
Allemagne Inde Tchécoslovaquie
Autriche Irlande Thaïlande
Belgique Japon Turquie
Égypte, Rép. arabe d’ Pays-Bas * U. R .S.S.
Espagne Royaume-Uni U.S.A.
Auc
...
NORME INTERNATIONALE
INTERNATIONAL ORGANIZATI()N FOR STANDARDIZATION *ME-jKJJ’HAPOflHAA OPI-AHM3AUMfi Il0 CTAHLlAPTM3AUMM~ORGANlSATION INTERNATIONALE DE NORMALISATION
Engins de manutention continue pour produits en vrac -
Transporteurs par secousses ou par inertie et distributeurs
à mouvement alternatif à auges tubulaires
Con tinuous mechanical handling equipmen t for loose bulk materials - Oscilla ting conve yors and
shaking or reciprocating feeders with tubular trough
Première édition - 1975-I l-01
iî
Y
Réf. no : ISO 2133-1975 (F)
CDU 621.867.5
Ln
b
Descripteurs : matériel de manutention, manutention continue, produit en vrac, transporteur, transporteur par secousses, chargeur mécanique,
spécification, dimension.
Prix basé sur 2 pages
AVANT-PROPOS
L’ISO (Organisation Internationale de Normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (Comités Membres ISO). L’élaboration de
Normes Internationales est confiée aux Comités Techniques ISO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant.
Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I’ISO.
Avant 1972, les résultats des travaux des Comités Techniques étaient publiés
comme Recommandations ISO; maintenant, ces documents sont en cours de
transformation en Normes Internationales. Compte tenu de cette procédure, le
Comité Technique ISO/TC 101 a examiné la Recommandation ISO/R 2139 et est
d’avis qu’elle peut, du point de vue technique, être transformée en Norme
Internationale. La Norme Internationale remplace donc la -
présente
Recommandation ISO/R 21394971 à laquelle elle est techniquement identique.
La Recommandation lSO/R 2139 avait été approuvée par les Comités Membres des
pays suivants :
Afrique du Sud, Rép. d’ France Suède
Allemagne Inde Tchécoslovaquie
Autriche Irlande Thaïlande
Belgique Japon Turquie
Égypte, Rép. arabe d’ Pays-Bas * U. R .S.S.
Espagne Royaume-Uni U.S.A.
Auc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...