kSIST fprEN IEC 61000-4-41:2024

SLOVENSKI STANDARD
oSIST prEN IEC 61000-4-41:2024
01-april-2024
Elektromagnetna združljivost (EMC) - 4-41. del: Preskusne in merilne tehnike -
Preskusi odpornosti proti širokopasovnemu sevanju
Electromagnetic compatibility (EMC) - Part 4-41: Testing and measurement techniques -
Broadband radiated immunity tests
Ta slovenski standard je istoveten z: prEN IEC 61000-4-41:2024
ICS:
33.100.20 Imunost Immunity
oSIST prEN IEC 61000-4-41:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 61000-4-41:2024

oSIST prEN IEC 61000-4-41:2024
77B/884/CDV
COMMITTEE DRAFT FOR VOTE (CDV)

PROJECT NUMBER:
IEC 61000-4-41 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-02-09 2024-05-03
SUPERSEDES DOCUMENTS:
77B/870/CD, 77B/881/CC
IEC SC 77B : HIGH FREQUENCY PHENOMENA
SECRETARIAT: SECRETARY:
France Mr Franck GRUFFAZ
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

CIS/A,CIS/F,CIS/H,CIS/I
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Electromagnetic compatibility (EMC) - Part 4-41: Testing and measurement techniques -
Broadband radiated immunity tests

PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.

oSIST prEN IEC 61000-4-41:2024

IEC CDV 61000-4-41/Ed1 © IEC:2024 – 2 – 77B/884/CDV
1 CONTENTS
3 FOREWORD . 4
4 INTRODUCTION . 6
5 1 Scope . 7
6 2 Normative references . 7
7 3 Terms and definitions . 7
8 4 General . 8
9 5 Test levels and test signal . 9
10 5.1 Test levels . 9
11 5.2 Test signal . 10
12 5.3 Frequency range and test signal bandwidth . 13
13 5.4 Spectrum mask . 13
14 5.5 Frequency stepping . 15
15 5.6 Selection of level . 15
16 6 Test equipment and level adjustment procedure . 16
17 6.1 Test instrumentation . 16
18 6.2 Description of the test facility . 16
19 6.3 Uniform field area and validation of the spectrum shape . 16
20 6.3.1 General . 16
21 6.3.2 Validation of the spectrum shape . 17
22 7 Test setup . 17
23 8 Test procedure . 18
24 8.1 General . 18
25 8.2 Step size and test signal bandwidth . 18
26 8.3 Test signal and level setting . 18
27 9 Evaluation of the test results . 18
28 10 Test report . 18
29 Annex A (informative) Information on test signal generation . 20
30 A.1 General . 20
31 A.2 True random noise generation . 20
32 A.3 Pseudo noise sequence . 21
33 Annex B (informative)  Field generating antennas . 24
34 B.1 General . 24
35 Annex C (informative)  4G and 5G signals . 25
36 C.1 Overview of the radio interface technology of 4G and 5G . 25
37 C.1.1 Overview of the component RIT: E-UTRA/LTE . 25
38 C.1.2 Overview of the Component RIT: NR . 28
39 C.2 Simulation of the 5G Signal . 28
40 C.3 Application of a test model signal . 30
41 Annex D (informative)  Guide for selecting test levels . 33
42 D.1 General . 33
43 D.2 Test levels related to general purposes . 33
44 D.3 Test levels related to the protection against RF emissions from 4G/5G
45 communications . 34

oSIST prEN IEC 61000-4-41:2024

IEC CDV 61000-4-41/Ed1 © IEC:2024 – 3 – 77B/884/CDV
46 D.4 Guide to derive test level from field distribution . 37
47 Annex E (informative)  Measurement uncertainty due to test instrumentation . 39
48 E.1 General . 39
49 Annex F (informative)  Test signal characterization . 40
50 F.1 General . 40
51 F.2 Test signal generation. 40
52 F.3 Definition of the crest factor . 40
53 F.4 Crest factor determination . 41
54 F.4.1 Mathematical determination for arbitrary waveform generator use . 41
55 F.4.2 The complementary cumulative distribution function (CCDF) . 41
56 F.5 Amplifier saturation . 42
57 F.6 Measurement methods . 43
58 F.6.1 General . 43
59 F.6.2 Spectrum analyser method . 43
60 F.6.3 Time domain measurement with a fast oscilloscope . 44
61 F.6.4 Power meter method. 45
62 F.7 Comparison of crest factor measurement results . 45
63 Bibliography . 47
65 Figure 1: Example of a 100 MHz wide test signal in frequency domain . 11
66 Figure 2: Example of the envelope of a 100 MHz wide test signal in time domain . 12
67 Figure 3: Pulse modulated test signal, Period time 10 ms, 50 % duty cycle . 12
68 Figure 4 Spectrum mask of the broadband test signal at the output of the power
69 amplifier. 14
71 Table 1 – Test levels. 10
72 Table 3 – Frequency ranges and test signal bandwidth . 13
73 Table 4 – Test signal requirements . 14
74 Table F.1 - Measurement of crest factors with different methods . 46
oSIST prEN IEC 61000-4-41:2024

IEC CDV 61000-4-41/Ed1 © IEC:2024 – 4 – 77B/884/CDV
76 INTERNATIONAL ELECTROTECHNICAL COMMISSION
77 ____________
79 ELECTROMAGNETIC COMPATIBILITY (EMC)
81 Part 4-41: Testing and measurement techniques –
82 Broadband radiated immunity tests
86 FOREWORD
87 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
88 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
89 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
90 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
91 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
92 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
93 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
94 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
95 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
96 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
97 consensus of opinion on the relevant subjects since each technical committee has representation from all
98 interested IEC National Committees.
99 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
100 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
101 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
102 misinterpretation by any end user.
103 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
104 transparently to the maximum extent possible in their national and regional publications. Any divergence between
105 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
106 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
107 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
108 services carried out by independent certification bodies.
109 6) All users should ensure that they have the latest edition of this publication.
110 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
111 members of its technical committees and IEC National Committees for any personal injury, property damage or
112 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
113 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
114 Publications.
115 8) Atte
...