SIST EN 61076-7-001:2005

SLOVENSKI SIST EN 61076-7-001:2005

STANDARD
december 2005
Konektorji za elektronsko opremo – 7-001. del: Pribor za kabelske izvode –
Okvirna podrobna specifikacija (IEC 61076-7-001:2004)
Connectors for electronic equipment – Part 7-001: Cable outlet accessories – Blank
detail specification (IEC 61076-7-001:2004)
ICS 31.220.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 61076-7-001
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2004

ICS 31.220.10
English version
Connectors for electronic equipment
Part 7-001: Cable outlet accessories –
Blank detail specification
(IEC 61076-7-001:2004)
Connecteurs pour équipements Steckverbinder für elektronische
éléctroniques Einrichtungen
Partie 7-001: Accessoires de sorties Teil 7-001: Kabelausgangszubehör -
de câbles – Vordruck für Bauartspezifikation
Spécification particulière cadre (IEC 61076-7-001:2004)
(CEI 61076-7-001:2004)
This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61076-7-001:2004 E

Foreword
The text of document 48B/1448/FDIS, future edition 1 of IEC 61076-7-001, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61076-7-001 on 2004-09-01.
This European Standard is to be used in conjunction with EN 61076-7.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61076-7-001:2004 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 61076-7-001:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2
)
IEC 61076-1 - Connectors with assessed quality, for use EN 61076-1 1995
in d.c., low frequency analogue and in
digital high-speed data applications
Part 1: Generic specification - Capability
approval
1) 2)
IEC 61076-7 - Part 7: Cable outlet accessories with EN 61076-7 2000
assessed quality, including qualification
and capability approval - Sectional
specification
1)
ISO 129 - Technical drawings - Dimensioning - - -
General principles, definitions, methods
of execution and special indications

1)
ISO 1101 - Technical drawings - Geometrical - -
tolerancing - Tolerancing of form,
orientation, location and run-out -
Generalities, definitions, symbols,
indications on drawings
1)
Undated reference.
2)
Valid edition at date of issue.

NORME CEI
INTERNATIONALE IEC
61076-7-001
INTERNATIONAL
Première édition
STANDARD
First edition
2004-07
Connecteurs pour équipements électroniques –
Partie 7-001:
Accessoires de sorties de câbles –
Spécification particulière cadre
Connectors for electronic equipment –
Part 7-001:
Cable outlet accessories –
Blank detail specification
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
PRICE CODE H
Commission Electrotechnique Internationale
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61076-7-001 © IEC:2004 – 3 –
CONTENTS
FOREWORD.5
1 Preparation of detail specifications .9
1.1 Title of detail specification .9
1.2 Drawing information .9
1.2.1 Projection method and dimensioning system .9
1.2.2 Drawings and dimensions.9
1.3 System of lettering .11
1.4 Normative references .11
2 Contents of a detail specification .11
2.1 Title.13
2.2 Scope.13
2.3 Type designation.13
2.4 Common features and isometric view .13
2.5 Dimensions and mass .13
2.6 Gauges, jigs and fixtures.13
2.7 Characteristics .13
2.8 Test schedule.15
2.9 Quality assessment .15
2.10 Capability assessment.15
2.11 Ordering information.15

61076-7-001 © IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
Part 7-001: Cable outlet accessories –
Blank detail specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for in
...