SIST EN 2267-002:2014

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 002: AllgemeinesSérie aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 002: GénéralitésAerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 002: General49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2267-002:2012SIST EN 2267-002:2014en,fr,de01-februar-2014SIST EN 2267-002:2014SLOVENSKI
STANDARDSIST EN 2267-002:20061DGRPHãþD



SIST EN 2267-002:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2267-002
October 2012 ICS 49.060 Supersedes EN 2267-002:2005English Version
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 002: General
Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 002: Généralités
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 002: Allgemeines This European Standard was approved by CEN on 25 February 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2267-002:2012: ESIST EN 2267-002:2014



EN 2267-002:2012 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms, definitions and symbols .54List of product standards .55Materials and construction .66Identification and marking .97Technical specification . 10 SIST EN 2267-002:2014



EN 2267-002:2012 (E) 3 Foreword This document (EN 2267-002:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the latest by April 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 2267-002:2005. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 2267-002:2014



EN 2267-002:2012 (E) 4 1 Scope This European Standard specifies the list of product standards and common characteristics of electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 260 °C (except otherwise specified in product standards). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series
Copper or copper alloy conductors for electrical cables
Product standard EN 2084, Aerospace series
Cables, electric, single-core, general purpose, with conductors in copper or copper alloy
Technical specification
EN 2235, Aerospace series — Single and multicore electrical cables, screened and jacketed
EN 2267-003, Aerospace series
Cables, electrical, for general purpose
Operating temperatures between − 55 °C and 260 °C
Part 003: Ink jet printable
Product standard
EN 2267-004, Aerospace series
Cables, electrical, for general purpose
Operating temperatures between − 55 °C and 260 °C
Part 004: CO2 laser printable
Product standard 1) EN 2267-005, Aerospace series
Cables, electrical, for general purpose
Operating temperatures between − 55 °C and 260 °C
Part 005: UV laser printable — Product standard
EN 2267-006, Aerospace series
Cables, electrical, for general purpose
Operating temperatures between − 55 °C and 260 °C
Part 006: YAG X3 laser printable
Product standard 1) EN 2267-007, Aerospace series
Cables, electrical, for general purpose
Operating temperatures between − 55 °C and 260 °C
Part 007: DMA family, single ink-jet printable and multicore assembly
Product standard
EN 2267-008, Aerospace series – Cables, electrical, for general purpose
Operating temperatures between − 55 °C and 260 °C
Part 008: DM family, single UV laser printable and multicore assembly
Product standard
EN 2267-009, Aerospace series
Cables, electrical, for gener
...