SIST EN 2267-002:2006

SLOVENSKI STANDARD
SIST EN 2267-002:2006
01-julij-2006
$HURQDYWLND±(OHNWULþQLNDEOL]DVSORãQRXSRUDER±'HORYQHWHPSHUDWXUHPHG±
ƒ&LQƒ&±GHO6SORãQR
Aerospace series - Cables, electrical, for general purpose - Operating temperatures
between - 55 °C and 260 °C - Part 002: General
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung -
Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 002: Allgemeines
Série aérospatiale - Câbles, électriques, d'usage général , températures de
fonctionnement comprises entre - 55 °C et 260 °C - Partie 002 : Généralités
Ta slovenski standard je istoveten z: EN 2267-002:2005
ICS:
49.060
SIST EN 2267-002:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 2267-002

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2005
ICS 49.060
English Version
Aerospace series - Cables, electrical, for general purpose -
Operating temperatures between - 55 °C and 260 °C - Part 002:
General
Série aérospatiale - Câbles, électriques, d'usage général , Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine
températures de fonctionnement comprises entre - 55 °C et Verwendung - Betriebstemperaturen zwischen - 55 °C und
260 °C - Partie 002 : Généralités 260 °C - Teil 002: Allgemeines
This European Standard was approved by CEN on 26 September 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2267-002:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 2267-002:2005 (E)
Contents Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms, definitions and symbols .5
4 List of product standards.5
5 Materials and construction.5
6 Identification and marking.8
7 Technical specification.9


2

---------------------- Page: 3 ----------------------

EN 2267-002:2005 (E)
Foreword
This European Standard (EN 2267-002:2005) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the
latest by May 2006.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and the United Kingdom.
3

---------------------- Page: 4 ----------------------

EN 2267-002:2005 (E)
1 Scope
This standard specifies the list of product standards and common characteristics of electrical cables for use in
the on-board electrical systems of aircraft at operating temperatures between − 55 °C and 260 °C (except
otherwise specified in product standards).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 2083, Aerospace series ― Copper or copper alloy conductors for electrical cables ― Product standard.
EN 2084, Aerospace series ― Cables, electric, single-core, general purpose, with conductors in copper or
copper alloy ― Technical specification.
EN 2235, Aerospace series — Single and multicore electrical cables, screened and jacketed — Technical
1)
specification.
EN 2267-003, Aerospace series ― Cables, electrical, for general purpose ― Operating temperatures between
− 55 °C and 260 °C ― Part 003: Ink jet printable ― Product standard.
EN 2267-004, Aerospace series ― Cables, electrical, for general purpose ― Operating temperatures between
1)
− 55 °C and 260 °C ― Part 004: CO laser printable ― Product standard.
2
EN 2267-005, Aerospace series ― Cables, electrical, for general purpose ― Operating temperatures between
− 55 °C and 260 °C ― Part 005: UV laser printable – Product standard.
EN 2267-006, Aerospace series ― Cables, electrical, for general purpose ― Operating temperatures between
1)
− 55 °C and 260 °C ― Part 006: YAG X3 laser printable ― Product standard.
EN 2267-007, Aerospace series ― Cables, electrical, for general purpose ― Operating temperatures between
− 55 °C and 260 °C ― Part 007: DMA family, single ink-jet printable and multicore assembly ― Product
standard.
EN 2267-008, Aerospace series – Cables, e
...